|
|
-
4.6 of 5.0 with 48 Reviews
SALE PRICE: $131.07 1% OFF
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4101-0831
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4101-0831
HHIP grade as-2 extra long steel gage block is rectangular shape with two holes. Must have for chc machine set up. Made of the highest quality tool steel. Surface hardness: HRC 64. Complete with Manufacturer's calibration or certificate. Offering n.I.S.T. Traceable calibration conforms to mil Std 45662a, ggg G 15C, ISO/IEC 17025 accredited, ISO 9000, 10012 1, ANSI ncsl Z540 1, ISO guide 25 certified. Tolerance is +50/-30 micro inches. Size is 5".
-
4.6 of 5.0 with 2 Reviews
SALE PRICE: $131.14 65% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614208-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614208-541
|
The Mitutoyo grade AS-1 square gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for gage manufacturing applications. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks ...
-
4.6 of 5.0 with 36 Reviews
SALE PRICE: $134.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611644-516
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611644-516
|
All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.
-
4.6 of 5.0 with 3 Reviews
SALE PRICE: $134.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-FP
Color: White
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-FP
Color: White
|
The Fluke FoodPro infrared thermometer takes noncontact temperature measurement and is used to monitor the surface temperatures of food products and foodservice equipment. This thermometer measures temperature from -30 to +200 degrees C (-20 to +390 degrees F) with an accuracy of + or - 1 degree C (+ or - 2 degrees F) from 0 to 65 degrees C (32 to 150 degrees F) and + or - 1.5% of the reading above 65 degrees C (150 degrees F). It has a 2.5:1 infrared distance-to-spot ratio with LED illumination for highlighting the measurement area. Go/No-Go lights indicate when food is in an unsafe temperature range (40 to 140 degrees F) to meet Hazard Analysis of Critical Control Points (HACCP) guidelines. It is Ingress Protection certified IP54 for dust and splashing liquid and can be hand washed without submersion after use. The CE mark indicates compliance with applicable European Union (EU) directives. It comes with one AA battery and instructions. This thermometer is used by foodservice professionals to measure food product and equipment temperatures and help detect potential food safety problems.SpecificationsTemperature range-30 to +200 degrees C (-20 to +390 degrees F)Infrared sensor accuracy0 to 65 degrees C (32 to 150 degrees F): + or - 1 degree C (+ or - 2 degrees F); above 65 degrees C (150 degrees F): + or - 1.5% of the reading; below 0 degrees C (32 degrees F): + or - 1 degree C (+ or - 2 degrees F) + or - 0.1 degreeDisplay resolution0.2 degree C / 0.4 degree FDistance-to-spot ratio2.5:1Working range25 to 250mm / 1 to 10 inchesPower SupplyAA batteryWeight100gDimensions150 x 30 x50mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focusing the infrared radiation emitted by a surface onto a detecto...
-
4.6 of 5.0 with 6 Reviews
SALE PRICE: $134.99 1% OFF
Manufacturer: PHASE II
Brand: PHASE II
Manufacturer: PHASE II
Brand: PHASE II
Applications Portable hardness test for metals.
-
4.6 of 5.0 with 35 Reviews
SALE PRICE: $136.55 7% OFF
Manufacturer: Tuthill
Brand: Fill-Rite
Model: KIT702VELRUFP
Manufacturer: Tuthill
Brand: Fill-Rite
Model: KIT702VELRUFP
Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker “Made in USAâ€. We use only the most durable materials to insure long life and dependability. Fill-Rite and Sotera branded products deliver superior performance time and time again, regardless of the application or installation.
-
4.6 of 5.0 with 35 Reviews
SALE PRICE: $136.55 7% OFF
Manufacturer: Tuthill
Brand: Fill-Rite
Model: KIT702VELRUFP
Manufacturer: Tuthill
Brand: Fill-Rite
Model: KIT702VELRUFP
Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker “Made in USAâ€. We use only the most durable materials to insure long life and dependability. Fill-Rite and Sotera branded products deliver superior performance time and time again, regardless of the application or installation.
-
4.6 of 5.0 with 43 Reviews
SALE PRICE: $138.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 616199-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 616199-531
|
The Mitutoyo grade 0 square gage block is made of ceramic, has its nominal length engraved in inches, is supplied with a certificate of inspection, meets ASME B89.1.9.2002 standards, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to cal...
-
4.6 of 5.0 with 43 Reviews
SALE PRICE: $138.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 616199-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 616199-531
|
The Mitutoyo grade 0 square gage block is made of ceramic, has its nominal length engraved in inches, is supplied with a certificate of inspection, meets ASME B89.1.9.2002 standards, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to cal...
-
4.6 of 5.0 with 39 Reviews
SALE PRICE: $143.42 12% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 516-834-26
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 516-834-26
|
The Mitutoyo 516-series Grade 0 Ceramic Rectangular Inch Wear Gage Block Set includes a set of rectangular-shaped, white ceramic (CERA) wear gage blocks with nominal length engraved in inches on each, and is supplied with a Mitutoyo inspection certificate that states that the blocks meet American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade 0 standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of each individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.Wear gage blocks are wrung with frequently used gage blocks to prevent wear. Grade 0 gage blocks are commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. Ceramic blocks are harder than steel, and resist corrosion, abrasion, and burrs, withstand high temperatures without melting (high thermal expansion resistance), and provide dimensional stability. Rectangular-shaped blocks provide accurate wringing. The nominal length of each block is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on each block for traceability. The set comes with a fitted wooden case for storage.The set includes a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the blocks meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, sli...
|
|