|
|
-
5.0 of 5.0 with 6 Reviews
SALE PRICE: $148.97 25% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 1109S-10
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 1109S-10
Color: White
Unlike many other dial indicators, the one revolution dial indicator literally shows the entire spindle travel or range as one sweep of the hand, eliminating the possibility of reading errors due to miscounting the multiple revolutions. With one-revolution dial indicators, "within tolerance" and "out-of tolerance" can never misinterpreted An unique shock-proof mechanism is incorporated, providing improved immunity to shock due to sudden spindle retraction caused by high impact.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $148.99 4% OFF
Manufacturer: Central Tools
Brand: Central Tools
Model: 6400
Manufacturer: Central Tools
Brand: Central Tools
Model: 6400
Designed for making comparative tests where precision counts. All sets are complete with: Jeweled bearing indicator with 1-1/2" diameter bezel and rear mounted plunger; Two extra contacts (3/16" diameter and 5/16" diameter); Indicator holding rod (two sections); Hole attachment for checking bores (.125" range); Indicator C-clamp mounting; Universal rod connector and tool post holder.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $149.00 16% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-783B
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-783B
|
The Mitutoyo 543-783B Absolute Digimatic electronic indicator gauge, ID-S series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.0005" (0.01mm), and an accuracy of + or - 0.0008". The LCD displays in both inches and metric units. This model has a flat back for stem mounting or plate mounting on the rear of the indicator. An Absolute electrostatic capacitance linear encoder helps prevent overspeed errors for taking accurate measurements. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. This model is Ingress Protection certified IP42 for protection against objects greater than 1mm and dripping water.Additional functions for this indicator include origin set, zero set, counting direction switching, and alerts for low voltage, counting value composition error, and overflow error. The measuring force is 2.0 Newtons (N) or less. It has a battery life of approximately 20,000 hours of normal use. This unit comes with an SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.5" (0 to 12.7mm)Resolution0.0005" (0.01mm)Accuracy+ or - 0.0008"Measuring force2.0N or lessStem4-48UNF contact point thread mount with 3/8" diameter spindleFaceLCD displays in both inches and metric units, with flat backData outputYesDimensions103.9 x 59 x 27.5mm (H x W x D)Shipping weight0.5lb.StandardsIP42Power sourceSR-44 battery (included)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $151.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 3808MA
Color: Yellow
Manufacturer: Starrett
Brand: Starrett
Model: 3808MA
Color: Yellow
The Starrett 3808 precise, high quality test indicator offers a full complement of standard features. Indicator includes two dovetail clamps and case.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $155.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 3909MAC
Color: Yellow
Manufacturer: Starrett
Brand: Starrett
Model: 3909MAC
Color: Yellow
The Starrett 3909 precise, high quality test indicator offers a full complement of standard features. Indicator includes two contact points, two dovetail clamps, swivel post holder, tool post holder, contact wrench and case.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $158.00 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: Yellow
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: Yellow
|
The Brown & Sharpe TESA Tesatast series dial test indicator has a yellow face, a 2mm stem diameter, and metric measurements. The indicator can make either horizontal or vertical measurements, and the choice of white or yellow dial help make measurements easy to read. The yellow face with contrasting black hand complies with ANSI standards for metric dial faces. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays units in fractional millimeters (mm). The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes an identification number and a declaration of conformity. The set includes a dial test indicator, a 0.080" (2mm) ball-end carbide contact point, a 0.310"(8mm) extension with dovetail, a point key, a Certificate of Accuracy and Traceability, and a storage box. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than ba...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $159.53 1% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-580-016-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-580-016-0
The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $160.00 20% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-403T
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-403T
Mitutoyo Horizontal Test Indicator Set, Graduations: .0001", Range: .008", Dial Face: 0-4-0, Includes: Test indicator, .039", .079" and .118' carbide contact points, 5/32" and 3/8" stems, clamp nut, swivel clamp, holding bar.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $160.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2803SB-10
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2803SB-10
Color: White
|
The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $160.55 5% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-452
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-452
Mitutoyo Vertical Test Indicator, Graduations: .0005", Range: .030", Dial Face: 0-15-0, Includes: Test indicator, .079" carbide contact point, 3/8" stem, clamp nut.
|
|