Indicators - Page 51

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4400-0020

HHIP precision centering indicator features quick, accurate, easy centering in boring and milling set-up on horizontal or vertical machines. Operates at an angle from horizontal to vertical machines, and from internal to external diameter without any change by simply changing the feeler. Face of the indicator remains stationary at any desired position while the machine spindle rotates, leaving the operator with both hands free to accurately position the table. Includes: restraining rod, center point feeler, 2 inch straight feeler, 4 inch straight feeler, 6 inch straight feeler, 2 inch curved feeler, 4 inch curved feeler, 6 inch curved feeler product specifications: body Length: 5-1/2"; shank: 3/8 inch diameter x 7/8 inch long; weight: 9-1/2 oz; feeler ball: 1/8 inch diameter; measuring range: 250 Axis offset; capacity: internal 5/32 inch to 4-1/4"; dia. External 0 to 4-1/4 inch dia. Speed: spindle rotation up to; 800Rpm (exceeding this speed is not recommended) locating accuracy: 0.0002 inch of true center.

Manufacturer: Westward Brand: Westward

Magnetic V-Base, Magnetic Pull 85 Lb, Base Size 2 X 2 11/32 X 1 13/16 In, Fine Adjustment, Rod Dia 0.39 In, Upright Post Dia 0.477 In, Uprights 1, Thread Size M8, Switch Type Lever, Overall Length 9.5 In, Gage Rod 6 In, For Use With Test Indicator, Construction Steel, Contains Plastic, Agency Compliance AGD, Includes Main Post, 1 Rod, On/Off Switch

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: P900-S104

Manufacturer: Brown & Sharpe Brand: Brown & Sharpe

Manufacturer: O.E.M. Brand: Unknown Model: ASC557212ACW01

DAVIS TURBO METER ELECTRONIC WIND SPEED INDICATOR 0-99 MPH Turbo Meterâ„¢The Turbo Meter provides uncommon accuracy, sensitivity, and pocket-sized convenience. It is based on the principle that a freely turning turbine will rotate at a speed directly proportional to the wind speed. To insure maximum sensitivity and accuracy, the turbine is suspended on sapphire jewel bearings, and its rotation is sensed by an infrared light beam which adds no friction. The resulting signal is processed electronically by an LSI (Large Scale Integrated) circuit for improved reliability and reduced size. A special three digit display is used for extra resolution and provides excellent viewing contrast in bright sunlight. A handy switch selects between four different scales knots, feet per minute, meters per second, and miles per hour for unmatched versatility. Unit is compact size (2.6" x 4.7" x .7" 12cm) and light weight ( 3oz., 85g). Measures wind speed from 0 - 99.9 mph.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 3417SB Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Mitutoyo America Corporation Brand: Mitutoyo Model: 1923T-10

Mitutoyo 1923T-10 Dial Indicator, .0005, .05 In, 3/8, LB.

Manufacturer: Q-Mark Manufacturing Inc Brand: Q-Mark

M3 stylus, 0.3 mm carbide ball, stepped carbide shaft, stainless steel base, 20.0 mm overall length. Major shaft diameter is 1.0 mm. Intermediate shaft diameter is 0.50 mm. Minor shaft diameter is 0.20 mm. Stylus weight is 0.57 gram.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2514S Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Fowler Brand: Fowler

Includes Mag base with post and dual diameter rod Indicator which features 1" range; .001" graduations; reading: 0-100; 2-1/4" dial diameter and includes rod connector and holding clamp Shop-hardened case Features For direct measurements Rotates for setting at any point Carbide contact point