Dimensional Measurement - Page 1116

Manufacturer: ADJUSTOL Brand: ADJUSTOL

ADJUSTOL Adjustol Holders - Model: 178B

Manufacturer: Bon Tool Brand: Stabila Model: 41024

The Stabila R-BEAM Type-300 aluminum level is ideal for use on heavy-duty jobsites. It features a special R-shaped beam profile that increases its strength to over twice that of other level models. This Stabila level's profile makes it ergonomic and more comfortable to hold while you transport it or take measurements. The vials are locked in so you can use the level right out of the box and never need to recalibrate. This aluminum level weighs just two pounds for easy transport. Two rubber end caps protect it from damage due to falls or impacts. The end caps also grip walls to prevent slips and feature a non-marring design.

Manufacturer: Stabila, Inc. Brand: Stabila Color: Yellow, Red

Stabila's 37416 - 16" builder's level is one of the new "best of the best" professional levels. As the industry leader, Stabila has improved on the "world's best level" with the new type 196 series. This level has a wider profile which means an even stronger frame. The accuracy is certified, top and bottom readings and sports a new rubber hand grip design. Rubber pad end caps and wall grips that are functional yet removable for flush measuring. FEATURES • Crystal clear vials readable in any direction with no change in accuracy tolerance. • Spring steel hairline indicators in vials. • Locked vial system, no recalibration needed • Removable rubber end caps for scribing in corners and for reading tight header and sill openings. • Rubber end caps grip walls and do not leave marks. • Metal Hang hole for storing level on site. • Two rubberized hand holds for comfort and grip (16" version has one hand grip) • 59" and longer have a bridge over the vial for increased strength as well as providing an uninterupted surface for both drawing and scribing over the horizontal vial • Vials accuracy is guaranteed for life • One Horizontal (level) and Two Vertical (plumb) Vials (16" version has one Horizontal and one Vertical vial) Bundle Includes: • Stabila 37416 16" Heavy Duty Professional Type 196 Builders Level • Stabila 30059 59-Inch Padded Nylon Case for Jamber & Torpedo Construction Levels

Manufacturer: AdirPro Brand: AdirPro Model: 720-11 Color: Red, White, Black

The AdirPro Mini Prism System with Pin Pole 720-11 features a 25 mm silver-coated prism with a 0 mm offset attached to a holder that slides up and down the included pin pole. The .48 Inches (12.2 mm) diameter pin pole has 3.94 Inch (10 cm) long red and white sections that make up three adjustable sections for a total height of 5.91 Feet (71 Inches - 1.8 meters). These adjustable sections can be fully secured with the knob lock, which also includes a built-in level vial with 40-minute sensitivity. The AdirPro Mini Prism Pole System comes with a replaceable stainless steel point for the pole, an accessory kit with a plumb bob hook, a cone for attachment to the prism, and a carrying case.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2417S Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Starrett Brand: Starrett Model: 3206

The Starrett 3206 stand converts outside micrometers to a sturdy bench gage for batch inspection of small parts. Useful as a handy bench vise or assembly fixture.

Manufacturer: INSIZE Brand: INSIZE Model: 2842-N1

Standard probe for 3D tester, 1.063 inch.

Manufacturer: Merlintools Brand: Merlintools

metric M42 x 1.0mm set thread ring gage.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: P101-S100

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.