|
|
-
4.7 of 5.0 with 12 Reviews
SALE PRICE: $389.77 1% OFF
Manufacturer: VERMONT GAGE
Brand: Vermont Gage
Manufacturer: VERMONT GAGE
Brand: Vermont Gage
NIST traceable. Material: 52100 tool steel Length: 2" Finish: 10µ" or better Within .0001" round. Marked with size & direction of tolerance on gages over .060".
-
4.7 of 5.0 with 23 Reviews
SALE PRICE: $414.00 1% OFF
Manufacturer: Fluke Calibration
Brand: Fluke
Model: 9171-INSA
Manufacturer: Fluke Calibration
Brand: Fluke
Model: 9171-INSA
This inserts are ordered with 9171 Series Metrology Well Calibrators accommodating a variety of metric- and imperial-sized probe diameters.
-
4.7 of 5.0 with 36 Reviews
SALE PRICE: $449.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 2540548
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 2540548
Fluke 1 A AC/DC power shunt.
-
4.7 of 5.0 with 28 Reviews
SALE PRICE: $451.50
Manufacturer: LK Industries
Brand: L-K Industries
Model: LK-TB200
Manufacturer: LK Industries
Brand: L-K Industries
Model: LK-TB200
Lp gas corrosion Test cylinder
-
4.7 of 5.0 with 44 Reviews
SALE PRICE: $465.75 1% OFF
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
The Series CHP Pneumatic Hand Pump is the most dependable and rugged pump for applications up to 100 psi or 28.8" Hg vacuum. The durable Acetal plastic and anodized aluminum construction prevents body heat transfer, resulting in drift-free, accurate readings. The Series CHP is equipped with oversized check valves in order to provide smooth and controlled operation. Dual O-Rings on all pistons ensure the pump to be leak-free. The unit includes a 2 foot long hose, 1/8" female NPT gage fitting, and 1/8" NPT pipe plug. The Series CHP is ideal for checking calibration of pressure or vacuum gages, switches, or transmitters.
-
4.7 of 5.0 with 35 Reviews
SALE PRICE: $468.04 5% OFF
Manufacturer: Martel Electronics
Brand: Martel Electronics
Model: 1919777
Manufacturer: Martel Electronics
Brand: Martel Electronics
Model: 1919777
|
The BetaGauge PI PRO builds on the proven performance of the BetaGauge PI with a new purpose designed Zinc-Aluminum Alloy High Pressure Cast housing. The new housing improves the environmental integrity of the gauge in a lighter and smaller yet more rugged form factor. By adding a simple calibration pump, you can turn the Pi-Pro in to a complete pressure calibration solution. The BetaGauge PI-Pro takes the concept of an analog Test Gauge, and brings it to a new level, as only MARTEL can do. The calibration gauge combines the accuracy of digital technology with the simplicity of an analog gauge, and achieves performance, ease-of-use, and a feature set unmatched in the pressure measurement world. Setup of the pressure calibration gauge is fast and straightforward, through a menu-driven display, with minimal text, and intuitive functions, that is simple enough to allow the digital test gauge to be used anywhere in the world, without the need for multilingual displays.
-
4.7 of 5.0 with 38 Reviews
SALE PRICE: $478.58 1% OFF
Manufacturer: ohaus
Brand: Ohaus
Model: RC31P1502
Manufacturer: ohaus
Brand: Ohaus
Model: RC31P1502
The Ohaus Ranger Count 3000 is a high-precision dedicated counting scale with advanced software for counting and packaging parts. With low Average Piece Weight (APW) alert and automatic APW recalculation, the Ranger Count offers 1:1,500,000 internal counting resolution to handle counting even the smallest parts precisely. Standard features include precise counting and weighing performance with a 30 item library, 3 backlit LCD displays including a centrally located count display, easy-to-navigate menu, rapid stabilization, RS232 port, integrated carrying handle, rechargeable battery powering the scale for over 200 hours, stability indicator, low battery indicator, auto shut-off, auto tare and more.
