Dimensional Measurement - Page 1040

Manufacturer: INSIZE Brand: INSIZE Model: 1144-200A

Electronic double hook depth gage, 0-8"/0-200mm.

Manufacturer: Fowler Brand: Fowler Model: 52-225-112-0 Color: Silver

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Manufacturer: Advanced Systems & Designs Brand: Advanced Systems & Designs

Using a high quality 6-pin connector, this Advanced Systems & Designs gage cable connects the Mahr Federal Maxum III or Maxum Plus digital indicator to a Digimatic 10-pin output. This gage cable is designed to work with the Advanced Systems & Designs GageMux® or other similar Digimatic input devices. The cable is directly connected to the GageMux® or other devices that recognize the Mitutoyo Digimatic signal and does not obtain any power from the gage. The data transfer can be triggered using any of the following methods: • Using the data send button on the gage, if it has one • Using the Footswitch on the GageMux® (or equivalent triggering method on similar devices • Sending a gage read command from the computer to the GageMux®. A detailed operation manual is included with this gage cable including instructions on how to properly configure your Maxum III gage for the proper output format. Can ship only within the United States.

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's NPTF Tapered Pipe Plug Gages are used to check tapered internal pipe threads. Perfect for inspecting standard pipe and pipe fittings.

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: INSIZE Brand: INSIZE Model: ISM-MTM-EP20X

Wf20x eyepiece.

Manufacturer: iGaging Brand: iGaging Model: 35-700-25

Igaging absolute technology indicator the imaging digital electronic indicator with absolute encoder always remembers and traces absolute origin zero or preset data. It provides unlimited measuring speed without losing its origin. This indicator will indicate absolute position when turned on. Indicator face can be rotated up to 330°. features: SPC/USB data port indicator face can be rotated up to 330° absolute encoder technology IP54 protection read and convert inch/mm display change measuring direction - positive up or positive down origin set preset value tolerance function zero/ABS - switch between incremental and absolute measuring Super large LCD display shank diameter: 3/8" Carbide tip 4-48 threaded tip 2 years warranty specifications: range: 1"/25mm resolution: 0.00005"/0.001mm accuracy: 0.00020" repeatability: 0.00005"/0.001mm battery: 1x CR2032 (2 included).

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-514E Color: Yellow

The Mitutoyo 513 series Pocket type dial test indicator has a yellow face, an 8mm stem diameter, and metric measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The pocket-type dial test indicator has a horizontal face and three dovetail mounts, and can be mounted either horizontally or vertically from either the front, top, or back of the indicator. It has jeweled bearings that provide high sensitivity and accuracy, a reversible measuring direction, and a contact point that can be adjusted within 220 degrees of the axis. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The basic set includes a dial indicator, a 2mm carbide contact point, an 8mm diameter stem, a knurled clamp ring, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, and a yellow face that meets ANSI standards for metric indicators.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicato...

Manufacturer: Noga Brand: Noga

Noga / Mitutoyo Combo NF61003 Magnetic Base 176 lb. Hold & MM Test Indicator Set