Dimensional Measurement - Page 1048

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-145

The Mitutoyo 293 series QuantuMike Coolant Proof LCD micrometer has a digital single-value LCD readout that displays in metric units with resolution to 0.001mm. A ratchet thimble mechanism helps provide uniform pressure for precise, repeatable measurement. It also has a non-rotating spindle that helps provide steady positioning during measurement, and a QuantuMike spindle that feeds at a rate of 2mm per revolution for a higher rate of productivity than a conventional mechanism. It uses the Mitutoyo ABSOLUTE electrostatic capacitance linear encoder to help prevent overspeed errors and help ensure repeatable, precise measurement.The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. Depending on the model, an output jack transmits Statistical Process Control (SPC) data results to a computer or external device through an interface cable (sold separately). The micrometer has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior d...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 133-229

The Mitutoyo 133 series tubular vernier inside micrometer has a vernier scale in inch units for taking precise inside dimension (ID) measurements of the inside dimensions of cylinders, rings, and parallel surfaces. The micrometer head sleeve rotates to adjust the zero point to help provide accuracy. A locking clamp helps hold measurements in place. The vernier scale is graduated to 0.001”, and has a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: MEDA - SUPERIOR IMPORT Brand: Meda - Superior Import

All parts made of hardened tool steel and ground to highest accuracy. Squareness and parallelism are within .0002" per 5". Many ¼"-20 holes to facilitate clamping. One end rail. .200" step built into gage block roll so that gage blocks over .200" can be used to set very small angles. 5" distance between center rolls is accurate within .0002". All models have an offset hinge for added stability.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe chrome-framed outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a convertible friction drive thimble mechanism for uniform or variable pressure during adjustment, and tungsten carbide faces for wear resistance.The micrometer’s frame, thimble, and sleeve have a satin chrome rust- and glare-resistant finish. Frames with a base measurement range greater than or equal to 1” are heat-insulated to help reduce temperature-related expansion or contraction. The vernier scale on the thimble and sleeve is graduated to 0.0001”. Depending on the model, graduation markings on the barrel may be straight or slanted to help reduce parallax errors when reading. The ratchet mechanism can be disabled for variable adjustment control. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. /p>Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Teren Brand: teren

Applications: Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, etc. In industries of petroleum, shipbuilding, power station, and machine manufacturing. Parameters: *Display: 4Digit, 10mm LCD *Operating Principle: Ultrasonic *Measuring Range(metric/Imperial): 1.0~200 mm/0.04~8 inch *Battery Indication: Low Battery Indication *Sound Velocity: 1000~9000 m/s *Lower Limit Steel Pipes: Φ15x2.0mm Φ20 x 3.0mm determined by transducer *Calibration Block: Included *Resolution: 0.1mm(TM-8812C0.01mm) *Accuracy: +-(0.5%n+0.1) *Power off: Temperature: Auto Power off&Manual Power Off *Operating Conditions: Temperature: 0~40 degree, Humidity: less than 85%RH *Power Supply: 4x1.5V AAA(UM-4) Battery *Dimensions: 120x62x30mm *Weight :164g (Not Including Batteries) Package includes: 1. Main Unit 2. 5MФ8 Standard Sensor 3. Coupling Agent 4. Carrying Case 5. Operating Manual

Manufacturer: Vermont Gage Brand: Vermont Gage

These economical general purpose Vermont pin gages make quick and accurate measurements and can be used to measure hole sizes, calculate distances between holes, gage slot widths and can also be used for Go or No-Go gaging. Packaged with a rust preventative features, these pins maintain an indefinite shelf life.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-724

The Mitutoyo 511-724 Dial Bore Gauge has a measurement range of 50 to 100 mm and is accurate to + or - 0.002 mm. It is precise to 0.001 mm. This direct-measuring gauge uses a two-point contact system that can be used to detect geometry problems such as ovality, and taper and carbide-tipped contact points offer extended wear and improved abrasion resistance. A rugged cover protects the dial indicator.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Fowler Brand: Fowler

Includes wrench and case Series No. 52-248 offers Fowler standards of fine quality and accuracy. A variety of sizes covers a range of measuring applications. Features Hammertone blue baked enamel finish Microfine graduations on satin chrome finish and carbide tipped measuring faces Ratchet stop thimble for exact and repetitive readings Spindle thread is hardened, ground and lapped Anvil & spindle hardened and precision ground with microlap finish on tips All micrometers meet or exceed U.S. Federal specifications for accuracy Includes standard

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-506B

Mitutoyo Absolute Digimatic Solar Indicator ID-S, .5"-12.7mm, .0005"-.01mm, ISO, Stem Dia. 8mm, with flat back, SPC Output: yes

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-505

Mitutoyo Absolute Digimatic Solar Indicator ID-S, 12.7mm, .01mm, ISO, Stem Dia. 8mm, with lug back, SPC Output: yes