|
|
-
4.0 of 5.0 with 42 Reviews
SALE PRICE: $623.75
Manufacturer: Avongard
Brand: Avongard
Manufacturer: Avongard
Brand: Avongard
Monitors horizontal and vertical movement across a crack in a corner. The Tell-Tale is hinged enabling it to be used in internal corners of angles between 70 and 180 degrees. Monitors both internal and external corners. Avongard Tell-Tales are precision gauges that consist of two plates which overlap for a part of their length. The bottom plate is calibrated in millimeters and the top plate is transparent and marked with a hairline cursor in the form of a cross. Fix using Screws and Adhesive (not included but available as accessories). Supplied with full instructions and Crack Record Sheet.
-
4.0 of 5.0 with 21 Reviews
SALE PRICE: $641.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: S253Z
Manufacturer: Starrett
Brand: Starrett
Model: S253Z
The Starrett S253Z Dial Indicator Set with Jewel Bearing provides in one handy, compact kit three 25 Series Dial Indicators to handle most gaging jobs at a minimum cost. Sets are ideal for tool and die shops, machine shops and toolrooms having occasional work where a heavy investment in dial indicators would not be practical. Easy readability with the best, balanced style of graduation and number combination. Balanced and tapered hands are easy to follow.
-
4.0 of 5.0 with 37 Reviews
SALE PRICE: $668.00 22% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 368-269
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 368-269
|
The Mitutoyo 368 series Holtest vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in inch units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0001†or 0.0002†depending on the model. The measuring faces are carbide-tipped or TiN-coated for wear resistance depending on the model. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
4.0 of 5.0 with 43 Reviews
SALE PRICE: $674.03 4% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-513
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-513
|
The Mitutoyo 209 series Digimatic internal tube thickness caliper gauge has a combination analog/digital LCD display and large measuring depth for taking inside dimension (ID) measurements of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. Depending on the model, these units may come with either ball contact points suitable for measuring internal wall thickness of tubes, or disc contact points suitable for measuring flat surfaces. The calipers have an Ingress Protection 67 (IP67) rating, which ensures that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes. At minimum, functions include zero-set, preset, automatic power off, inch/metric, and conversion data hold. An output port transmits results to a Mitutoyo miniprocessor or computer for statistical process control (SPC) through an interface cable (sold separately). The unit comes with, and is powered by, a single AA battery that lasts approximately 350 hours with continuous normal use. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the m...
-
4.0 of 5.0 with 34 Reviews
SALE PRICE: $695.00
Manufacturer: DeFelsko
Brand: DeFelsko
Manufacturer: DeFelsko
Brand: DeFelsko
The Spare Probe for PosiTector 6000 N90S Coating Thickness Gauge ( Single Probe ) is a replacement probe for PosiTector 6000. This single probe is supplied with a NIST Traceable calibration certificate.
-
4.0 of 5.0 with 25 Reviews
SALE PRICE: $705.00 9% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-558A
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-558A
|
Mitutoyo 543-558A IDF Digimatic Indicator with six user-selectable resolutions of 0.00005, 0.0001, 0.0005, or 0.001â€, and 0.001 or 0.01 mm, an accuracy of + or - 0.00012†(0.003 mm), a total measurement range of 0-2†(0-50.8 mm), and can be set to zero at any spindle position for measuring in either or both directions (plus or minus). The LCD display has a sealed housing that meets Ingress Protection Rating 30 (IP30) standards for dust and water protection, a 3/8†diameter stem, a steel ball contact point, and a flat back. The indicator displays maximum and minimum read hold, changes color from green to red when user-defined tolerances are exceeded, and has total indicator reading (TIR) capability that displays the absolute difference between the highest and lowest readings. A backup memory function retains user-defined setup conditions when power is interrupted, and an alarm indicates overflow errors, tolerance limit setting errors, and scale contamination. The indicator has SPC data output features that allow for data analysis, and choice of two power sources (AC or 9V battery). Dial indicators may also be called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Standard dial indicators measure the displacement along the axis of the indicator. Dial indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recordin...
-
4.0 of 5.0 with 46 Reviews
SALE PRICE: $714.70
Manufacturer: INSIZE
Brand: INSIZE
Model: 1151-300
Manufacturer: INSIZE
Brand: INSIZE
Model: 1151-300
Electronic Height gage, 0-12"/0-300mm.
-
4.0 of 5.0 with 13 Reviews
SALE PRICE: $752.96 1% OFF
Manufacturer: Checkline
Brand: Checkline
Manufacturer: Checkline
Brand: Checkline
|
Measures and records climatic parameters including: Relative humidity, air temperature, surface temperature, dew point temperature and difference between surface and dew point temperatures. Ideal for surface preparation as required by ISO 8502-4 , BS 7079-B4, ASTM D3276-05 , NSTM 009-32 , IMO PSPC , and SSPC-PA7.  Simple Large, easy-to-read, graphics LCD with multilingual support Enhanced one-handed menu navigation No need to consult complex tables or use a slide rule calculator Audio and visual alarm - indicates when climate conditions are unsuitable for painting All readings are constantly updated and displayed simultaneously RESET feature instantly restores factory settings Durable Rugged, outdoor/indoor instrument Solvent, acid, oil, water and dust resistant - meets or exceeds IP5X Shock-absorbing protective rubber holster with belt clip and wrist strap Two (2) year warranty on both body and sensors Accurate Fast response precision sensors provide accurate, repeatable readings with high reliability and long term stability Smart Trend IndicatorsTM identify rising, falling or stable readings Certificate of Calibration showing traceability to NIST included Conforms to national and international standards including ISO 8502-4, BS 7079-B4, ASTM D3276-05, NSTM 009-32, IMO PSPC, and SSPC-PA7 Versatile Internal Memory stores datasets with the simple touch of a button Auto Log Mode automatically records 5 parameters at user selected time intervals. Ideal for unattended operation. Field calibratable Celsius/Fahrenheit switchable Selectable display languages Hi Contrast backlit display for bright or dark environments Flip display enables right-side-up viewing Uses alkaline or rechargeable batteries (built-in charger) Powerful Universal body accepts all PosiTector DPM (environmental), 6000 (coating thickness) and SPG (surface profile) probes Hold function freezes the display allowing measurements to be manually recorded USB port for fast, simple connection to a PC and to su
-
4.0 of 5.0 with 27 Reviews
SALE PRICE: $773.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 685M-3Z
Manufacturer: Starrett
Brand: Starrett
Model: 685M-3Z
These gauges directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gauge should read the set number stamped on the back of the indicator. In case of wear, the gauge may be adjusted to read the proper number.
-
4.0 of 5.0 with 15 Reviews
SALE PRICE: $808.42 7% OFF
Manufacturer: Bosch
Brand: Bosch
Model: GSL 2
Manufacturer: Bosch
Brand: Bosch
Model: GSL 2
Viewing Page 1067 of 1520
|
|