Dimensional Measurement - Page 106

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 505-717 Color: White

The Mitutoyo 505 series dial caliper uses a combination of a vernier scale and a dial with a pointer that travels one rotation for each 0.2” measured to perform precise outside dimension (OD), inside dimension (ID), depth, and step measurements. The dial caliper has a fixed (main) scale and a movable dial, unlike the vernier caliper which has a second, movable vernier scale. The dial is circular and has a pointer; it is mounted on a toothed gear track which drives the pointer. As the dial moves over the main scale rule, the pointer rotates once to give the additional fractional reading. The second measurement is added to the main scale reading to obtain a final result accurate to the smallest graduation marked on the dial. The main scale and dial are marked in inches. The dial can be rotated beneath the pointer to measure size differential between two objects. The dial caliper is easier to read than the vernier caliper, thus safeguarding against user reading errors. Its standard of precise measurement complements the use of the vernier caliper; the dial provides an ease in reading and interpolating measurements which most vernier calipers, due to their need for direct observation of both scales, may not provide. The dial uses a rack-and-pinion mechanism and is mounted on a gear track where each tooth equals one quarter of the dial revolution, and four teeth equal 0.2”. The smooth-moving dial is graduated to 0.001” and offers gear train shock protection. A thumbwheel permits fast operation with one hand. A clamping screw controls scale movement and a dial calibration lock holds the sliding jaw’s position. The caliper is made of hardened stainless steel construction with titanium nitride (TiN) coating on the beam wear surface helps extend caliper life. Two sets of jaws provide four-way measurement capability: outside dimension (OD), inside dimension (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are m...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 150-802

The Mitutoyo 148 series middle-size micrometer head has a vernier scale in metric units for taking precise measurements to 25mm. It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The vernier scale is graduated to 0.01mm, 0.001mm, or 0.0001mm depending on the model, and has a satin chrome rust- and glare-resistant finish. The measuring face is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: ZFE Brand: ZFE

ZFE 1pc Metric Plug Thread Gage Gauge Size M10X0.5mm Product Name : Thread Plug Gage Class : 6H Thread Diameter: M10 Thread Pitch : 0.5mm Material : Steel Color : Black, Silver Tone Package Content : 1 x Thread Plug Gage

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's NPT Tapered Pipe Plug Gages are used to check tapered internal pipe threads. Perfect for inspecting standard pipe and pipe fittings.

Manufacturer: Bon Tool Brand: BON Model: 11-702

Laminated three piece walnut and maple construction. Reinforced with stainless steel rails. 100-Percent accurate glass vials

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-439-032-0

The Fowler 52-439-032-0 Premium ground 1-2-3 block set has a surface finish: 6-16μ" and hardness of 55-60 HRC. Accuracy of 0.0001"/1", 23 holes, 5 tapped, 18 untapped for easy clamping and set-up. Includes hex wrench and 5 mounting bolts 3/8" - 16. Includes a shop-hardened case for storage. . This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages and digital scales. The company founded in 1946, is headquartered in Newton, MA.

Manufacturer: Starrett Brand: Starrett Model: PT22431

The Starrett PT22431 depth attachment stabilizes the caliper while measuring the depth of grooves and bores. This attachment allows for perpendicular entry of the depth rod into a hole or groove, for accurate depth measurements. It attaches to the caliper by tightening a screw and removes easily when finished. Place the caliper vertically on a flat surface when tightening the screw to ensure the end of caliper and attachment are evenly lined up, for accuracy during measurement. Attachment is compatible with Starrett 6”, 9”, and 150 mm calipers.

Manufacturer: DEWALT Brand: DEWALT Model: DWHT43079 Color: Yellow

Value not found

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.