Dimensional Measurement - Page 1058

Manufacturer: YPG Gages Brand: YPG Gages Model: U15X

Sound, structurally stable, design and specifications, coupled with a highly experienced, solid manufacturing and quality management system, guarantees YPG Adjustable Limit Snap gages supplied into the USA market are of the highest quality. gages can be 'Set, Sealed and Certified' to pre-determined Go/No Go sizes in YPG's accredited calibration laboratory. A fully stabilized cast iron frame forms the base of the 'U' type adjustable limit snap gage. The one piece, knife edge, rectangular anvil and the two knife edge, adjustable anvils are all manufactured from hardened, lapped, tool steel. The blades of the type 'U' make its primary use that of gauging the lower diameter of external grooves. Having only two adjustable anvils, the Go/No Go setting procedure is quick and straightforward. The blades are supplied with a standard thickness and depth, both of which can be modified by YPG to meet specific customer application requirements. Radius and chamfer changes can also be modified on request. In addition the 'U' type is very readily used as a more robust replacement for the "Reef" type gage. The Quality Management System operated by YPG is ISO 9001-2000 registered. This certification encompasses the entire organization and confirms the company's management system meets the required standard and in particular confirms the desire to exceed customer expectations and to be continually improving the products and services offered. All gages set at YPG are done in the company's state of the art, A2LA certified metrology laboratory. Product certification can be supplied on any gage calibrated or set in the laboratory. Adjustable Limit Snap Gages are precision gauging devices generally used in a production environment for the rapid, accurate and foolproof inspection of component parts during and after a production. There are certain basic rules which need to be followed to ensure adjustable limit snap gages perform to their expected accuracy and have a long operational life.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-401

The Mitutoyo Absolute Digimatic ID-C series inch/metric electronic indicator has a choice of measurement range and resolution, an 8mm stem diameter, and is designed for taking measurements in machining, layout, and inspection work. The LCD can be rotated 330 degrees for reading from a range of locations. The indicator can be set to zero at any spindle location at the time of powering on. Functions include preset, origin-set, zero-set, judgment, counting direction switching, data output, and inch/mm conversion. An audible alarm can be set to indicate low voltage, over-flow error, and tolerance limits. Statistical Process Control (SPC) data collection can be exported using an SPC cable (not included). The meter is powered with an SR44 battery (included).Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: MITUTOYO Brand: Mitutoyo

MITUTOYO TRI CLAMP MICROMETER MV 1 2 TESTED FOR 07/31/14 (LOC269) TS8

Manufacturer: GM280F Brand: eastmachinery

Description: 1.Specifications 0-1800um(+-(3%H+1)),resolution0.1um/1um Zeropoint,2point basic,3calibration Mode:single,continually,difference 2.Features: Measuring range: 0 to 1800µm; Accuracy:±(3%H+1); Automatic error correction system & Zero reset function; Resolution:0.1µm/1µm; Measure in imperial/Metric Hi-sensibility Sensor:for precise measurement Measuring mode:Single,Continually and Difference Data Analysis:Average,Maximum,Minimum,Standard Power: 3*1.5V battery(not included) Unit size:80*38*150mm

Manufacturer: INSIZE Brand: INSIZE Model: ISM-ZS50-EPD10X

Eyepiece, 10x Dividing eyepiece (0. 1mm/Div. ).

Manufacturer: INSIZE Brand: INSIZE Model: 3581-25E

Electronic screw thread micrometer, 0-1"/0-25mm.

Manufacturer: TTC Brand: TTC

No. of Axis 2-Axis Travel|Decimal Inch 6" x 20"

Manufacturer: iGaging Brand: iGaging

iGaging Professional Tools, SUPER Precision, IP65 Fluid & dust protection! Crisp, clear, easy-to-read LCD display, accurate to 0.00016". Hardened and ground spindle with carbide anvil ensure durability and accuracy. Comes in a padded case with adjustment wrench, instructions booklet and extra battery. Features: Traditional Standard Vernier analog scale on stem Digiatl Electronic Display with 2 measuring modes Metric/Standard IP65 Protection for water, Oil and Dust Large LCD Display Absolute & Incremental Modes Automatic Switch Off Accuracy +/- 0.00016" Range 0-1", 1-2", 2-3", 3-4"/0-25mm, 25-50mm, 50-75mm, 75-100mm Resolution 0.00005"/0.001mm Carbide Measuring Surfaces Exceeds USA Federal Accuracy Standards

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 506-208

The Mitutoyo 506-208 vernier height gauge is graduated for both inches and metric, and has a measurement range of 0” to 8”/200 mm, and is precise to .001”/0.02mm, with + or - 0.001”/0.03 mm of accuracy. It is compact and weighs approximately 3 lbs/1.4 kg, suitable for scribing while held against a vertical base or for measuring small objects in the field. The scriber, used to mark a position on a workpiece, is 47-mm long, carbide-tipped for hardness and to help prolong life, and is held to the gauge by a screw clamp for secure fastening. The grip-base helps hold the unit in position by hand. The slider and beam are made of stainless steel. It has a glare-free satin chrome finish that helps resist rust. A vernier scale provides precise measurement through a second sliding scale that indicates where measurement lies between marks on the main scale. A calibrated screw mechanism supports fine, uniform slider adjustments. Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: DeFelsko Corporation Brand: DeFelsko Model: STDA3

Certified coating thickness standards are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, Defelsko certified coating thickness standards have measured values traceable to a national metrology institution. Used to verify the accuracy and operation of any type 1 (mechanical) and type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage. Ideal for use in the calibration lab, in the field or on the factory floor. Standards with aluminum substrates consist of 4 plates mounted in a protective binder. Individually serialized for traceability to NIST or PTB - includes a certificate of calibration. Certified and labeled in both metric and imperial units. Defelsko A series epoxy on aluminum round metal plate. For PosiTector 100B, 200 and 200B. Approximate thickness: 75 micrometer / 3 mils for plate 1; 125 micrometer / 5 mils for plate 2; 250 micrometer / 10 mils for plate 3; 500 micrometer / 20 mils for plate 4. Coating/ substrate: Epoxy on aluminum (non-ferrous). Accuracy: +/- 0.43 micrometer, +/- 0.017 mil. Plate Diameter: 38mm (1.5"); Measurement Diameter: 25mm (1").