|
|
-
4.6 of 5.0 with 1 Reviews
SALE PRICE: $102.79
Manufacturer: Ohaus
Brand: Ohaus
Model: 80780026
Manufacturer: Ohaus
Brand: Ohaus
Model: 80780026
|
The Ohaus metric, stainless steel electronic balance calibration weight meets American Society for Testing and Materials (ASTM) Class 1 specifications, and is designed for calibrating other weights, or electronic balances and scales. The weight has straight sides and a flat top that allows weights to be stacked. It is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets ASTM E617, Class 1 specification for use as a reference standard for calibrating other weights and high-precision balances with readabilities as low as 0.1mg to 0.01mg. An optional National Voluntary Laboratory Accreditation Program (NVLAP) certificate ensures precision and traceability.The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found†mass correction (for recalibration), “As Left†mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Accreditation Cooperation (ILAC), The Asia Pacific Laboratory Accreditation Cooperation (APLAC) and The National Cooperation for Laboratory Accreditation (NACLA). Calibration weights are used to measure the ...
-
4.6 of 5.0 with 36 Reviews
SALE PRICE: $103.71 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614611-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614611-521
|
The Mitutoyo grade 00 square gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in metric [millimeter (mm)], and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 24.1 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks...
-
4.6 of 5.0 with 50 Reviews
SALE PRICE: $104.54 3% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Designed for calibrating micrometers and zeroing vernier, dial, and digital calipers. 3/8" tubular with 1/4" diameter flat ends. Standard have two insulating grips to protect rods from heat of hands. Meets federal specifications.
-
4.6 of 5.0 with 46 Reviews
SALE PRICE: $106.05 1% OFF
Manufacturer: LK Industries
Brand: Lufkin
Model: 9OCN1291S
Manufacturer: LK Industries
Brand: Lufkin
Model: 9OCN1291S
Lufkin 33' refill gauge tape.
-
4.6 of 5.0 with 22 Reviews
SALE PRICE: $108.18
Manufacturer: Ohaus
Brand: Ohaus
Model: 80850296
Manufacturer: Ohaus
Brand: Ohaus
Model: 80850296
|
The Ohaus metric, stainless steel precision calibration weight meets American Society for Testing and Materials (ASTM) Class 4 specifications, and is designed for use as a reference standard for calibrating other weights, or electronic balances and scales. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. A tapered neck enables the weight to be lifted with tweezers, reducing the risk of contaminants adhering to the weight. The weight meets ASTM E617, Class 4 specification for use as a reference standard for calibrating semi-analytic balances, and for student use. An optional National Voluntary Laboratory Accreditation Program (NVLAP) certificate ensures precision and traceability. The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found†mass correction (for recalibration), “As Left†mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Accreditation Cooperation (ILAC), The Asia Pacific Laboratory Accreditation Cooperation (APLAC) and The National Cooperation for Laboratory Accreditation (NACLA). Calibration we...
-
4.6 of 5.0 with 23 Reviews
SALE PRICE: $110.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 619052
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 619052
|
The Mitutoyo 619052 plain jaw is for use with square gage blocks to build a measuring instrument for machining tasks and calibration of tools. This item can be used to measure inside or outside diameters. It is constructed of steel for durability and the surfaces are lapped for accuracy. The base width of this instrument is 24.7 mm, the tab width is 9 mm, the total height is 39.9 mm, and the thickness is 0.5".Gage blocks (also called gauge blocks, Jo blocks, Hoke blocks, and Johansson gauges) are precision ground and lapped metal or ceramic blocks, used for calibrating precision measuring equipment and as a length standard in manufacturing. Gage blocks are square or rectangular in shape, with flat and parallel measuring surfaces, and usually have an engraved unique serial number and nominal length (provided in either inches or millimeters). They often come in sets with blocks of varying lengths, so that many different standard lengths can be created by stacking and wringing them. Wringing is the process of sliding blocks together with a small amount of pressure, in order to create a longer gage block stack.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.
-
4.6 of 5.0 with 21 Reviews
SALE PRICE: $114.08
Manufacturer: Ohaus
Brand: Ohaus
Model: 80780295
Manufacturer: Ohaus
Brand: Ohaus
Model: 80780295
|
The Ohaus metric, stainless steel calibration weight meets International Organization of Legal Metrology (OIML) Class E2 specifications and designed for calibrating other weights, or electronic balances and scales. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets OIML R111 Class E2 specifications for use as a reference standard calibrating other weights, and calibrating high precision analytical balances with readabilities as low as 0.1mg to 0.01mg. The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found†mass correction (for recalibration), “As Left†mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Accreditation Cooperation (ILAC), The Asia Pacific Laboratory Accreditation Cooperation (APLAC) and The National Cooperation for Laboratory Accreditation (NACLA). Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidel...
-
4.6 of 5.0 with 21 Reviews
SALE PRICE: $114.29 65% OFF
Manufacturer: Mettler Toledo
Brand: Mettler Toledo
Manufacturer: Mettler Toledo
Brand: Mettler Toledo
Perform safe routine testing of your balances with precisely what need - a METTLER TOLEDO CarePac with just two ASTM Class 1 5 grams and 0.2 grams test weights. This unique approach means you can rely on accurate measuring results and save time and money. CarePacs include ergonomic tweezers as well as clean - room approved gloves and cleaning cloths. Purchase an additional 3rd weight for customized testing such as determination of minimum weight.
-
4.6 of 5.0 with 15 Reviews
SALE PRICE: $114.97 1% OFF
Manufacturer: LK Industries
Brand: US Tape Company
Model: GTDD25COMP
Manufacturer: LK Industries
Brand: US Tape Company
Model: GTDD25COMP
US tape 25' complete unit gauge tape.
-
4.6 of 5.0 with 39 Reviews
SALE PRICE: $116.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: EBC290
Manufacturer: Fluke Corporation
Brand: Fluke
Model: EBC290
External battery charger for use with BP290 and BP291 LI-ion Batteries.
|
|