|
|
-
3.9 of 5.0 with 17 Reviews
SALE PRICE: $124.99 17% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-440-777-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-440-777-0
|
The Fowler 52-440-777 Universal Dial Protractor, made of hardened stainless steel with a 
satin chrome finish, comes with 6" and 12" blades, an acute angle attachment, and fitted wooden case. The dial has a cutout window for degrees, with two colors and clock-style hand to facilitate reading, and has 12 divisions for each degree to measure intervals of 5 minutes. Blades are beveled 45° on one end and 60° on the other for fitting in tight spaces. The protractor has a positive locking lever. Applications include measuring angles in machines, metal molds, and jigs. Protractors are tools that measure specific angles, which allow users to create and replicate desired angles. The tools include a stationary base and movable rule, usually connected by a scale that may be digital or manual. They are useful in a wide range of applications, such as measuring crown molding and installing baseboards. A protractor can be included as part of a combination set, along with a center and a square. A center accurately locates the center of a circle or cylindrical rod. A square is used to scribe right angles and parallel lines, calibrate miter and table saws, or as a miter, height gauge, or depth gauge. The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.
-
3.9 of 5.0 with 43 Reviews
SALE PRICE: $125.00
Manufacturer: BEA Laser
Brand: BEA Lasers
Manufacturer: BEA Laser
Brand: BEA Lasers
The GPL 105 GHL laser diode module system is best suited for general purpose, medium-duty applications. Intended for education, light assembly and simple alignment jobs, the system includes a 3/8" NPT threaded housing with mounting hardware and plug-in USB type power supply. Cord connector length is 36" and available patterns are green dot or line with a nominal focal length of 17". This module may be powered by the USB port on any computer as an option. The housing is CRS and plated with a clear zinc oxide. This product is not intended for wet, high vibration or harsh environment applications.
-
3.9 of 5.0 with 15 Reviews
SALE PRICE: $128.97 40% OFF
Manufacturer: ZFE
Brand: ZFE
Manufacturer: ZFE
Brand: ZFE
ZFE 1Pc 1/2"-28 Unified USA Standard Plug Thread Gage Gauge Steel hex handle Used for gaging internal thread. Double end, steel material. Go/no go design. Convenient to measure with hex handle. Ideal measuring tool. Used widely in car, motor, machinery, etc.
-
3.9 of 5.0 with 8 Reviews
SALE PRICE: $129.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 1670SB
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 1670SB
Color: White
|
The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...
-
3.9 of 5.0 with 24 Reviews
SALE PRICE: $130.00 1% OFF
Manufacturer: Linsen Tool Co.,LTD
Brand: Linsen
Manufacturer: Linsen Tool Co.,LTD
Brand: Linsen
Each set of M65 x 3 thread plug gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO.We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.
-
3.9 of 5.0 with 31 Reviews
SALE PRICE: $132.00
Manufacturer: Q-Mark Manufacturing Inc
Brand: Q-Mark
Manufacturer: Q-Mark Manufacturing Inc
Brand: Q-Mark
M2 stylus, 0.3 mm carbide ball, stepped carbide shaft, 3.0 mm diameter x 5.0 mm long stainless steel base, 18.0 mm overall stylus length. Major shaft diameter is 1.0 mm. Intermediate shaft diameter is 0.50 mm. Minor shaft diameter is 0.20 mm. Stylus weight is 0.33 gram.
-
3.9 of 5.0 with 38 Reviews
SALE PRICE: $133.35 18% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2923S-10
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2923S-10
Color: White
|
The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...
-
3.9 of 5.0 with 46 Reviews
SALE PRICE: $134.00
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Premium Quality Precision Dial indicators - AGD 2. Made in Japan Features Extremely Smooth Precision Gears inch and Metric Models. Other Features: Contact Point Made of tool steel, Hardened ground and chrome plated. Stem Made of stainless steel
-
3.9 of 5.0 with 31 Reviews
SALE PRICE: $135.00
Manufacturer: G.A.L. Gauge Co.
Brand: G.A.L. Gauge Co.
Manufacturer: G.A.L. Gauge Co.
Brand: G.A.L. Gauge Co.
The G.A.L. Gauge Co. Skew-T Fillet Weld Gauge with Calculator GAL-9c, Metric Measurement Scale is used for Checking Angle of Vertical Member, Weld Acute Side and Weld Obtuse Side
-
3.9 of 5.0 with 30 Reviews
SALE PRICE: $135.00 20% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 1803SB-10
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 1803SB-10
Color: White
|
The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...
Viewing Page 1123 of 1520
|
|