Calibration - Page 99

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 613146-516

All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.

Manufacturer: Starrett Brand: Starrett Model: G-80607

Even distribution of large quartz crystals provides a smooth finish, which significantly reduces wear on the surface plate and the instruments used on it. Fine micro-finish, combined with the natural voids in the surface, prevents wringing and provides a velvety-smooth tool action. Non-quartz-bearing granite in average daily use requires resurfacing about once a year, while crystal pink plates used in these same plants have required resurfacing only once every three to five years, on average. Great surface hardness and wear resistance the highest percentage of quartz crystals of any granite plate. Quality and economy combined. Comparable to black granite plates while outwearing them as much as 5 to 1. Standard-size plates are mounted on resilient support pads, providing isolation from normal vibration and a non-distorting 3-point suspension. Packed one per crate with skids for forklift handling.

Manufacturer: GASCO Brand: Gasco

Stainless Steel regulator for Reactive Calibration Gas Mixtures, Cylinders: 34LA Aluminum, 58L, 74L, 116L and 103 Steel Cylinders, ecosmart cylinders: 44es,58es,66es, and 116es

Manufacturer: GASCO Brand: Gasco

Stainless Steel regulator for Reactive Calibration Gas Mixtures, Cylinders: 34LA Aluminum, 58L, 74L, 116L and 103 Steel Cylinders, ecosmart cylinders: 44es,58es,66es, and 116es

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS510-V Color: Green

ScopeMeter Compact Probe for electronic applications, green, 10:1, 500 MHz, 300 V CAT III.

Manufacturer: Starrett Brand: Starrett Model: G-81803

Well suited for layout work and supplies an easily portable reference for gaging small parts. Small precision surface plates for many inspection and checking uses throughout the plant.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 619055

Manufacturer: Adam Brand: Adam Model: GKaM-Indicator

The Adam Equipment GK weight indicator works with weighing platform that has up to four load cells to perform weighing; check-weighing; percent-weighing; and parts-counting tasks; as well as dynamic weighing for unstable samples (such as animals or in unstable environments. For applications that are more complex; tare weights; unit weights; and sample sizes can be entered manually using the full numeric keypad. Red; yellow; and green LED lights and an optional audible alarm notify the user during check-weighing mode if the load is over; under; or within the preset weight limit. The indicator calculates weight or piece-count totals to streamline multi-step tasks; while the integrated RS-232 port connects to printer or PC for manual or automatic data recording with text in English; French; German or Spanish. The ABS-housed indicator has an automatic external calibration system and weighs in five different units. Using the included bracket and hardware; it can be mounted to wall or propped on table and then titled to adjust the viewing angle for maximum visibility. The large backlit digital screen clearly displays readings; real time clock (RTC); and capacity tracker for visual reference to prevent the balance from being overloaded. The indicator operates using AC power or the built-in rechargeable battery; offering full mobility in the field and when power supply is hard to find; for up to 70 hours. To conserve battery power; the auto off function can be enabled to activate after periods of inactivity. NTEP Certified.

Manufacturer: Sper Scientific Brand: Sper Scientific Model: 850016

For calibration of all Sper Scientific digital sound meters or any sound level meter with 1” or ½” microphone Conforms to ANSI S1.4-1984 and IEC942 1988 Class 2 standards for acoustical calibrators. Simply place the calibrator on to the digital sound meter’s microphone, turn on the calibrator, and adjust the decibel meter’s reading to either 94 or 114 dB. Operates at a frequency of 1KHz ±4% and with an accuracy of ±0.5 dB. Built in battery check. Easily portable for field use, it comes with a carrying case, adaptors for 1/2” and 1” microphones, instructions and a 9 volt battery. Dimensions: 5” x 1⅞” (127 x 48 mm) Weight: 8.4 oz (238 g).

Manufacturer: Fluke Brand: Fluke Model: 4472387 Color: Yellow

Pin continuity Test: Tests if filaments have continuity. Ballast-type Test: Determine if ballast is electronic or magnetic without taking fixture apart – identify energy wasting ballasts.