Inside Measurement - Page 7

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-752

The Mitutoyo 511-752 bore gauge is for performing close tolerance inside diameter measurements. The gauge (511-732) has a measurement range of 1.4 to 2.5", graduations of 0.0001", and an accuracy of + or - 0.0002". The dial indicator (2923SB-10) interface provides precise and easily readable measurements in inches. The contact points of this gauge are carbide-tipped for durability. This unit has a large, hollow-structured grip to reduce heat from the operator for accurate measurements. It comes with six anvils and four spacers for taking measurements, and a cover to protect the dial. The dial is balanced and has a reading of 0-5-0. The gauge has a measuring force of 4.0 Newtons (N) or less and a guide force of 6.0N or less.SpecificationsRange1.4 to 2.5"Graduations0.0001"Accuracy+ or - 0.0002"Range per revolution0.01"FaceDial, white face, shockproof, jeweled bearingDial reading0-5-0Measuring force4.0N or lessGuide force6.0N or lessStroke of contact point0.047"Probing depth6"Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA measuring head for Intrimik micrometers is an accessory for use with the Brown & Sharpe Intermik LCD capa micrometer. It has three-point contacts for self-centering measurement of the inside dimension (ID) of bores. The measuring head is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The measuring faces are made of hardened steel and may be uncoated, TiN-coated, or tungsten carbide-tipped for wear resistance, depending on the model.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Starrett Brand: Starrett Model: 823BZ

Highly useful for internal linear measurements such as measuring cylinders, rings, setting calipers and parallel surfaces.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA measuring head for Intrimik micrometers is an accessory for use with the Brown & Sharpe Intermik LCD capa micrometer. It has three-point contacts for self-centering measurement of the inside dimension (ID) of bores. The measuring head is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The measuring faces are made of hardened steel and may be uncoated, TiN-coated, or tungsten carbide-tipped for wear resistance, depending on the model.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 141-117

The Mitutoyo 141 series vernier inside micrometer includes a set of interchangeable rods for a diversified range of measurement, and has a vernier scale in metric units for making precise measurements. The micrometer and rods have a satin chrome rust- and glare-resistant finish. The measuring faces are hardened steel for durability. The vernier scale is graduated to 0.01mm. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 137-212

The Mitutoyo 137 series tubular vernier inside micrometer includes a set of extension rods with anvils for a diversified range of measurement measuring inside dimensions (ID) of cylinders, rings, and parallel surfaces. It has a vernier scale in inch units for taking precise ID measurements to 0.001”, and a satin chrome rust- and glare-resistant finish. The micrometer head has a travel of 0.5” per revolution that helps provide fine positioning. The solid extension rods help provide durability. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA measuring head for Intrimik micrometers is an accessory for use with the Brown & Sharpe Intermik LCD capa micrometer. It has three-point contacts for self-centering measurement of the inside dimension (ID) of bores. The measuring head is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The measuring faces are made of hardened steel and may be uncoated, TiN-coated, or tungsten carbide-tipped for wear resistance, depending on the model.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 126-137

Mitutoyo Screw Thread Micrometer, Range: 0 - 1", Graduations: .001", Thimble: Ratchet, Standard: No, Comment: Order anvils separately.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA measuring head for Intrimik micrometers is an accessory for use with the Brown & Sharpe Intermik LCD capa micrometer. It has three-point contacts for self-centering measurement of the inside dimension (ID) of bores. The measuring head is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The measuring faces are made of hardened steel and may be uncoated, TiN-coated, or tungsten carbide-tipped for wear resistance, depending on the model.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Hexagon Metrology Brand: Standard Gage

The Standard Gage three-point vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores and a vernier scale in inch units for making precise measurements. The micrometer includes an extension rod for access to deep bores, and a setting ring. The micrometer and accessories have a satin chrome rust- and glare-resistant finish. The contact faces are carbide-tipped for wear resistance. The vernier scale is graduated to 0.0001” or 0.0002” depending on the model. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Standard Gage manufactures precision measuring equipment and metrology hand tools, and is a product line by Hexagon Metrology. Standard Gage is headquartered in North Kingstown, RI.