Dimensional Measurement - Page 1069

Manufacturer: Flexbar Brand: Flexbar

A versatile Measurement System for internal pitch Diameters, as well as internal bores, Grooves, recesses and internal gears. Major Features: Major breakthrough in utilizing computer Software With a Measuring instrument. With this new concept, accurate Measurements of internal Threads and compensation calculations for Ball Diameter variations or lead Angles are Made extremely simple. The Software diskettes supplied With the IPD Gage Can be used in any IBM compatible PC to obtain All data required for accurate inspection of any specific internal Thread Without the necessity of a master Gage. Easy to Set IPD Gage With Micrometer or Gage Blocks, etc. Universal, Can be used as general purpose internal Gage for Measuring bores, Grooves and pitch Diameters of Screw Threads and internal gears, etc. indicator alone, With the included Adapter, Extensions and contact Points, make it possible to Measure internal Threads and bores from 7+" to 18". Precision Made in U.S.A. Rigid construction Plus Special High Precision pivot bearings assure repeatability of .0002" or less. Balanced Body design for easy and convenient handling. Adjustable contact pressure. Carbide Ball contact Points are optional, Not included. System includes internal Gage, 1" Travel indicator, indicator-Adapter, 8 Extensions (1/4", 3/8", 1/2", 3/4", 1", 2", 3" and 4" Long), Measuring Tip organizer, 2 Standard contact Points 1/4" Long, Allen Wrench, fitted Case Plus Software casSette for internal pitch Diameter Threads and instruction manual. Specifications: Measuring Range: Bores- .93" to 8" Nominal Size Threads- 1 1/8" to 8" Extended Range With included indicator Adapter- 7 1/2" to 18" Gage Arm Travel - .625" Maximum reach in 1-1/4" Dia. bore- 4.8" 1" Travel indicator Graduation- .0005" The IPD Software complies With ANSI Standards; fully compensates for the effects of lead Angle. On screen explanation, No commands to remember. Error free data entry, will detect invalid input data.

Manufacturer: DeFelsko Corporation Brand: DeFelsko Model: SPG3-E

Come Complete with glass zero plate, metal shim, protective rubber holster with belt clip, wrist strap, 3 AAA alkaline batteries, instructions, nylon carrying case with shoulder strap, protective lens shield, Long Form Certificate of Calibration traceable to NIST, USB cable, 2 year warranty. Durable, solvent, acid, oil, water and dust resistant - weatherproof. 60 Degree angle tungsten carbide tip for long life and continuous accuracy - field replaceable. Rugged, outdoor/indoor instrument - ideal for field or shop use. Shock-absorbing, protective rubber holster with belt clip. Two year warranty on body and probe. Accurate, built-in temperature compensation ensures measurement accuracy. Certificate of Calibration showing traceability to NIST included. Glass zero plate and metal shim included. Conforms to national and international standards including ISO and ASTM. Versatile, universal gage body accepts ALL PosiTector SPG, DPM and 6000 probes. 30 Degree angle interchangeable probe tip available for special applications. Selectable display languages. Hi Contrast backlit display for bright or dark environments. Flip display enables right-side-up viewing. Uses alkaline or rechargeable batteries (built-in charger). Powerful, continually displays/updates average, standard deviation, min/max thickness and number of readings. HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits. Every stored measurement is date and time stamped. USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. USB mass storage - stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Software updates via web keep your gage current. Range: 0 - 500 micrometer (0 - 20 mils). Accuracy: +/- (5 micrometer + 5 percent), +/- (0.2 mil + 5 percent). Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30 degree tip angle), U.S. Navy NSI 009-32, SANS 5772 and others.

Manufacturer: Electron Microscopy Sciences Brand: Electron Microscopy Sciences

Dual axis linear micrometer to accurately calibrate in X & Y directions w/o rotation. For optical magnification and camera aspect ratio using single standard. Use to calibrate and check linear stage motion. Calibrated.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 514-105

The Mitutoyo 514-105 vernier height gauge has a measurement range of 0” - 18"/0 - 450 mm, and is graduated in both inches and metric to 0.001”/0.02 mm, with + or – 0.002”/0.05 mm of accuracy. The scriber, used to mark a position on a workpiece, is 32 mm x 80 mm (H x W), carbide-tipped for hardness and to help prolong life, and is held to the gauge by a screw clamp for secure fastening. The grip-base helps hold the unit in position by hand. An adjustable beam with a ring-type lock nut supports repositioning of the zero reference point for manual change of the base position. The slider and beam are made of hardened stainless steel, with a glare-free satin chrome finish that helps resist rust. The height gauge weighs 7.5 lbs/3.4 kg. A vernier scale provides precise measurement through a second sliding scale that indicates where measurement lies between marks on the main scale. A calibrated screw mechanism supports fine, uniform slider adjustments. Height gauges, also called gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 526-150

