Calipers - Page 61

Manufacturer: Flexbar Brand: Flexbar

for Checking Outside Diameters, Recess Diameters, etc. Spring loaded Arms and ceramic contact Points for accurate Measurements under constant pressure. Push-button to close Arms. Dial Reading .200" per revolution (2x.100"). Revolution counter. Spring loaded-constant Measuring pressure. Each Caliper has 1" movement. Can be Set With Micrometer or ring Gage. 2" Dial Face Diameter. Length of Arm is 3 1/4". Measuring Anvil length = 13/32". Measuring Anvil Thickness = 3/32". Can be Set With Gage Blocks or Micrometer Standards. includes fitted Case. Model No. 18553, External Dial Caliper Gage, 1.125"-2.125" Range.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 209-552

The Mitutoyo 209 series Digimatic internal tube thickness caliper gauge has a combination analog/digital LCD display and large measuring depth for taking inside dimension (ID) measurements of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. Depending on the model, these units may come with either ball contact points suitable for measuring internal wall thickness of tubes, or disc contact points suitable for measuring flat surfaces. The calipers have an Ingress Protection 67 (IP67) rating, which ensures that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes. At minimum, functions include zero-set, preset, automatic power off, inch/metric, and conversion data hold. An output port transmits results to a Mitutoyo miniprocessor or computer for statistical process control (SPC) through an interface cable (sold separately). The unit comes with, and is powered by, a single AA battery that lasts approximately 350 hours with continuous normal use. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the m...

Manufacturer: Mitutoyo America Corporation Brand: Mitutoyo Model: 209-917

Mitutoyo Dial Caliper Gage 209-917, External Measurement Type, 0-2.0 In, .001 In, 169mm Depth.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 209-402 Color: White

The Mitutoyo 209 series external measurement caliper gauge has a dial display and large measuring depth for taking outer dimension (OD) comparison measurements in metric units of thickness of grooves or tubes, and other hard-to-reach external dimensions.. Depending on the model, these units come with pairings of ball contact points suitable for measuring external wall thickness of tubes, and/or chisel contact points suitable for measuring flat surfaces. The calipers’ jaws are spring loaded, which provide the point contacts with constant measuring pressure. The calipers have an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display at any point along the slide, with an LCD that displays a single value in English and/or metric units. Mitutoyo manufactur...

Manufacturer: EK Brand: EK

Manufacturer: TOOGOO(R) Brand: TOOGOO(R)

* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings. TOOGOO(R) 3.25" 80mm Brass Vernier Caliper Gauge Sliding Gem Bead Tool Jewelers Inches Ruler.This item is 3.25" (80mm) Precision Sliding Brass Gauge Caliper. It is a indispensable tool for Jewelry Designers,or when you are going to bead shows.Material: Solid Brass MetalPrecision sliding brass gague measures up to 3.25" (80mm) in increments of 1/16" (1mm).Vernier Design will measure inside and outside of object.Easy to read numbersUltra precision and effortless operationPackage Includes: 1 x Brass Metal Sliding Gauge Caliper

Manufacturer: Papa John'S Toolbox Brand: Papa John'S Toolbox

6" Outside Spring Caliper.

Manufacturer: EK Brand: EK

Manufacturer: EK Brand: EK

Manufacturer: uxcell Brand: uxcell Model: a15052100ux0889

Metric and inches units, dual side marking. With hole for easily hanging with hook or string. Metal material can be use for long time, good tool for carpenter.