Calibration - Page 94

Manufacturer: Palmer Instruments, Inc. Brand: Palmer Model: MPTKR

The Palmer MPT Residential Kit contains one MPTA Ace Tester (featuring three ¼" NPT Ports and four internal NPT threads of 1", ¾", ½", and 3/8"). Tester is made of aircraft quality aluminum. Kit includes one 35 oz. (60 inches of water) pressure gauge, and one 34 kpa (5 PSI) pressure gauge, both with 1/4" NPT threads. Residential Kit also includes one Mini Ball Valve, one Hand Pump with Check Valve, one Schrader Valve, one 1/4" Male Quick Connect Fitting, one Hose Bib Adapter for Hydrostatic Testing, and one 1/4" x 1/8" Hose Connection. Kit comes in hard plastic case with foam lining to keep everything together and protected for easy grab and go.

Manufacturer: LK Industries Brand: Lufkin Model: 9OCN1293S

Lufkin 50' refill gauge tape.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 177-204

SETTING RING, 4MM

Manufacturer: Ohaus Brand: Ohaus Model: 80780143

The Ohaus metric, stainless steel electronic balance calibration weight meets American Society for Testing and Materials (ASTM) Class 4 specifications, and is designed for use as a reference standard for calibrating other weights, or electronic balances and scales. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. It has a cylindrical shape with a groove for lifting. The weight meets ASTM E617, Class 4 specification for use as a reference standard for calibrating semi-analytic balances, and for student use. An optional National Voluntary Laboratory Accreditation Program (NVLAP) certificate ensures precision and traceability.The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found” mass correction (for recalibration), “As Left” mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Accreditation Cooperation (ILAC), The Asia Pacific Laboratory Accreditation Cooperation (APLAC) and The National Cooperation for Laboratory Accreditation (NACLA). Calibration weights are used to measure the weight or mass of an object ...

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 3900-3049

HHIP parallels are furnished by pair and it is made of high grade tool steel, stabilized and thoroughly hardened to HRC 58. Surface finish to 16 micron inches. High precision - 4 faces accuracy within 00015" per 6 inches. Size is 1 x 2 x 12".

Manufacturer: LK Industries Brand: US Tape Company Model: GTDD33COMP

US tape 33' complete unit gauge tape.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 614330-521

The Mitutoyo grade 00 square gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibr...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 614236-521

The Mitutoyo grade 00 square gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibr...

Manufacturer: Fowler Brand: Fowler

1/4 - 3/4 Universal Transfer Punch Features: Covers a large range with just 1 punch Spring loaded assures perfect hole center alignment Self centering Made of hardened tool steel

Manufacturer: Fluke Corporation Brand: Fluke Model: STL120-III

Set of two (one red, one gray) double insulated silicone shielded test leads for noise free measurements. Specially designed for use with the Fluke ScopeMeter 120 series. Compatible with AC120 alligator clips and HC120 hook clips. Safety designed ground leads included. Integral strain relieve and extra hard probe tips provide extra long service life. Features safety designed shrouded plugs and notched tip to prevent probe from sliding. Bandwidth: 12,5 MHz. Maximum signal voltage: 600V rms, CAT III per IEC 61010-031:2008. Maximum voltage to ground: 600V rms, CAT III per IEC 61010-031:2008. Maximum current: 1A. 2mm Add-on test pin: 600V, CAT II per IEC 61010-031:2008. Length: 1.2m.