Dimensional Measurement - Page 1023

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-229-206-0

Fowler 52-229 series outside Vernier-scale micrometers have a choice of measuring range and a flat anvil/spindle pair for general purpose measuring. The Vernier scale has 0.0001" microfine graduation intervals on a satin chrome finish for precise readings. The positive locking nut on the spindle locks measurements in place for accurate readings and the zero adjustment on the sleeve ensures accurate measurements. The anvil/spindle pair have 0.256" diameter hardened, precision-ground, and micro-lapped carbide measuring faces with 0.00003" flatness and 0.00005" parallelism on 0 to 1" micrometers to provide accurate measurements. Friction thimble with ratchet stop applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The ratchet stop-thimble can be used independent of the friction thimble. It provides an audible sound and stops the spindle from turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The heat-insulated frame helps reduce temperature-related expansion or contraction, providing accurate measurements, and protects the operator's hands from heat. The micrometer includes a wrench and fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay type Vernier scale Anvil/spindle style Flat Measuring range Varies Graduation interval 0.0001" Thimble style Friction with ratchet stop Anvil/spindle diameter 0.256" Flatness 0.00003" Parallelism 0.00005" on 0 to 1" micrometersMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micromet...

Manufacturer: HHIP Brand: HHIP Model: 4101-0013

Supplied in a plastic, sturdy, dust-proof case. ~ Sizes are marked on the case for easy Identification. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Class ZZ ~ Overall length is 2". ~ Set is -0.0002" + 0.0000".

Manufacturer: HHIP Brand: HHIP Model: 4101-0013

Supplied in a plastic, sturdy, dust-proof case. ~ Sizes are marked on the case for easy Identification. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Class ZZ ~ Overall length is 2". ~ Set is -0.0002" + 0.0000".

Manufacturer: Anytime Tools Brand: Anytime Tools

Super Precision Bore Gauge Deep cylinder bore gageing to a depth of 10" affords the user the ability to measure out-of-round conditions and tapers of cylinders without the necessity of removing pistons - critical wear area of the cylinder can be reached with this gauge. Super precision up to 0.0005" at range from 1.4" to 6"Features:Super Precision Deep Bore GaugeMeasures bore to 10" deep, Range 1.4" to 6" diameter0.0005" Crisp Precision GraduationsIncludes gage and interchangeable contact pointsCarbide tip on measuring plungerDial indicator contains jeweled bearings, ABS storage case included

Manufacturer: iGaging Brand: iGaging

iGaging Super high quality scale magnifier with 9 reticlesFeatures:Lighted with 7 LEDs. Can be used in total darkness!Distortion Free. Super High Resolution. 9 Measuring Scales Included - measures large variety of dimensions such as radii, angles length Super high precision laser etched glass reticles Includes protective padded case Viewing Area: 1-1/4". Reticle Diameter: 34mm

Manufacturer: IN-LINE INDUSTRIES Brand: Inline Industries

Quickly set-up, tune up, and check the accuracy of your shop's tools with this system. Check table saw blade and fence alignment, arbor and blade run-out, miter slot to blade squareness, arbor/chuck run-out, jointer/planer head to table parallelism, jointer/planer knife alignment, out-feed table alignment; router/shaper spindle run-out, or any other set up or alignment measurement you desire. The A-LINE-IT Basic Kit is the perfect starter kit for hobbyists and small shops. The 1" capacity dial indicator reads in .001" increments for absolute precision. Self adjusting miter groove bar with leveling screws and spring plungers for perfect fit in your miter slot. Dial indicator mounting bar measures 3/4" x 3/4" x 5-1/2", miter groove bar measures 3/8" x 3/4" x 6-1/4". Comes with hardware and hex wrench for assembly, instructions and instructional DVD for expert guidance in getting the best performance and accuracy from your woodworking machines.

Manufacturer: TEKTON Brand: TEKTON Model: 7172

7172 Features: -Magnetic base.-Material: Cast steel base with built in magnet.-On/off switch releases magnet.-Fully adjustable 2 arm design.-Precision adjustment knob for fine positioning.-Used for dial indicator.-3.82" H x 10.25" W x 2.5" D, 3.35 lbs.

Manufacturer: TTC Brand: TTC

Measuring faces hardened, precision ground and micro-lapped for absolute accuracy. Clamp for repetitive setting. Adjusting slide for fine adjustment. .100" per revolution.

Manufacturer: INSIZE Brand: INSIZE Model: ISP-Z3015-DEMO

Demo sample.

Manufacturer: Vermont Gage Brand: Vermont Gage

These economical general purpose Vermont pin gages make quick and accurate measurements and can be used to measure hole sizes, calculate distances between holes, gage slot widths and can also be used for Go or No-Go gaging. Packaged with a rust preventative features, these pins maintain an indefinite shelf life.