Micrometers - Page 191

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-252-211-0

The Fowler 52-252-211 multi-anvil EZ-Read outside micrometer has a digit display with a 0.0001" resolution, a 0 to 1" measuring range, and an interchangeable anvil for measuring tube thickness, shoulder edge distances, rivet heads, and other hard-to-measure workpieces. The flat spindle has a carbide-tipped measuring face for wear resistance and the interchangeable flat and rod-style anvils provide a variety of measuring options. The flat anvil has a thickness of 0.058" and a 1" length. The rod-style anvil has a 0.120" diameter and a 1" length. The locking lever on the spindle locks measurements in place for accurate readings. A friction thimble applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The micrometer includes a flat anvil and rod-style anvil. SpecificationsDisplay type Digit Anvil style Interchangeable flat and round Spindle style Flat Measuring range 0 to 1" Graduation interval 0.0001" Accuracy 0.0002" Thimble style Friction Flat anvil dimensions 0.058" thickness; 1" length Round anvil dimensions 0.120" diameter, 1" lengthMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic i...

Manufacturer: Starrett Brand: Starrett Model: T444.1XRL-6

T444.1XRL-6 Outside Micrometer .0001" Grad, 0-6" Range, Ratchet Stop, Lock Nut, Carbide Faces. The Starrett T444 Series have heat-insulators on the frame to help reduce temperature-related expansion or contraction. The Vernier scale on the thimble and sleeve is graduated to 0.001", with a satin chrome rust and glare-resistant finish on the thimble. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-866-001-0

The Fowler 54-866-001 Quadramic digital outside micrometer has two LCDs for four-way viewing, a 0 to 1"/0 to 25mm measuring range, and a flat anvil/spindle pair for general purpose measuring. Two LCDs can be viewed from upright or inverted from the front or back. A switchable resolution of 0.00005" and 0.001mm provides precise readings. Carbide measuring faces provide durability and wear resistance. A friction thimble provides smooth and quiet operations, and is suitable for one-handed operation. Friction-style thimbles stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The housing is Ingress Protection (IP) certified IP54 for protection against dust and water. The LCD has a hold feature that saves the reading for recording. Absolute measurements provide the total dimension of the workpiece. An automatic shut-off feature extends battery life. RS-232 output transfers data to a computer (cable not included). The micrometer requires a CR2032 battery (included), and includes a wrench and a fitted case. SpecificationsDisplay typeLCDAnvil/spindle styleFlatMeasuring range0 to 1"/0 to 25mmResolution0.00005"/0.001mmThimble styleFrictionData outputRS-232SpecificationsIP54PowerCR2032Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The Fred V. Fowler Company manufactures inspection and measurement instruments...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-860-211-0

The Fowler 54-860 series digital outside micrometer has a ball anvil/spindle pair, a choice of measuring range, and an LCD with an inch/metric switchable resolution for measuring the inside and outside diameters of sleeves, collars, tubing, and other curved and cylindrical surfaces. The ball anvil and spindle contact the curve at a single point, providing accurate measurements. Carbide measuring faces provide wear resistance. A switchable resolution of 0.00005" and 0.001mm, and an accuracy of 0.00016"/0.004mm on 1 to 2" micrometers provide precise readings and accurate measurements. A friction thimble provides smooth and quiet operations, and is suitable for one-handed operation. Friction-style thimbles stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The insulated steel housing provides durability and is Ingress Protection (IP) certified IP54 for protection against dust and water. The LCD has a hold feature that saves the reading for recording. The micrometer can be set to take absolute or incremental measurements. Absolute measurements provide the total dimension of the workpiece. Incremental measurements provide a reading that shows the difference between a set standard and workpiece being measured. This type of reading is often used to determine if a workpiece falls within tolerance levels. RS-232 output transfers data to a computer (cable not included). The micrometer requires a Type 357 battery (included), and includes a fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay typeLCDAnvil/spindle styleBall anvil/spindle pairMeasuring rangeVariesResolution0.00005"/0.001mmThimble styleFrictionAnvil/spindle diameter0.250"/6.35mmData outputRS-232SpecificationsIP54PowerType 357 batteryMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a ...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-860-276-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 122-125

Mitutoyo Blade Micrometer, Range: 0 - 1", Graduations: .0001", Thimble: Ratchet, Standard: No

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 141-122

The Mitutoyo 141 series vernier inside micrometer includes a set of interchangeable rods for a diversified range of measurement, and has a vernier scale in inch units for making precise inside dimension (ID) measurements. The micrometer and rods have a satin chrome rust- and glare-resistant finish. The measuring faces are hardened steel for durability. The vernier scale is graduated to 0.001”. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 164-164

2 In/50.8mm, .0005 In/0.01mm, Digimatic Micrometer Head, With SPC Data Output, 330 Degree Rotating Face.