|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $78.99
Manufacturer: T&O
Brand: Toto
Manufacturer: T&O
Brand: Toto
T&O Depth Gage Range: 0~6" Hardened base and measuring face. Inch/metric conversion. Zero-set at any position. Accuracy: ±.001" Resolution: .0005" (.01mm) Base width: 3.93" (100mm) TTC Caliper Range: 0~6" Resolution: .0005" Inch/metric conversion. Remembers origin in the off position. SPC output.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $81.92
Manufacturer: Starrett
Brand: Starrett
Model: PT22431
Manufacturer: Starrett
Brand: Starrett
Model: PT22431
The Starrett PT22431 depth attachment stabilizes the caliper while measuring the depth of grooves and bores. This attachment allows for perpendicular entry of the depth rod into a hole or groove, for accurate depth measurements. It attaches to the caliper by tightening a screw and removes easily when finished. Place the caliper vertically on a flat surface when tightening the screw to ensure the end of caliper and attachment are evenly lined up, for accuracy during measurement. Attachment is compatible with Starrett 6â€, 9â€, and 150 mm calipers.
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $108.00
Manufacturer: Western Instruments
Brand: Western Instruments
Manufacturer: Western Instruments
Brand: Western Instruments
The Tri-Gauge Pit Gauges is today's most versatile Lever Pit Gauge, with its Metric and dual Imperial Scales. Additionally, the Tri-Gauge serves as a basic Weld Inspection Gauge for; Undercut Depth, Weld Crown Height, a Porosity (diameter) Comparator; and both Metric and Imperial Rules. The Tri-Gauge Pit Gauges is fitted with a Patented pointer Offset Correction for improved accuracy and repeatability. Lever Pit Gauges are intended to evaluate corrosion, and not as an absolute measuring tool. The Tri-Gauge is supplied with a Pocket Protector type Case and Instructions.
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $111.93 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 571-211-30
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 571-211-30
|
The Mitutoyo Series 571 ABSOLUTE Digimatic LCD Depth Gauge, Caliper Type, Inch/Metric, depending on the model, have a measurement range of 0 up to 8" (0 to 1000mm), and a resolution (or smallest graduation interval) of 0.0005" (0.01mm), with up to + or - 0.001" of accuracy. The LCD screen displays in both inches and metric, and can keep track of the origin point for the life of the battery (about 3 years under normal use). The bases are either 100mm or 250mm long, and the measuring faces of the units are hardened, ground, and lapped for durability and accuracy. The gauge conforms to European Conformity (CE) marking and certain models in this series conform to the Ingress Protection 67 (IP67) standard. The display has origin-set, zero, and data output functions for convenience. The units support SPC output. The gauges in this series include an SR44 battery. Optional SPC cables, wider bases (for up to 450mm range models), and an LCD with data hold are sold separately. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $126.81 59% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 440MZ-150RL
Manufacturer: Starrett
Brand: Starrett
Model: 440MZ-150RL
|
The Starrett 440, 445 Vernier Depth Gauges, Ratchet Stop, Lock Nut, Micrometer Type, Metric, depending on the model, have a measurement range of 0 to 75mm, 0 to 150mm, or 0 to 225mm; a resolution (or smallest graduation interval) of 0.01mm; with + or – 0.002mm of accuracy. The vernier scale enables precise measurements in fine units. These gauges include measuring rods, 3.2mm or 4mm diameter, to cover the intended range. The bases are available in a choice of 63.5mm, 75mm, 100mm, or 150mm long, and all measuring surfaces of these units are hardened, ground, and lapped for durability and accuracy. These gauges have a ring-type knurled lock nut, ratchet, and speeder for stability and to apply uniform pressure and make quick adjustments for precise measurements. These units include a protective case. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $142.72 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 129-109
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 129-109
|
The Mitutoyo Series 129 Vernier Depth Gauge, Interchangeable Rods, Micrometer Type, Metric, depending on the model, have a measurement range of 0 to 50mm, 0 to 100mm, or 0 to 150mm, and a resolution (or smallest graduation interval) of 0.01mm. (See the product catalog for information on accuracy.) The vernier scale provides precise measurements. These gauges include interchangeable 4mm diameter measuring rods (2, 4, or 6 rods included, depending on the measurement range) for flexibility in measuring range. The units have a ratchet stop for uniform pressure and a measuring rod clamp for stability. They have a satin chrome finish on the body for readability and the bases are made of hardened steel for durability and accuracy. They come in a fitted plastic case. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $148.16 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 7237
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 7237
|
The Mitutoyo 7237 dial depth gauge is for measuring the depth of holes or other depressions. This gauge has a measurement range of 0 to 8.0", graduations of 0.001", and an accuracy of + or - 0.002". The dial indicator is a back plunger type for reading from above with a white face for precise and readable measurements in inches. This item comes with a carbide-tipped ball contact point and four extension rods (0.5", 1", 2", and 4") for flexibility in measuring range. The base of this model is 4 x 0.63 inches (W x D) for stability. (W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) This gauge has a measuring force of 1.4 Newtons (N) or less.SpecificationsRange0 to 8.0"Graduations0.001"Accuracy+ or - 0.002"FaceDial with white face displays in inches, horizontal indicatorPointsBall shaped, carbide-tipped contact pointExtension rodsFour (0.5", 1", 2", and 4")Stroke0.2"Measuring forceLess than 1.4NDimensions64mm height, 39.6mm face diameterBase dimensions4 x 0.63 inches (W x D)Shipping weight200gW is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.What's in the Box?Mitutoyo 7237 depth gaugeContact pointExtension rod, 0.5"Extension rod, 1"Extension rod, 2...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $149.95 1% OFF
Manufacturer: Jb Industries
Brand: JB Industries
Manufacturer: Jb Industries
Brand: JB Industries
JB Industries, DV29, J/B MICRON GUAGE BLANKOFF TEST UNIT, J/B MICRON GUAGE BLANKOFF TEST UNIT
-
5.0 of 5.0 with 5 Reviews
SALE PRICE: $152.75 51% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 445AZ-6RL
Manufacturer: Starrett
Brand: Starrett
Model: 445AZ-6RL
|
The Starrett 440, 445 Vernier Depth Gauges, Ratchet Stop, Lock Nut, Micrometer Type, Inch, depending on the model, have a measurement range of 0 to 3", 0 to 6", 0 to 9", or 0 to 12"; a resolution (or smallest graduation interval) of 0.001"; with + or – 0.0001" of accuracy. The vernier scale enables precise measurements in fine units. These gauges include 1/8" diameter measuring rods to cover the intended range. The bases are available in a choice of 2.5", 3", 4", or 6" long, and all measuring surfaces of these units are hardened, ground, and lapped for durability and accuracy. These gauges have a ring-type knurled lock nut, ratchet, and speeder for stability and to apply uniform pressure and make quick adjustments for precise measurements. These units include a protective case. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $154.42 46% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 56C
Manufacturer: Starrett
Brand: Starrett
Model: 56C
56C Small Surface Gage-7"Spindle-2"X1-1/2"Base
|
|