Inside Measurement - Page 51

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-912

The Mitutoyo 368-912 Holtest three-point micrometer set has TiN-coated points, a measurement range of 12-20 mm and is precise to 0.005 mm, with + or - 2 micrometers of accuracy. Titanium nitride (TiN)-coated measuring contact points offer durability and impact resistance, while the contact point geometry allows the instrument to measure to the bottom of a blind hole. The ratchet stop offers constant force for repeatability. Includes inspection certificate ensuring that the exact micrometer purchased has met National Institute of Standards and Technology master standards. This gage set includes two complete display units, setting ring, extension rod, and a fitted plastic case. Bore gages measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gages are typically calibrated with a setting ring. Bore gages come in two types, one simple, and the other direct-measuring. Simple bore gages are used with a caliper to transfer the hole measurement, while the more complex gages take the measurement directly, and display the measurement through a vernier, dial, or digital display. Bore gages have a two- or three-point contact, which indicates how many points on the gage head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point systems are used to measure lobing, or triangular form error. Pistol-grip bore gages are used for fast, single-handed operation with good repeatability from one operator to another. Bore gages, regardless of type, can be used in some special applications, such as measuring threads, spline pitch diameters, and deep bores. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL. What’s in the Box? Mitutoyo 368 series 12-16 mm three-point internal micrometer Mitutoyo 368...

Manufacturer: INSIZE Brand: INSIZE Model: 2426-HOLDER2E

HOLDER for 2426.

Manufacturer: Flexbar Brand: Flexbar

Flexbar True-Bore 3-Point Bore Gaging System. Specifications For Ordering Handles, Gage Heads . True-Bore Is The Result Of Over 25 Years Of Design And Manufacture Of 3-Point Bore Gaging Systems. Ideal For Solving Internal Diameter Measurement Problems On The Shop Floor And Inspection Areas, The System Is Available In A Large Measuring Range For Specific Applications. Mechanical And Electronic Dial Gages As Well As Linear Probes Can Be Used As Specified. Main Features: True-Bore Heads Have A Large Measuring Range And Are Supplied With Fixed Anvils Eliminating Operator Error. 24 Heads Cover .236"-7.87" (6-200mm Range). Unique System Design Allows Two Measuring Handles Or New Pistol Grip Triga-BoreTM To Cover .236"-7.87" (6-200mm Range). Extensions Available For Increased Gaging Depths. Repeatability: .0001"/0,002mm. High Degree Of Accuracy Can Be Achieved Without Need For Special Skills. Customer Can Specify Type Of Output. Ideally Suited To Simple Or Integrated Measurement Applications. Can Be Used For Special Applications Such As Threads 'O' Ring Grooves, Spherical Forms, Etc. Ergonomically Designed Handle Offers Single Handed Operation. Accurate Calibration And Linearity Checks Can Also Be Made Using Flexbar's True-Cal System. Model No. 20325, 3-Point Bore Gage Heads, Head Size 3.543-3.937"

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA 05710065 Veribor Bore Gauge has a range of 50 to 150mm and is accurate to + or - 0.003 mm. It uses a two-point contact to detect form and shape deviations on bores and holes. The low-clearance circular articulation offers high repeatability of measurements. A centering shoe helps to correctly align the gauge into the bore, while tungsten carbide ball measuring tips offer increased wear resistance. The shaft design helps to prevent user hand warmth from affecting the measured result. Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, is headquartered in North Kingstown, RI.What's in the Box?Brown & Sharpe bore gauge with dial 05710065Inspection certificateFitted wooden case

Manufacturer: Flexbar Brand: Flexbar

Flexbar Digital Electronic 3-Point Internal Micrometers. Self-Centering 3-Point Bore Micrometers For The Accurate Measurement Of Internal Diameters. Each 3-Point Bore Micrometer Comes In Its Own Fitted Hard Case Complete With Setting Ring And Depth Extension. Ring Gage Certificate To Nist Available Upon Request. Self-Aligning And Self-Centering Carbide Tipped Measuring Contact Points Suitable For Blind Bore Measurements Ratchet Stop Provides Uniform Measuring. Setting Ring Accuracy: .000020"Resolution: .00005"/0.0001mm (Inch/Metric Conversion). Thimble Graduation: 0.0001". Easy To Read Electronic Digital Display With The Following Measurement Functions: Absolute And Incremental Measurement Tolerance Settings Preset ( + And - ) Hold Key SPC Data Output Capability (RS232C) Model No. 20856, Digital 3-Point Bore Micrometer, Measuring Range: 1.000-1.200"

Manufacturer: Flexbar Brand: Flexbar

Flexbar Digital Electronic 3-Point Internal Micrometers. Self-Centering 3-Point Bore Micrometers For The Accurate Measurement Of Internal Diameters. Each 3-Point Bore Micrometer Comes In Its Own Fitted Hard Case Complete With Setting Ring And Depth Extension. Ring Gage Certificate To Nist Available Upon Request. Self-Aligning And Self-Centering Carbide Tipped Measuring Contact Points Suitable For Blind Bore Measurements Ratchet Stop Provides Uniform Measuring. Setting Ring Accuracy: .000020"Resolution: .00005"/0.0001mm (Inch/Metric Conversion). Thimble Graduation: 0.0001". Easy To Read Electronic Digital Display With The Following Measurement Functions: Absolute And Incremental Measurement Tolerance Settings Preset ( + And - ) Hold Key SPC Data Output Capability (RS232C) Model No. 20857, Digital 3-Point Bore Micrometer, Measuring Range: 1.200-1.600"

Manufacturer: GOODSON Brand: Goodson

90ø Bore Gauge 2-6"

Manufacturer: Starrett Brand: Starrett Model: 701B

The Starrett 701 series internal groove vernier inside micrometer has caliper-type jaws with flush-ended contacts for measurement of grooves inside rings, bores, and tubes, and a vernier scale in inch units for taking precise inside dimension (ID) measurements. The micrometer is made of high-grade tool steel, with hardened and ground flush-ended gauging contacts that help gauge grooves at the bottom of blind holes. A knurled friction thimble helps provide quick adjustment capability. The vernier scale is graduated to 0.001” and a locking clamp helps hold measurements in place. The micrometer has a satin chrome rust- and glare-resistant finish.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-441

The Mitutoyo 511-441 Dial Bore Gauge for Blind Holes has a measurement range of 0.6 to 1.4" and is accurate to + or - 0.0002". It is precise to 0.0001" and can measure internal diameters at positions close to the bottom of blind holes. This direct-measuring gauge uses a two-point contact system to detect geometry problems such as ovality and taper, and carbide-tipped contact points provide extended wear and improved abrasion resistance. A rugged cover protects the dial indicator.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-268

The Mitutoyo 368 series Holtest vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in inch units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0001” or 0.0002” depending on the model. The measuring faces are carbide-tipped or TiN-coated for wear resistance depending on the model. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.