Depth Gauges - Page 7

Manufacturer: Fowler Brand: Fowler Model: X-Depth 22

X-Depth 22 22 Dial Depth Gage Fowler's 0-22 Dial Depth Gages comes with six interchangeable rods with a 0-22 capacity, carbide contact point and 2 extra points for small applications. Provides rapid measurement of hole depths. Includes: shop hardened case Rod extensions of 1 , 2 , 3 , 4 , 5 and 6 2 extra points Features: Measurements automatically registered directly on dial face in .001 graduations. The dial indicator can be easily adjusted for zero setting. Graduation: .001 0-1 travel indicator Accuracy of the dial indicator meets Federal specifications. Rods can be connected together for a full 0 22 capacity. 2 extra points for small hole applications; one 0.078 dia. x 1 long and one needle point x 1 long. Base is hardened steel, ground and microlapped for accuracy. Standard 4-48 thread removeable carbide ball contact point. Rack spindle and pinions are hardened stainless steel to ensure long wear and continuing accuracy.

Manufacturer: Starrett Brand: Starrett Model: 57A

' Surface Gage, Base Size (In.) 3 x 2-9/16, Upright Post Dia. (In.) 5/16, Snug 5/16 In., Cast Iron Base, Black Finish, 9 In. Spindle Length, (2) Gage Pins, Includes Scribers, For Use With Scribers and Indicators '

Manufacturer: Fowler Brand: Fowler Model: X-Depth 22-E

X-Depth 22-E 0 - 22 Electronic Depth Gage Fowler's Electronic Depth Gage comes with six interchangeable rods with a 0 22 capacity, carbide contact point and 2 extra points for small applications. Provides rapid electronic display measurement of hole depths. Includes: 2 extra points 6 rod extensions shop hardened case Features: Rod extensions of 1 , 2 , 3 , 4 , 5 and 6 are included. Rods can be connected together for a full 0 22 capacity. Includes 2 extra points for small hole applications; one 0.078 dia. x 1 long and one needle point x 1 long. Base is hardened steel, ground and microlapped for accuracy. Base Size: 4 x .630 Standard 4-48 thread removeable carbide ball contact point. Indicator Features: 0-1 travel electronic indicator with 3/8 stem. Resolution: .0005 /.01mm Direct inch/metric conversion Zero reset at any position On/off button Hold feature Relative/absolute measuring

Manufacturer: Starrett Brand: Starrett Model: 57B

57B Full-Sized Surface Gages- 9"/12" Spindle

Manufacturer: Starrett Brand: Starrett Model: 257D

The Starrett 257D full-sized surface gauge has both a 12"/300mm and 18"/450mm spindle for mounting onto a hardened steel base, with an 8-1/2" scriber for accurately scribing lines, transferring measurements, and probing surfaces in inspection work. The spindles are 3/8" in diameter. The included scriber is 8-1/2" (216mm) in length and 5/32" (4mm) in diameter, and is held to the spindle by a sliding snug with a knurled, ring-type lock nut for secure positioning. The steel base is hardened, ground, and lapped for a smooth, flat surface, and measures 3-1/2 x 3-3/16 inches/90 x 80mm (W x D; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back). Four frictionally held gauge pins in the base can be pushed down and referenced against the edge of a surface plate or T-slot for linear work. The satin chrome finish resists rust and is glare-free. A surface gauges is a tool for machinists and toolmakers to mark lines on a workpiece, transfer measurements from one workpiece to another, and for probing surfaces in inspection work. The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.

Manufacturer: Western Instruments Brand: Western Instruments

The Western Instruments N88-4-I Pocket Pit Gauge with Inch Dial Indicator, Dual Edge Blade (Reversible) 1.5" (38mm) Long and Spot Base is a precision instrument that allows the Corrosion Inspector to conveniently measure Pit Depth or material loss in areas of Weight-Loss Corrosion. The N88-4 Pocket Pit Gauge by Western Instruments comes with a reversible dual edge blade with a 1.5 inches (38mm) long side and another spot base. Western Instruments Pit Gauges assure compliance with vessel, pipeline, tank and OCTG specifications for corrosion and erosion depth measurement

Manufacturer: Western Instruments Brand: Western Instruments

The N88-4-M Pocket Pit Gauge with Metric Dial Indicator, Dual Edge Blade (Reversible) 1.5" (38mm) Long and Spot Base is a precision instrument that allows the Corrosion Inspector to conveniently measure Pit Depth or material loss in areas of Weight-Loss Corrosion. The N88-4 Pocket Pit Gauge by Western Instruments comes with a reversible dual edge blade with a 1.5 inches (38mm) long side and another spot base.Western Instruments Pit Gauges assure compliance with vessel, pipeline, tank and OCTG specifications for corrosion and erosion depth measurement.

Manufacturer: Starrett Brand: Starrett

52173 Depth Gage

Manufacturer: Legacy Brand: Legacy Manufacturing Model: TH0330

Proper inflation will improve gas mileage and tire wear. Calibrated in 1/32 inch units. Replace tire if center groove is less than 2/32 inch deep.

Manufacturer: APEX TOOL GROUP/ KD Brand: Apex Tool Group

Gauge 2428-75 Apex Tool Group.