Indicators - Page 101

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 312b-20 Color: White

The Brown & Sharpe TESA Interapid 312 series dial test indicator has a white face, a 0.157" stem diameter, and inch measurements. The white dial and contrasting black hand help make measurements easy to read, and the dial face rotates to allow horizontal and vertical measurements. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation and a revolution counter prevent plus or minus confusion. The ball-bearing lever system swivels through to 210 degrees. The dial face is mounted parallel to the insert's axis for mounting horizontally or vertically from the front, top, or back of the indicator. Dovetail mounts on the front and back provide a rigid setup, and a 4mm swiveling shank on the top of the indicator can be mounted at a range of angles. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a declaration of conformity. The set includes an Interapid 312 dial test indicator, a 0.080" (2mm) ball-end carbide contact point, a point key, a Certificate of Accuracy and Traceability, and a storage box. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measu...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-792B

.5 In/12.7mm, .00005 In/0.001mm, ID-S ABSOLUTE Digimatic Indicator, 3/8 In stem, Flat Back, With SPC Data Output, ANSI.

Manufacturer: Starrett Brand: Starrett Model: 2900-1M

Starrett 2900 Electronic Indicators have Innovative True Absolute Sensor Technology to minimize the chance of data loss for exceptional reliability. Built with IP67 protection and customary Starrett quality, they maintain their reliability in hostile shop environments.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: White

The Brown & Sharpe Bestest-3 series dial test indicator set has a white face and inch measurements. The indicator can make either horizontal or vertical measurements, and the choice of white or yellow face dial face rotates. The white dial and a contrasting black hand help make measurements easy to read. The yellow face with contrasting black hand complies with ANSI standards for metric dial faces. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a Certificate of Accuracy and Traceability. The set includes a dial test indicator, a 0.080" (2mm) carbide contact point, a rectangular bar, a swivel clamp, a point wrench, a Certificate of Accuracy and Traceability, and a storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range th...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-793BCAL

The calibrated Mitutoyo 543-793BCAL Absolute Digimatic digital indicator gauge, ID-S series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.0001" (0.001mm), and an accuracy of + or – 0.00012". The LCD displays in both inches and metric units. This model has a flat back for stem mounting or plate mounting on the rear of the indicator. An Absolute electrostatic capacitance linear encoder helps prevent overspeed errors for taking accurate measurements. This model is Ingress Protection certified IP42 for protection against objects greater than 1mm and dripping water. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. Additional functions for this indicator include origin set, zero set, counting direction switching, and alerts for low voltage, counting value composition error, and overflow error. The measuring force is 2.0 Newtons (N) or less. It has a battery life of approximately 20,000 hours of normal use. This unit comes with an SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.5" (0 to 12.7mm)Resolution0.0001" (0.001mm)Accuracy+ or – 0.00012"Measuring force2.0N or lessStem4-48UNF contact point thread mount with 3/8" diameter spindleFaceLCD displays in both inches and metric units, with flat backData ...

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 1950C-1-0

Offers all the features of a full size panel meter in a compact digital display for pressure, flow, level, force, and temperature measurement. 5 digit, 0.46" LCD display with a span range of -9999 to 99999. Simple programming through front panel. Compact, lightweight, impact-resistant NEMA 4X, IP65 housing with sealed front bezel. CE compliant to suppress RFI, EMI and ESD. Current Input signals. 9 to 28VDC, unregulated. Terminal block in rear Recommended wire: 30-14 AWG copper Connections. Nonvolatile E2PROM memory retains all programming parameters and max/min values when power is removed Memory. 0.1 percent of span accuracy. Less than 500 msec Response time. -35 to 75 degree C Operating and 35 to 85 degree C Storage temperature. 0 to 85 percent maximum relative, non-condensing operating and storage humidity. According to IEC 68-2-6 Vibration. Operational 30 g, 11 msec in 3 directions Shock. Emissions and immunity to EN 61326 Electromagnetic rating.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-796CAL

The calibrated Mitutoyo 543-796CAL Absolute Digimatic digital indicator gauge, ID-S series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.00005" (0.001mm), and an accuracy of + or – 0.00012". The LCD displays in both inches and metric units. This model has a lug back for mounting from the rear of the indicator. An Absolute electrostatic capacitance linear encoder helps prevent overspeed errors for taking accurate measurements. This model is Ingress Protection certified IP53 for protection against dust and spraying water. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. Additional functions for this indicator include origin set, zero set, counting direction switching, and alerts for low voltage, counting value composition error, and overflow error. The measuring force is 2.5 Newtons (N) or less. It has a battery life of approximately 20,000 hours of normal use. This unit comes with an SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.5" (0 to 12.7mm)Resolution0.00005" (0.001mm)Accuracy+ or – 0.00012"Measuring force2.5N or lessStem4-48UNF contact point thread mount with 3/8" diameter spindleFaceLCD displays in both inches and metric units, with lug backData outputYesDimensions103.9 x 59 x 27.5mm (H ...

Manufacturer: Motionics Brand: Motionics Model: BDLT-102

BlueDial-LT is the lite version of original BlueDial. It comes with a dial indicator of high resolution and high accuracy. The integrated Bluetooth Low Energy transmitter continuously streams measurement readings at the rate of 8 samples per second. Users can directly view and record measurement readings on their smart device screens at a distance of up to 10 meters. With a more affordable price, users can still expect high accuracy displacement measurement and the convenience of wireless data transmission. This item is built and shipped from TX, USA

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 1900C-1

NOSHOK Series 1900 compact digital indicator provide digital display of any desired unit of pressure, temperature, level, force or flow measurement. Their 3-1/2" digit display has a span range of 0 to 1999 and is available in a positive image reflective LCD or in an optional back-lit version. They are housed in a compact, lightweight, impact resistant plastic case with a clear viewing lens. The sealed front panel installation also meets NEMA 4x/IP65 specifications for wash down and dusty environments, when properly installed. 4mA to 20mA or 10mA to 50mA Input signal. 160 ohms max at 20mA; 60 ohms max at 50mA Input impedance. 100mA Maximum input current. 0 to 1999 Span range, -1999 to 1999 Offset range. +/-0.1 percent to 1 digit. 2.5 Readings per second, nominal Reading rate. 1.5 seconds to settle for a step change Response time. -40 to 175 degree F Storage temperature. 32 to 140 degree F Operating temperature. CE compliant to EMC norm EN 61326:1997/A1:1998 RFI, EMI and ESD protection. Fits DIN standard cut-out 2.68" x 1.30". Compact, lightweight, impact-resistant NEMA 4X, IP65 housing with sealed front bezel.

Manufacturer: CAS Corporation Brand: CAS Model: CI-200SC

The CI-200 Series, a family of digital indicators providing full featured versatility and dependability at an economical price. A wide array of standard features include either 304 stainless steel IP67 rated or hardened plastic NEMA 12 enclosures, AC or DC operation, choice of dry cell or rechargeable battery, full function numeric keypad, ID capabilities, and much more.