|
|
-
1.0 of 5.0 with 1 Reviews
SALE PRICE: $27.16 3% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
The Brown & Sharpe 599-773 Plunger Release Magnet is used to locate screws or pins in recesses, and is capable of removing chips and ferrous dust from holes and slots as small as 1/4". It features a plunger released magnet for disengaging and a red, anodized aluminum body with a pocket clip. Magnetic bases are used to hold indicators at points along an item for high accuracy measurements. They are typically used by machinists, calibration labs, and in general setup situations. Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001 and is headquartered in North Kingstown, RI.
-
1.0 of 5.0 with 1 Reviews
SALE PRICE: $28.00 1% OFF
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Standard indicator Stands. Quality Made Large Size Stands Mounted on Your Choice of: C-Clamp, Disc Magnet, or On/off Mag Base. Available With or Without Fine Adjustor Rod. Stand Specifications: Lug Back Holder. Accepts All AGD Dial indicators, Stems, etc. Accepts Dial-Test indicators 3/8" and 5/32" Dia. Rugged Locking Knobs - Scriber included. Adjusts in both Horizontal and Vertical planes. Main Post: .470 Dia. x 7" Long. Secondary Post: .385 Dia. x 6" Long. Model No. 18022, indicator Stand on Disc Magnet With Fine adjustor. Low Profile, 100 lb. pull Magnet: 3 1/4" Dia. x .435" High.
-
1.0 of 5.0 with 1 Reviews
SALE PRICE: $29.00 1% OFF
Manufacturer: Drillpro
Brand: DRILLPRO
Model: DRILLPROTSZYmall1607
Manufacturer: Drillpro
Brand: DRILLPRO
Model: DRILLPROTSZYmall1607
|
This is a nice indicator tool for you !~ Magnetic stand that uses a switchable permanent magnet for convenient mounting onto flat iron or steel surfaces. The arm can be hydraulically locked in any position using the knob on the upright . Useful for holding dial indicators or dial test indicators during alignment operations. Features : Permanent magnet operation with ON/OFF control. V-grooved base for secure mounting on cylindrical surfaces. Ideal for holding lever indicators at any orientation on a machine tool for alignment operations. Flexible, strong, and precise rotary joints,can adjust any direction and location. Powerful magnetic base, with on/off switch for magnet. With high stability, it will be your ideal tool in the measurement of precision workpiece field. Specifications : Base Size(L x W x H) : Approx. 40 x 29 x 35mm Total Height : Approx. 19.4cm Clamping Hole Diameter : Approx. 8mm Material : Metal Package included : 1 x Universal Magnetic Base Stand ( The indicator is not included )
-
1.0 of 5.0 with 1 Reviews
SALE PRICE: $39.45 1% OFF
Manufacturer: Grizzly
Brand: Grizzly
Model: G9610
Manufacturer: Grizzly
Brand: Grizzly
Model: G9610
These Test Indicators have an easy-to-read dial and a pivoting stylus that moves at right angles to the dial face.
-
1.0 of 5.0 with 1 Reviews
SALE PRICE: $42.61 12% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 676-2
Manufacturer: Starrett
Brand: Starrett
Model: 676-2
These magnetic backs provide a quick and easy means of attaching any Starrett AGD indicator to flat, ferrous metal surfaces. A real timesaver for machine, jig and fixture set up. Requires no clamps, rods or snugs. A special 5/16"-24 threaded stud back is provided to replace the standard lug back. The powerful, permanent magnet is then attached to the threaded stud. Anti-magnetic indicators are not required.
-
1.0 of 5.0 with 1 Reviews
SALE PRICE: $43.00 1% OFF
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
The Original Made in U.S.A. Flexbar. Instant Positioning - instant Locking Universal Holder/Positioners for All AGD indicators and Electronic Sensors (Lug Backs Too!) The Heavy Duty Flexbar is completely Flexible; lets you reach over, under, around, instantly and surely. Elimination of the Large assortment of rods, Swivels, Clamps and other Hardware necessary to reach and Measure in obstructed areas. Cuts Set-up time as much as 75% to 90%. Flexbar Sets and locks With a simple twist of the Lever. Top Mounting Clamp ("B"): (Telescopic Action) Grips objects from .125" up to .510" Diameter. Cable and swaged fittings are stainless aircraft and Mil Spec Grade. Locked by Tensioning of Cable, incredible rigidity is achieved by this design. (No Movement once locked). Cam Action Locking. Model No. 18030, Flexbar 13" Height, With 5/16 Thread. Magnet Not included.
