Dimensional Measurement - Page 1059

Manufacturer: Shimpo Brand: Shimpo Model: FGS-LENGTH-L

The Shimpo FGS-LENGTH-L digital length/height meter scale is for use with the Shimpo FGS-100H hand wheel test stand, and has a measurement range of 2" (50mm), a precision of 0.0005" (0.01mm), an accuracy of 0.001" (0.03mm), a high-contrast LCD readout that displays in inches or metric, and is constructed of stainless steel, aluminum, and plastic. The hold function freezes recordings on the display. The meter is powered by one SR44 1.5V battery (not included). The meter comes with installation instructions and a complete set of parts to attach the meter to the test stand.Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering.Shimpo Instruments manufactures force, torque, and speed evaluation instruments. The company, founded in 1974 and headquartered in Itasca, IL, meets International Organization for Standardization (ISO) standard 9001.What's in the Box?Shimpo FGS-LENGTH-L scale(3) BracketsThreaded pin(4) Cap screws(4) Small cross head screw(4) Large cross head screw(2) Spring washer(2) Flat washer(2) NutInstructions

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 526-127

The Mitutoyo 526-127 Dial Bore Gauge for Extra Small Holes has a measurement range of 10 to 18 mm. It is accurate to + or - 0.004 mm and precise to 0.01 mm. This direct-measuring gauge uses a split ball design to measure the inside diameter of holes and identify out-of-roundness problems with stainless steel contact points for high wear resistance. The gauge stem diameter is 8 mm.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 110-111

The Mitutoyo 110 series micrometer head has a differential screw movement and a vernier scale in inch units for taking precise, high-resolution measurements with a spindle travel of 0.01” per revolution for extra-fine adjustment. It has a clamp-nut stem for quick mounting of the micrometer in a fixture. The vernier scale is graduated to 0.0005”, 0.0002”, or 0.000005” depending on the model, and has a satin chrome rust- and glare-resistant finish. The spherical measuring face is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Flexbar Brand: Flexbar

Inside Dial Caliper Gages. Premium Quality. Made in Japan. Enables Precision Measurement of inner Diameters, Grooves, recesses, etc. inch Models: .0005" Graduation. Metric Models: 0,01mm Graduation. Model No. 18757, inside Dial Caliper Gage,001m Grad., 30-62mm Range.

Manufacturer: YPG Gages Brand: YPG Gages Model: C13X

Sound, structurally stable, design and specifications, coupled with a highly experienced, solid manufacturing and quality management system, guarantees YPG Adjustable Limit Snap gages supplied into the USA market are of the highest quality. Gages can be 'Set, Sealed and Certified' to pre-determined Go/No Go sizes in YPG's accredited calibration laboratory. A fully stabilized cast iron frame forms the base of the 'C' type adjustable limit snap gage. A one piece, rectangular anvil and two adjustable square anvils all manufactured from hardened, lapped, tool steel, form the base of the measuring gage. The large anvil gauging surfaces of the type 'C' ensures a long life and a consistently high level of measuring capability and repeatability. Additionally, having only two adjustable anvils, the Go/No Go setting procedure is quick and straightforward. The Quality Management System operated by YPG is ISO 9001-2000 registered. This certification encompasses the entire organization and confirms the company's management system meets the required standard and in particular confirms the desire to exceed customer expectations and to be continually improving the products and services offered. All gages set at YPG are done in the company's state of the art, A2LA certified metrology laboratory. Product certification can be supplied on any gage calibrated or set in the laboratory. Adjustable Limit Snap Gages are precision gauging devices generally used in a production environment for the rapid, accurate and foolproof inspection of component parts during and after a production. There are certain basic rules which need to be followed to ensure adjustable limit snap gages perform to their expected accuracy and have a long operational life. 8-1/8" - 8-5/8" inch range and 206 - 219mm metric range.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-742

The Mitutoyo Dial Bore Gauge provides measurement readings in inches. This direct-measuring gauge uses a two-point contact system to detect geometry problems such as ovality and taper, and carbide-tipped contact points provide extended wear and improved abrasion resistance.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Aven-Miruc Brand: Aven Model: MC-XTSC-90-5

These stages feature a feed screw design. You have a choice of 2, 5 or 10mm travel. Scales features 1mm increments with locking lever. These multi-function stages provide long travel at a fine pitch with smooth sliding action. They are ideal for a variety of positioning requirements that require high load capacities. Stage is made from an aluminum alloy treated with matte black aluminite. These stages can be combined in a variety of ways to provide a custom solution.

Manufacturer: Starrett Brand: Starrett Model: 690-3Z

The Starrett 690-3Z Hole Gauge Dial Bore Gauge has a measurement range of 0.130 to 0.230" and gradient spacing of 0.001". The gauge can be pressed down on a flat surface and checked so the size reads the same as the set number stamped on the back of the indicator. The balanced design makes for easy one-handed operation and all ground surfaces are made of hardened tool steel for durability.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.

Manufacturer: INSIZE Brand: INSIZE Model: 6313-0D079

Setting ring, 079 inch.

Manufacturer: Starrett Brand: Starrett Model: 824J

The Starrett 824 series fixed range vernier inside micrometer has an adjustable sleeve and adjustable contacts on the thimble end help provide accurate measurements, and a vernier scale in inch units for making precise measurements. A knurled thimble helps provide secure grip, and the handles are heat-insulated to help reduce temperature-related expansion or contraction. The vernier scale is graduated to 0.001” and a knurled ring-type lock nut holds measurements in place. The micrometer has a satin chrome rust- and glare-resistant finish.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.