Dimensional Measurement - Page 1051

Manufacturer: Bosch Brand: Bosch Model: GOL26 Color: Blue

This Bosch Automatic Optical Level features a self-leveling compensator, both horizontal/vertical cross hairs and stadia lines, 26x magnification lens and large aperture for clear image Range: 330-feet, Accuracy: Up to 1/16-inch at 100-feet, Includes: Hard Case, Lens Cap, Plumb Bob, Adjustment Tools. Durable Design: All metal housing with IP54 protection. Extended Range: Powerful 26x magnification power allows for a working range of 330 Feet.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-554-622-0

The Fowler Internal Electronic Caliper Gage measures inside dimensions (ID) with 0.0008"/0.02mm accuracy and.0005"/0.01mm resolution, and has a digital, single-value readout LCD, absolute and incremental modes, and RS-232 output. This caliper measures ID for hole diameters and groove and tube thicknesses. The digital, single-value readout LCD shows inch and metric units for versatility when measuring. The unit offers absolute and incremental modes for taking intermediate or differential measurements and stores a preset reference for comparing measurements. The caliper is spring-loaded in the measuring direction for a consistent measuring force and improved measurement repeatability. A thumb lever retracts the movable point. This caliper can output data via direct RS-232 for capturing and recording data. The caliper has a 2"/5cm diameter plastic electronic housing, steel arms, and hardened steel contact point for durability. The caliper uses a 3V CR2032 battery (included). It also comes with an aluminum case with foam inserts to cushion the instrument. Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements that are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Caliper gages are used in production settings where specific diametrical or thick...

Manufacturer: YPG Gages Brand: YPG Gages Model: C10X

Sound, structurally stable, design and specifications, coupled with a highly experienced, solid manufacturing and quality management system, guarantees YPG Adjustable Limit Snap gages supplied into the USA market are of the highest quality. Gages can be 'Set, Sealed and Certified' to pre-determined Go/No Go sizes in YPG's accredited calibration laboratory. A fully stabilized cast iron frame forms the base of the 'C' type adjustable limit snap gage. A one piece, rectangular anvil and two adjustable square anvils all manufactured from hardened, lapped, tool steel, form the base of the measuring gage. The large anvil gauging surfaces of the type 'C' ensures a long life and a consistently high level of measuring capability and repeatability. Additionally, having only two adjustable anvils, the Go/No Go setting procedure is quick and straightforward. The Quality Management System operated by YPG is ISO 9001-2000 registered. This certification encompasses the entire organization and confirms the company's management system meets the required standard and in particular confirms the desire to exceed customer expectations and to be continually improving the products and services offered. All gages set at YPG are done in the company's state of the art, A2LA certified metrology laboratory. Product certification can be supplied on any gage calibrated or set in the laboratory. Adjustable Limit Snap Gages are precision gauging devices generally used in a production environment for the rapid, accurate and foolproof inspection of component parts during and after a production. There are certain basic rules which need to be followed to ensure adjustable limit snap gages perform to their expected accuracy and have a long operational life. 5-5/16" - 5-11/16" inch range and 135 - 144mm metric range.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-222-210-0

The Fowler EZ-Read steel digit micrometer has a choice of measurement range and a flat anvil/spindle pair for general purpose measuring. The digit display has 0.0001" graduation intervals and an accuracy of 0.0002" for precise readings. Carbide-tipped measuring faces provide wear resistance. A friction thimble provides smooth and quiet operations, and is suitable for one-handed operation. Friction-style thimbles stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The insulated steel frame helps reduce temperature-related expansion or contraction providing for accurate measurements. The micrometer includes a wrench and fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay type Digit Anvil/spindle style Flat Measuring range Varies Graduation Interval 0.0001" Accuracy 0.0002" Thimble style FrictionMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.What’s in the Box? Fowler Steel EZ-Read Outside Digit Micrometer Standard (for sizes 2" and above)Wrench Fitted case

Manufacturer: Fowler Brand: Fowler Model: Z-Height-E Jr.

Z-Height-E Jr. 6 /150mm Electronic Height Gage Features: Direct Inch/Metric Conversion Range: 6"/150mm Accuracy: .001 Resolution .0005 (.01mm) Large, high contrast LCD display Hold feature ABS/INC Measurement Floating zero Positive lock Carbide scriber

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 133-150

The Mitutoyo 133 series tubular vernier inside micrometer has a vernier scale in metric units for taking precise inside dimension (ID) measurements of the inside of cylinders, rings, and parallel surfaces. The micrometer head sleeve rotates to adjust the zero point to help provide accuracy. A locking clamp helps hold measurements in place. The vernier scale is graduated to 0.01mm, and has a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: TTC Brand: TTC

No. of Axis 2-Axis Travel|Decimal Inch 4" x 6"

Manufacturer: L.S. Starrett Brand: L.S. Starrett

681-50943 Features: -Advanced sleeve design with staggered lines and distinct figures for precise and easy readability. -Balanced frame and thimble design insure easy handling. -Ring-type knurled lock nut for quick and sure locking. -Smooth friction thimble for uniform pressure or the combination ratchet and speeder for uniform pressure and quicker adjustment, or a plain micrometer. Product Type: -Meters. Dimensions: Overall Product Weight: -0.5 Pounds.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 139-001

The Mitutoyo 139 series tubular vernier inside micrometer includes a set of extension pipes with anvils for a diversified range of measurement when measuring inside dimensions of cylinders, rings, and parallel surfaces. It has a vernier scale in inch units for taking precise inside dimension (ID) measurements to 0.01mm, and a satin chrome rust- and glare-resistant finish. The micrometer head has a travel of 25mm per revolution that helps provide quick positioning. The hollow, tubular extension pipes help provide light weight with rigidity. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-554-624-0

The Fowler Internal Electronic Caliper Gage measures inside dimensions (ID) with 0.0008"/0.02mm accuracy and.0005"/0.01mm resolution, and has a digital, single-value readout LCD, absolute and incremental modes, and RS-232 output. This caliper measures ID for hole diameters and groove and tube thicknesses. The digital, single-value readout LCD shows inch and metric units for versatility when measuring. The unit offers absolute and incremental modes for taking intermediate or differential measurements and stores a preset reference for comparing measurements. The caliper is spring-loaded in the measuring direction for a consistent measuring force and improved measurement repeatability. A thumb lever retracts the movable point. This caliper can output data via direct RS-232 for capturing and recording data. The caliper has a 2"/5cm diameter plastic electronic housing, steel arms, and hardened steel contact point for durability. The caliper uses a 3V CR2032 battery (included). It also comes with an aluminum case with foam inserts to cushion the instrument. Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements that are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Caliper gages are used in production settings where specific diametrical or thick...