Reference Gauges - Page 10

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: EG02-5021

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel no-go (-) plug gage is a class X inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage. All gages measure 2” long, and are within .00002” round (per ASME B89.1.5), with at least a 4-microinch finish for a smooth finish. Tolerance for this class X gage is -.000040” for sizes up to .825” and -.000060” from .8251” to 1.000”. This gage is made of tool steel 60/64 Rc (cold stabilized) for durability. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.

Manufacturer: Precision Brand Brand: Precision Brand

Precision Brand Feeler Gage is used in manufacturing and maintenance operations wherever setting close spacing or checking extremely tight tolerances is required.

Manufacturer: Stahlwille Brand: Stahlwille Model: 11097/26

Precision feeler gauge with tapered blades comes with nickel-plated case

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel no-go (-) plug gage is a class X inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage. All gages measure 2” long, and are within .00002” round (per ASME B89.1.5), with at least a 4-microinch finish for a smooth finish. Tolerance for this class X gage is -.000040” for sizes up to .825” and -.000060” from .8251” to 1.000”. This gage is made of tool steel 60/64 Rc (cold stabilized) for durability. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.

Manufacturer: Forster Products Brand: Forster Products

The MAX gauge is used to measure the absolute maximum allowable, safe chamber headspace. This is the original USGI max spec of 1.6455" and should only be used on GI chambers calling for this spec and only with GI 7.62x51. Not for use on any rifle firing .308 Win. If the bolt closes on the MAX Gauge it is considered unsafe and should be taken out of service for repair. This gauge ships only in the USA, No export or APO/FPO.

Manufacturer: AR Specialties LLC Brand: AR Specialties LLC

The Field gauge is used to measure the absolute maximum allowable, safe chamber headspace. If the bolt closes on the Field Gauge it is considered unsafe and should be taken out of service for repair. This gauge ships only in the USA, No export or APO.

Manufacturer: Fibre-Metal Brand: Howard Leight Model: 280-WFG

Blades pivot for easy measuring of eleven most specific fillet dimensions. Carry in pocket. Etched increments standard and metric equivalents. Fits in 4 1/2 inch x 2 inch case. Measures concave or Convex seams. Stainless steel blades.

Manufacturer: Fibre-Metal Brand: Howard Leight Model: 280-WFG

Blades pivot for easy measuring of eleven most specific fillet dimensions. Carry in pocket. Etched increments standard and metric equivalents. Fits in 4 1/2 inch x 2 inch case. Measures concave or Convex seams. Stainless steel blades.

Manufacturer: Precision Brand Brand: Precision Brand

Precision Brand Feeler Gage is used in manufacturing and maintenance operations wherever setting close spacing or checking extremely tight tolerances is required.