-
1.0 of 5.0 with 1 Reviews
SALE PRICE: $47.95 57% OFF
Manufacturer: Anytime Tools
Brand: Anytime Tools
Manufacturer: Anytime Tools
Brand: Anytime Tools
Attaches To Any Convenient Object Wear and runout gauge set comes in a convenient molded case. Checks tire and wheel runout, gear backlash, valve guide wear, etc. 12" flex arm can be set to almost any measuring position desired. Indicator features 0-1" travel, and .001" graduations. This tool is useful where you can not use magnetic base. Will attach to any object. Features: Lockable Flexible Shaft1"/0.0005" Dial Indicator IncludedClamp Pliers with attachmentMolded storage case
-
1.0 of 5.0 with 1 Reviews
SALE PRICE: $55.55 1% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-520-950-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-520-950-0
|
The Fowler 52-520-950 dial indicator with hydraulic-arm magnetic base has an American Gage Design (AGD) Group 2, 2-1/4" dial face with a continuous dial, a 0.40" measuring range, 0.001" graduations, a revolution counter, and tolerance markers, and is designed to measure surface variations in fractions of an inch. The indicator is dust-proof, water-proof, oil-proof, coolant-proof, and shock-proof. The 0-100 continuous dial with revolution counter has a total measuring range of 0.40" and 0.001" graduations, with each revolution equal to 0.1". An adjustable bezel and dial sets the zeros the reading at any location. Tolerance markers allow operators to observe limits at a glance. The magnetic base has a 75-lb. pull and a hydraulic arm that eliminates vibration and movement during use, and can be micro-adjusted on two ball sockets. An on/off lever releases the magnet.The set includes a dial indicator and magnetic base. Dial readings with three digits, 0-10-0 for example, signify that the indicator has a balanced dial. Dial readings with two digits, 0-100 for example, indicate the dial has a continuous dial. Balanced dials are used for reading the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. SpecificationsDial face type and diameter AGD Group 2, 2-1/4" diameter face Dial type and reading Continuous 0-100 Range and graduations 0-0.40" Graduations 0.001" Revolutions Up to 4 revolutions, each revolution equal to 0.10" Contact point construction Carbide contact point with 0.080" diameter Magnetic base pull 75lb. Base dimensions 2 x 2-11/32 x 1-13/16 inches (H x W x D) Specifications AGD Group 2H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small...
-
1.0 of 5.0 with 1 Reviews
SALE PRICE: $64.01 1% OFF
Manufacturer: Grizzly
Brand: Grizzly
Model: G9611
Manufacturer: Grizzly
Brand: Grizzly
Model: G9611
These Test indicators have an easy-to-read dial and a pivoting stylus that moves at right angles to the dial face.
-
1.0 of 5.0 with 1 Reviews
SALE PRICE: $67.65
Manufacturer: Hexagon
Brand: Standard Gage
Model: 01664003
Manufacturer: Hexagon
Brand: Standard Gage
Model: 01664003
The Standard Gage 01664003 Magnetic Stand has a flexible arm with a fixing bore diameter of 8 to 9.6 mm for holding dial gauges and comparators, and a magnetic base that adheres to metal surfaces with approximately 450 N of holding force and has a V-groove for mounting to cylindrical surfaces. The flexible arm allows for precise positioning of gauges and comparators, and has a dovetail clamp. A switch allows the magnetic force to be turned on and off to aid positioning. The maximum extended length of the arm and post is 280 mm. The stand weighs 1.5 kg. Standard Gage manufactures precision measuring equipment and metrology hand tools. The company is headquartered in North Kingstown, RI.
|
|