The Mitutoyo 526-150 Dial Bore Gauge for Extra Small Holes has a measurement range of 3.7 to 7.3 mm and is accurate to + or - 0.004 mm. This direct-measuring gauge uses a split ball design to measure the inside diameter of holes and identify out-of-roundness problems with stainless steel contact points for high wear resistance. The gauge stem diameter is 8 mm and the probe depth is 32 mm. This gauge is for use with Mitutoyo dial indicators (sold separately).Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL. What's in the Box?Mitutoyo 526-150 bore gauge(7) anvils32 mm needle

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 339-304

The Mitutoyo Digimatic tubular LCD inside micrometer includes a set of hollow, tubular extension pipes to help provide light weight with rigidity and balance shoulderswhen measuring inside dimensions of cylinders, rings, and parallel surfaces. It has a single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm), and Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The measuring faces are carbide-tipped for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a wooden case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America C...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 339-303

The Mitutoyo Digimatic tubular LCD inside micrometer includes a set of hollow, tubular extension pipes to help provide light weight with rigidity and balance shoulderswhen measuring inside dimensions of cylinders, rings, and parallel surfaces. It has a single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm), and Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The measuring faces are carbide-tipped for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a wooden case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America C...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 514-106

The Mitutoyo 514-106 vernier height gauge has a measurement range of 0 - 600 mm, and is graduated to 0.02 mm, with + or - 0.05 mm of accuracy. The scriber, used to mark a position on a workpiece, is 32 mm x 80 mm (H x W), carbide-tipped for hardness and to help prolong life, and is held to the gauge by a screw clamp for secure fastening. The grip-base helps hold the unit in position by hand. An adjustable beam with a ring-type lock nut supports repositioning of the zero reference point for manual change of the base position. The slider and beam are made of hardened stainless steel, with a glare-free satin chrome finish that helps resist rust. The height gauge weighs 16.31 lbs/7.4 kg. A vernier scale provides precise measurement through a second sliding scale that indicates where measurement lies between marks on the main scale. A calibrated screw mechanism supports fine, uniform slider adjustments. Height gauges, also called gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: DeFelsko Corporation Brand: DeFelsko Model: 200D3-E

Defelsko The PosiTector 200 non-destructively measures a wide variety of applications using proven ultrasound technology. Measures coating thickness over wood, concrete, plastics, composites, metals and more. Advanced models measure up to 3 individual layer thicknesses in a multi-layer system and features a graphic readout for detailed analysis of the coating system. Ready to measure, no adjustment required to measure most coatings. Enhanced one handed menu navigation. Flashing display, ideal for noisy environment. Reset feature instantly restores factory settings. Solvent, acid, oil, water and dust resistant, weatherproof. Shock-absorbing, protective rubber holster with belt clip. Two year warranty on body and probe. Certificate of Calibration (long form) showing traceability to NIST included. Responsive transducers provide fast, accurate readings. Proven non-destructive ultrasonic technique conforms to ASTM D6132 and ISO 2808. Universal gage body accepts all PosiTector 200, 6000, DPM, SPG, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage or wall thickness gage. Hi Contrast backlit display for bright or dark environments. Mils/Microns switchable. Selectable display languages. Flip display enables right-side-up viewing. Uses alkaline or rechargeable batteries (built-in charger). Statistics - continually displays/updates average, standard deviation, min/max thickness and number of thickness readings. USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft solutions for viewing, analyzing & reporting data: PosiSoft USB Drive - stored readings and graphs can be accessed using universal PC/ Mac web browsers or file explorers. No software required. PosiSoft Software - Continue using the familiar desktop software you have used for years.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 570-248

The Mitutoyo 570-248 LCD Absolute Digimatic height gauge has a measurement range of 0” - 40”/1000 mm, a high-contrast LCD digital readout precise to 0.0005”/0.01 mm, with + or - 0.003”/0.07 mm of accuracy, and data output to transmit results to a Mitutoyo miniprocessor or computer for statistical process control (SPC). This height gauge has an electronic microprocessor providing the ability to preset a reference height at any position, as well as set a temporary zero position and return to a true zero reading. The LCD display is selectable to display either inch or metric units. The output port transmits results to a Mitutoyo miniprocessor or computer through an interface cable (not included) for statistical process control (SPC). An electrostatic capacitance linear encoder helps prevents overspeed errors to help ensure repeatable, precise measurement. The scriber, used to mark a position on a workpiece, is 25 mm x 47 mm (H x W), carbide-tipped for hardness and to help prolong life, and is held to the gauge by a screw clamp for fastening ease. A calibrated screw mechanism supports fine, uniform slider adjustments. The grip-base helps hold the unit in position by hand. The height gauge weighs 37.04 lbs/16.8 kg. The unit comes with an SR44 battery. Height gauges, also called gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machi...