Dimensional Measurement - Page 1039

Manufacturer: Carrera Precision Brand: Carrera Precision Model: CP5924

Features »Extra Large easy to read digital LCD screen.. »Accurate to 1/1000th of an inch. »Four methods of measurement: Inside, outside, depth and step from 0'' to 12''. »Metric conversion & zero buttons. »Standard Strong stainless steel frame. »Stepped end depth rod for measuring small holes up to 12'' deep. »Thumb wheel allows for easy, one-handed adjustment. »Screw lock can lock the caliper at a set dimension for multiple measurements. »Zero button lets you zero the measurement at any position. Great for measuring tolerances in the positive and negative.Specifications »Resolution 1/64" - 0.0005"/ 0.01mm.. »LCD Display. »Max Measuring Speed: 1.5 m/sec., 60 in/sec. »Measuring System: Linear Capacitive Measuring System. »Measuring Range: 0-304 mm/0-24 in. »Resolution: 0.01mm/0.0005in.What's In The Box? »Carrera Precision Standard 24-Inch Digital Caliper»Extra Battery»Custom Fitted Storage CaseWarranty »30 Day Satisfaction Guarantee.

Manufacturer: Wellzion Brand: Fristaden Lab

Model: EC-770 Probes: F-Probe, N-Probe Measuring Principle: Magnetic Induction, Eddy Current Measuring Range: 0 to 1300um (0 to 51.18mils) Accuracy: ± (3%+2um) Resolution: 0um~999um(1um); 1000um~1300um(0.01mm) Calibration: 1-4 Points, 0-Point Data Group: 1 Direct Group (readings not stored), 4 General Group (readings stored automatically) Stats: No. of Readings, Mean, Minimum, Maximum and Standard Deviation Units: um, mm, mils Alarm: High/Low Alarm l=Limit, Displayed When Limit Exceeded Min. Curvature Radius Convex: 1.5mm Min. Curvature Radius Concave: 25mm Min. Measuring Area Diameter: 5mm Min. Thickness of Substrate: F-Probe: 0.5mm, N-Probe: 0.3mm Max. Measure Rate: Readings Per Second Computer Interface: Download Data via USB Interface; Support PC Analysis Software Power: 2 x 1.5V AAA Battery Operation Environment Temperature: 0 to 40℃; Humidity: 20% to 90% Unit Dimensions: 110mm*53mm*24mm This Digital Paint Coating Thickness Gauge, sold by Fristaden Lab, features a F-Probe and N-Probe. It can measure magnetic induction and eddy current automatically or by selection. The two measurement modes are single and continuous. Readings are taken in direct and general modes, with each mode capable of storing up to 80 readings. Readings can be recalled and deleted individually and in groups. The digital, LCD display features standard menu options, as well as low battery and error indicators. Data is transferred via USB interface. One Year Manufacturer Warranty. Included: 1 Coating Thickness Gauge 1 Aluminium Substrate 5 Standard Foil 1 USB Cable 2 1.5V AAA Battery 1 User Manual This Painting Thickness Gauge is sold by Fristaden Lab, an American-brand scientific equipment retailer.

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: The L.S. Starrett Company Brand: Starrett

Starrett End Measuring Rod, 7/16In, w/Rubber Handle 234A-13 Micrometer Accessories End Measuring Rod, Dia. 7/16 In., Range

Manufacturer: Fowler Brand: Fowler

Economy Dial Gage Stand with microfine adjustment knob for zero setting. Features Accepts all dial indicators with 3 8" stems. Column 5 8" from back edge of working surface. Column diameter: 1" Fine adjustment: 3 8". Positive lock screw Capacity of 6-1 2" from working surface Bracket with 1 4" bolt for dial indicator is 2-1 4" from center of column Microfine adjustment knob for zero setting Microscrew fingertip control Ground steel post mounted at right angles to the base Ground working surface 5-1 2" x 4-1 4"

Manufacturer: Central Tools Brand: Central Tools

CE4346 Features: -Dial indicator. -Range: 0.2''. -Graduation: 0.001''. -Reading 0-100. Product Type: -Testers. Quanitity: -Single. Generic Dimensions: -Back plunger, 0.25'' diameter shank. -Width: 1.5''. Dimensions: Overall Product Weight: -0.26 Pounds.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-275-002-1

Fowler 52-275-002-1 Inside Micrometer, 1-2" Measuring Range, 0.001" Graduation, +/- 0.0002" Accuracy. Microfine graduations (.001" or .01mm) on a satin chrome finish permit easy reading. With Fowler Inside Micrometer, you are assured of smooth operation and stabilized uniform accuracy. The frame is specially designed to enable the micrometer to provide extremely accurate small internal measurements. Measuring faces are fully hardened, precision ground and microlap finished to assure exceptionally accurate measuring. Ratchet stop thimble assures exact and repetitive readings. Easy zero adjustment on the sleeve. Meets or exceeds Federal accuracy specs. Fowler 52-275-002-1 1-2" inside micrometer comes with a setting ring, a spanner wrench and a case. Fowler 522750021inside micrometer comes with setting ring, a spanner wrench and a case. It also has full 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.

Manufacturer: Starrett Brand: Starrett Model: T436.1XP-1

The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a tapered frame for measuring narrow slots and tight places. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001” or 0.0001” depending on the model, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 101-119

The Mitutoyo 101 series outside micrometer has a tapered frame for measuring narrow slots and tight spaces, a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame, thimble and sleeve have a satin chrome rust- and glare-resistant finish. The vernier scale on the thimble and sleeve is graduated to 0.0001”. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The unit comes with a fitted plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: 436.1XP-1

The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a tapered frame for measuring narrow slots and tight places. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001” or 0.0001” depending on the model, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.