-
4.7 of 5.0 with 60 Reviews
SALE PRICE: $487.83
Manufacturer: Fluke
Brand: Fluke
Model: FLUKE-88-5/A KIT
Color: Automotive Multimeter Combo Kit
Manufacturer: Fluke
Brand: Fluke
Model: FLUKE-88-5/A KIT
Color: Automotive Multimeter Combo Kit
|
The Fluke 88 V/A KIT Automotive Multimeter Combo Kit comes with the 88 Series V automotive multimeter, silicone test leads, alligator clips, test probes, inductive RPM pick-up probe, ToolPak magnetic meter hanging kit, temperature probe, two automotive backprobe pins, insulation piercing probe, and a durable carrying case. The digital multimeter (also known as a multitester) is designed for use in high energy environments such as those found on hybrid vehicles and measures AC/DC voltage up to 1,000V, AC/DC current to 10 amp (20 amp for a maximum of 30 seconds), frequency to 200 kilohertz, resistance to 50 megaohms, capacitance to 9,999 microfarads, temperature from -200 to +1090 degrees C (-328 to +1994 degrees F) and includes continuity and diode tests. The 6,000-count resolution, 3-3/4 digit digital display has a bright white backlight for readability in low-light conditions with a 4-1/2 digit mode for precise measurements and displays an analog bar graph which is useful for fast-changing or unstable signals. The meter performs millisecond pulse width measurements for fuel injectors and has Min./Max.-Average recording as well as a Min./Max. Alert to automatically capture variations. A duty cycle indicates the percentage of time a signal is above or below the trigger level during one cycle and a peak capture function detects intermittent problems and transients as low as 250 microseconds. The meter has both manual- and auto-ranging modes for user flexibility, and an auto-hold function to capture stable readings. The relative mode removes test lead resistance from low ohms measurements. This meter is safety rated for Category III up to 1000V and Category IV up to 600V and can withstand hazardous volt spikes in excess of 8,000V to reduce risks of spikes and surges caused by load switching and faults on industrial circuits. It uses a 9V battery (installed) that has a battery life of approximately 400 hours without backlight and has a selectable sleep mode to maximize battery life. The meter measures 20.1 x 9.8 x 5....
-
4.7 of 5.0 with 39 Reviews
SALE PRICE: $501.00 7% OFF
Manufacturer: Ohaus
Brand: Ohaus
Model: 80780101
Manufacturer: Ohaus
Brand: Ohaus
Model: 80780101
|
The Ohaus metric, stainless steel calibration weight set meets American Society for Testing and Materials (ASTM) Class 4 specifications and designed for calibrating other weights, or electronic balances and scales (set of 21). The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The set includes two each of 20g, 2g, 200mg, 20mg, and 2mg weights, one each of 100g, 50g, 10g, 5g, 1g, 500mg, 100mg, 50mg, 10mg, 5mg, and 1mg weights, tweezers, and a hinged box with foam packaging for each weight. The weight meets ASTM E617, Class 4 specification for use as a reference standard for calibrating semi-analytic balances, and for student use. Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certified weights are used in labs where a high degree of accuracy and repeatability is required. Uncertified weights are used where a lower degree of accuracy is required, including student laboratories, rough weighting operations, and measuring force. Hooked and slotted weights are often used to measure pressure, torque, and tensile strength, and to demonstrate basic laws of physics. Calibration weights differ from lab weights, which are general purpose weights used to hold an object in place, similar to a paperweight. Science education products incorporate applied math and science principles into classroom projects. Teachers in pre-K, elementary, and secondary classrooms use science education kits and products alongside science, technology, engineering, and math (STEM) curriculum to demonstrate STEM concepts and real-world applications through hands-on activities. Science education projects include a broad range of activities, such as practical experiments in engineering, aeronautics, robotics, energy, chemistry, physics, biology, and geology...
-
4.7 of 5.0 with 35 Reviews
SALE PRICE: $521.50 1% OFF
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4401-1602
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4401-1602
HHIP granite surface plate stand comes with leveling screws. Made of heavy gauge steel with durable baked enamel finish. Assembly required. Overall working height is 36". weight capacity is 115 lbs.
|
|