Depth Gauges - Page 11

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 527-402

The Mitutoyo Series 527 Vernier Depth Gauges, Hook End Type, Metric, depending on the model, have a measurement range of 0 to 150mm, a resolution (or smallest graduation interval) of 0.05mm, with + or – 0.05mm of accuracy; 0 to 200mm, a resolution or 0.05mm, with + or – 0.05mm of accuracy; or a range of 0 to 300mm, a resolution of 0.05mm, with + or – 0.08mm of accuracy. The vernier scale provides precise measurements. The end of the main scale is hook-shaped to allow depth and thickness measurements of a projected portion or lip in a hole, in addition to standard depth measurements. These gauges are made of hardened stainless steel and the bases of the units (100mm long) and measuring faces are hardened and lapped for accuracy. An optional wider extension base is sold separately. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: At-A-Glance Brand: At-A-Glance

Technical Specification Item Level Gauge Type Tank Tank Depth 24 Connection Size 2 NPT Calibration Unit Material Inner Glass, Outer Plastic Calibration Unit Increments 1/8s of a Tank Resolution 1/8 of a Tank Gasket Material Duro Nitrile Bushing Material 316 Stainless Assembly Nut Material Aluminum Rod Material 316 Stainless Rivet Material Stainless Steel Float Material Stainless Steel Float Dia. 1-3/8 Temp. Range -20 to 200 Degrees F Pressure Rating 70 PSI Manufacturers Warranty Length 1 Year Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: Aircraft Tool Supply Brand: Aircraft Tool Supply

A convenient tool to determine the correct length and diameter Hi-Lok to use . Just hook it through the hole and take the reading directly from the scale. Graduated in inches on one side, and millimeters on the other.

Manufacturer: Aircraft Tool Supply Brand: Aircraft Tool Supply

Maintenance standards require that all rivet be no less than 2 diameters (2D) and no more than 4 diameters (4D) from the edge of the sheet, with the optimum distance being 2.5 diameters (2.5D). This tool will accurately gauge the distance of rivet holes from the edge of the sheet to verify that they are within these standards. Simply slide the tool against the edge of the sheet and verify that it aligns with the centerline of the rivet holes. You can also use it to establish the ideal centerline by the same technique. One side gauges distances for 1/8" (-4) and 5/32" (-5) rivets, and the other is for 3/16" (-6) rivets. Overall dimensions: 3" (76mm) long, 1" (25mm) wide, .125" (3mm) thick. CNC machined in the USA from aircraft grade aluminum.

Manufacturer: Keson Brand: Keson Model: DG15M

Developed for seismographic measuring, these tough fiberglass tapes are used by a variety of industries to measure depth. Attach any weight to the snap ring and lower to measure depth. The depth gauges are incredibly durable, flexible and lightweight, with graduations printed in black and red on white under a clear coat. Numbers are graduated on both sides from the weighted end of the tape strap. Tensile strength is 100 kg (200 pounds).

Manufacturer: Hexagon Metrology Brand: Standard Gage

The Standard Gage 00564001 T-Bar Depth Measuring Base attaches to the ruled blade of 6" (150mm) scale calipers to aid depth measurement and is 76.2mm long to span wide holes and recesses for stable measurements. It has a locking nut for securing in place along the blade and accommodates blades up to 16.2mm wide. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display. Standard Gage manufactures precision measuring equipment and metrology hand tools. The company is headquartered in North Kingstown, RI.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-090-007-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Ben Meadows Brand: Ben Meadows

Stream Gauge Makes the Best Permanent Marking Device Instantly see how high the water is with this Ben Meadows Fiberglass Stream and Staff Gauge! Fiberglass construction stands up to the elements, making it a smart choice for long-term use in rivers, streams, lakes, ponds and swamps. Easy to read at long distances. Protected by a nonglare coating. Measures 4"W. English measuring system is numbered in feet, tenths and hundredths; 20-24'. Choose Mounting Hardware (No. 125139), sold separately, to anchor the Stream Gauge.

Manufacturer: Ben Meadows Brand: Ben Meadows

Instantly see how high the water is with this Ben Meadows Fiberglass Stream and Staff Gauge! Fiberglass construction stands up to the elements, making it a smart choice for long-term use in rivers, streams, lakes, ponds and swamps. Easy to read at long distances. Protected by a nonglare coating. Measures 4"W. Metric measuring system is numbered in meters, decimeters and centimeters; 2.44-3.66m. Choose Mounting Hardware (No. 125139), sold separately, to anchor the Stream Gauge.

Manufacturer: Ben Meadows Brand: Ben Meadows

Stream Gauge Makes the Best Permanent Marking Device Instantly see how high the water is with this Ben Meadows Fiberglass Stream and Staff Gauge! Fiberglass construction stands up to the elements, making it a smart choice for long-term use in rivers, streams, lakes, ponds and swamps. Easy to read at long distances. Protected by a nonglare coating. Measures 4"W. Metric measuring system is numbered in meters, decimeters and centimeters; 4.88-6.10m. Choose Mounting Hardware (No. 125139), sold separately, to anchor the Stream Gauge.