Dimensional Measurement - Page 1120

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-236-005-1

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Meda - Superior Import Brand: Meda - Superior Import

* Designed for quick and accurate centering of a work piece or fixture. * Operates at any angle. * Use on vertical and horizontal machines * Use for internal and external diameters. * While spindle rotates, the centering indicator remains stationary and always faces the operator Supplied complete with indicator restraining rod, center point feeler, 4 straight feeler, 8 straight feeler, 12 straight feeler, 4 curved feeler, 8 curved feeler, 12 curved feeler, fitted case. SPECIFICATIONS: Length: 6-7/8 Shank: 3/8dia. x 7/8 long Probe ball: 1/8 diameter Measuring range: .250 axis offset Capacity: Internal: 5/32 to 4-1/4 dia. External: 0 - 4-1/4 dia. Speed: Not exceed 800RPM Approx. Locating accuracy: To within 0.00025 of true center Graduation: 0.0005

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-243-212-1

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: INSIZE Brand: INSIZE Model: 6313-9H32

Setting ring, 9/32 inch dia.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: White

The Brown & Sharpe TESA Tesatast series dial test indicator has a white face, a 0.0787" stem diameter, and inch measurements. The indicator can make either horizontal or vertical measurements, and the choice of white or yellow dial help make measurements easy to read. The yellow face with contrasting black hand complies with ANSI standards for metric dial faces. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face mounted on the side of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes an identification number and a declaration of conformity. The set includes a dial test indicator, a 0.080" (2mm) ball-end carbide contact point, a 0.310"(8mm) extension with dovetail, a point key, a Certificate of Accuracy and Traceability, and a storage box. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 7237CAL

The calibrated Mitutoyo 7237CAL dial depth gauge is for measuring the depth of holes or other depressions. This gauge has a measurement range of 0 to 8.0", graduations of 0.001", and an accuracy of + or - 0.002". The dial indicator is a back plunger type for reading from above with a white face for precise and readable measurements in inches. This item comes with a carbide-tipped ball contact point and four extension rods (0.5", 1", 2", and 4") for flexibility in measuring range. The base of this model is 4 x 0.63 inches (W x D) for stability. (W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.This gauge has a measuring force of 1.4 Newtons (N) or less. SpecificationsRange0 to 8.0"Graduations0.001"Accuracy+ or - 0.002"FaceDial with white face displays in inches, horizontal indicatorPointsBall shaped, carbide-tipped contact pointExtension rodsFour (0.5", 1", 2", and 4")Stroke0.2"Measuring forceLess than 1.4NDimensions64mm height, 39.6mm face diameterBase dimensions4 x 0.63 inches (W x D)Shipping weight200gW is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recess...

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4400-0023

Swiss Style Test Indicator and Magnetic Indicator Holder ~ The indicator is a horizontal dia test indicator. ~ This indicator has a 080" Tungsten Carbide point. ~ Automatic reversal dial indicator with a dial diameter 1-1/2". ~ Jeweled movement. ~ 210 degree swivel arc. ~ The dial reading is 0-15-0. ~ The range: 0-.060" and the graduation is .0005". ~ The dial is an easy to read tilted dial. ~ The indicator holder has 80 lbs. magnetic pull. ~ The overall height is 5". ~ There is a find adjustment knob and it holds most dial and test indicators. ~ The stem holds 3/8, 5/16, and 1/4" diameter stems.

Manufacturer: NEMCO FOOD EQUIPMENT Brand: Nemco Food Equipment Model: 224-1298 Color: Unknown

Portable Base Allows mobility for food cutters instead of mounting

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's NPTF Tapered Pipe Plug Gages are used to check tapered internal pipe threads. Perfect for inspecting standard pipe and pipe fittings.

Manufacturer: Meda - Superior Import Brand: MEDA - SUPERIOR IMPORT

Micrometer Features: *5 keys Positive-designed electronic micrometer *Large and clear LCD. *Absolute and incremental conversion *Friction thimble *Data hold and tolerance set *SPC output *.00005"/.001mm Caliper Features: *Rugged construction of stainless steel with no rack, no pinion, and no glass scale *5 Digit high contrast display *Inch/Metric switch *Floating "Zero" reference point *Resolution +/- .0005"/0.01mm *Accuracy .001" *SPC Output *Four Way Measurement *Includes: fitted case / battery