Micrometers

Manufacturer: EISCO Brand: EISCO

EISCO Micrometer Screw Gauge, Nickel Plated Brass - Range 0-25x0.01mm(1) MicrometerMade of nickel plated brass, with ratchet top, accurately machined stainless steel rod. Range 0-25 x 0.01 mm, supplied in case. Accuracy is perfect for a hobbyist or student -- at 10mm, accuracy is +/- .003mm.

Manufacturer: Starrett Brand: Starrett Model: 921

STARRETT Outside Micrometer C

Manufacturer: Starrett Brand: Starrett Model: 913

913 Case F/2" Micrometer

Manufacturer: Grizzly Brand: Grizzly Model: G5727

Ease micrometer use and increase precision with this Micrometer Stand. Cast iron stand features convenient adjustments for optimum reading and part orientation. Fits most inside and outside micrometers.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-227-001-1

Fowler 52-227-001-1 full warranty Inch Individual Micrometer Standard. Maximum measurement is 1". Measuring faces: .315" diameter up to 11", .430" sizes 12" and up. The measuring faces are hardened and precision ground with microlap finish. Fowler 52-227-001-1 standard comes with heat insulated cover. It meets or exceeds Federal accuracy specs. This product has a 1 year warranty offered by Fowler Precision. If you experience any problem contact Fowler directly for warranty claims. Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages and digital scales. The company founded in 1946, is headquartered in Newton, MA.

Manufacturer: Starrett Brand: Starrett Model: 912

The Starrett 912 storage case fits Starrett Series 2, 2A, 2M, and 2MA outside micrometers with a 2"/50mm range (sold separately). The padded exterior helps absorb impacts and the molded interior compartment protects the micrometer from damage when stored or transported. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.

Manufacturer: Starrett Brand: Starrett Model: 216ZZ-2

Starrett Micrometer Part # 56171 216ZX-2 This is the Starrett mechanical digital micrometer very simple to use even by the inexperienced. The anvil and spindle are sized at .250" (6.35mm). Headquartered in Athol, MA, in the heart of New England, where manufacturing began and evolved into what it is today, Starrett has a history and reputation so rich and solid that the words quality and Starrett are virtually synonymous. The broad Starrett product line includes precision tools micrometers, calipers, rules, tape measures, levels, electronic gages, dial indicators, gage blocks, granite surface plates, optical measuring projectors, vision systems, vises, M1 lubricant, and precision ground flat stock. Much of the Companys production is concentrated in hand measuring tools and precision instruments that many manufacturing companies, from small machine shops to Fortune 500 firms, buy for the use of their employees.

Manufacturer: ABS Import Tools Brand: HHIP

Make using your micrometer easier when measuring small parts and increase precision with this Micrometer Stand. Cast iron stand features convenient adjustments for optimum reading and part orientation. Fits most inside and outside micrometers.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 959143

The Mitutoyo 959143 data hold unit is used to hold the instrument reading, even after the jaws of the instrument are opened. It is designed for use with Mitutoyo Absolute series tools that have SPC capabilities including the absolute solar caliper, absolute digimatic caliper, absolute vernier caliper, absolute back-jaw centerline caliper, absolute snap caliper, absolute low-force caliper, absolute digimatic depth caliper, absolute digimatic depth gage, absolute tire thread depth gage, absolute digimatic scale units, and absolute tire, wheel, and brake calipers.Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display at any point along the slide, with an LCD that displays a single value in English and/or metric units.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: HFS Brand: HFS

Micrometer Tolerance Measure Range Accuracy 0-1" +/- .00015"/ .004 mm 1-2" +/- .00015"/ .004 mm 2-3" +/- .00019"/ .005 mm 3-4" +/- .00019"/ .005 mm 4-5" +/- .00023"/ .006 mm 5-6" +/- .00023"/ .006 mm Standard Tolerance Standard Size Tolerance 1" +/- .00008" 2" +/- .00008" 3" +/- .00008" 4" +/- .00012" 5" +/- .00016"