|
|
-
4.0 of 5.0 with 10 Reviews
SALE PRICE: $177.00 1% OFF
Manufacturer: Merlintools
Brand: Merlintools
Manufacturer: Merlintools
Brand: Merlintools
metric M62 x 2.0mm set thread ring gage.
-
4.0 of 5.0 with 3 Reviews
SALE PRICE: $177.80 1% OFF
Manufacturer: INSIZE
Brand: INSIZE
Model: 2872-10
Manufacturer: INSIZE
Brand: INSIZE
Model: 2872-10
Electronic thickness gage, 0-.4"/0-10mm, resolution 0005" 0/01mm.
-
4.0 of 5.0 with 2 Reviews
SALE PRICE: $178.64 15% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 599-1-31
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 599-1-31
|
The Brown & Sharpe chrome-framed outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a convertible friction drive thimble mechanism for uniform or variable pressure during adjustment, and tungsten carbide faces for wear resistance.The micrometer’s frame, thimble, and sleeve have a satin chrome rust- and glare-resistant finish. Frames with a base measurement range greater than or equal to 1†are heat-insulated to help reduce temperature-related expansion or contraction. The vernier scale on the thimble and sleeve is graduated to 0.0001â€. Depending on the model, graduation markings on the barrel may be straight or slanted to help reduce parallax errors when reading. The ratchet mechanism can be disabled for variable adjustment control. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. /p>Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.
-
4.0 of 5.0 with 2 Reviews
SALE PRICE: $179.90 26% OFF
Manufacturer: Gain Express Holdings Ltd.
Brand: Gain Express
Model: DT-156
Manufacturer: Gain Express Holdings Ltd.
Brand: Gain Express
Model: DT-156
|
This compact & handy Professional Gauge is designed for non-destructive, fast and highly accurate/precise coating thickness measurement. Features: Non-magnetic coatings (e.g. paint, zinc) on steel Insulating coatings (e.g. paint, anodizing coatings) on no-ferrous metals Two Operating/working mode :  *Direct mode : recommended for simple, quick & occasional measurements. Though can't be saved but hold up to 80 current readings + 5 statistics values  *GROUP mode : permits measurement & storage of readings in a memory. 4 memory groups, 80 saved readings for each group 400 Memory readings (80 DIRECT and 320 GROUP readingS) V-Groove on probe for small cylindrical parts USB interface for PC software (compatible with windows 98/2000/xp/Vista/Win7) Specifications : Guaranteed Tolerance :  0~850 µm (±3% + 1µm) ; 850 ~ 1250µm (±5%)  0 ~ 33.46 mils (±3% + 0.039mils) 33.46~49.21mils (±5%) Accuracy :  0.50um(0.1um) 50~850um(1um) 850~1250um(0.01mm)  0~1.968mils(0.001mils) 1.968~33.46mils(0.01mils) 33.46~49.21mils (0.1mils) Min.curvature radius : 1.5mm / 3mm Diameter of Min.area : 7mm / 5mm Low Range Precision : 0.1µm / 0.1µm Working Temperature : 0~40°C (32~104°F) Working Relative Humidity : 20~90% RH Size : 110 x 50 x 23mm Weight : 100g Set Includes: 1 x Paint Coating Thickness Tester 5 x Calibration Foil 1 x Iron Substrate 1 x Aluminum Substrate 1 x Protective Carrying Case 1 x USB cable 1 x CD Software 2 x 1.5V AAA Battery English Instruction Manual
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $179.95 36% OFF
Manufacturer: iGaging
Brand: iGaging
Model: 35-070-B01
Manufacturer: iGaging
Brand: iGaging
Model: 35-070-B01
Blade micrometer is used for measuring where the standard micrometer spindle could not be accommodated. Igaging 0-1" digital quick micrometer absolute origin speedmic snap lever action gage igaging absolute origin speedmic uses the absolute encoding technology in which the sensor memorizes and traces an absolute origin zero position. Quickly measure with Super high precision lever activated - fully opens and closes in less than one second! linear moving sensor provides accurate and reliable measurements IP65 coolant proof measuring range: 0-1"/0-25MM Carbide tipped spindle resolution: 0.00005"/0.001mm accuracy: ±0.00015"/0.003mm fixed thimble. Spc/USB data output available (not included) search Amazon for item: b00inl0ba2. Ball attachment included. Case included 2 years warranty.
-
4.0 of 5.0 with 2 Reviews
SALE PRICE: $179.95 19% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 7327
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 7327
Mitutoyo 7327 Dial Thickness Gage, 0-01mm Range, 0.01mm Graduation, +/- 5 Micrometer Accuracy
-
4.0 of 5.0 with 45 Reviews
SALE PRICE: $179.99
Manufacturer: Meda - Superior Import
Brand: Meda - Superior Import
Manufacturer: Meda - Superior Import
Brand: Meda - Superior Import
• Inch/mm conversion. • Resolution .0005"/.01mm • Manual power on / off • Zero settings at any position. • SPC output
-
4.0 of 5.0 with 12 Reviews
SALE PRICE: $181.99 3% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 711FSAZ
Color: White
Manufacturer: Starrett
Brand: Starrett
Model: 711FSAZ
Color: White
|
The Starrett Series 711 Last Word dial test indicator has a balanced dial, a swiveling body, and inch measurements. The horizontal-face dial test indicator has a hard, chrome-plated, steel ratchet contact point for taking precise measurements in machining, layout, and inspection work. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. It has a balanced dial and a white face with half-yellow shading for accurate reading when used with a mirror or in a bore jig application. The positive reversing switch changes the reading direction. The indicator has a swiveling tubular body that can be mounted from the top or the body of the indicator using a body clamp, friction holder, or shank. The indicator has a jeweled lever action for smooth operation, and a replaceable contact point. This dial test indicator meets or exceeds accuracy and performance requirements of national and international standards, and is traceable to the United States National Institutes of Standards and Technology (NIST). This indicator includes a universal shank with a long and short arm, a body clamp, and a storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found a...
-
4.0 of 5.0 with 7 Reviews
SALE PRICE: $183.00 1% OFF
Manufacturer: Vermont Gage
Brand: Vermont Gage
Manufacturer: Vermont Gage
Brand: Vermont Gage
Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $184.00 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: White
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: White
|
The Brown & Sharpe TESA Tesatast series dial test indicator has a white face, a 0.0787" stem diameter, and inch measurements. The indicator can make either horizontal or vertical measurements, and the choice of white or yellow dial help make measurements easy to read. The yellow face with contrasting black hand complies with ANSI standards for metric dial faces. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes an identification number and a declaration of conformity. The set includes a dial test indicator, a 0.080" (2mm) ball-end carbide contact point, a 0.310"(8mm) extension with dovetail, a point key, a Certificate of Accuracy and Traceability, and a storage box. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced ...
Viewing Page 1047 of 1520
|
|