Dimensional Measurement - Page 1135

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 323-250

The Mitutoyo 323 series LCD disk micrometer has disc-shaped measuring faces with flanges for measuring the pitch of gear teeth. It also has a ratchet-stop mechanism for uniform adjustment, a non-rotating spindle that helps provide steady positioning during measurement, an LCD digital readout that displays in metric units with resolution to 0.001mm for outside diameter (OD) measurement, and Statistical Process Control (SPC) data output to transmit results to a computer or external device. The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The output jack transmits SPC results to a computer through an interface cable (sold separately). The micrometer has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The frame is made of high-grade tool steel. The unit comes with an SR44 battery and a fitted plastic case. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL...

Manufacturer: Flexbar Brand: Flexbar

Flexbar True-Bore 3-Point Bore Gaging System. Specifications For Ordering Handles, Gage Heads . True-Bore Is The Result Of Over 25 Years Of Design And Manufacture Of 3-Point Bore Gaging Systems. Ideal For Solving Internal Diameter Measurement Problems On The Shop Floor And Inspection Areas, The System Is Available In A Large Measuring Range For Specific Applications. Mechanical And Electronic Dial Gages As Well As Linear Probes Can Be Used As Specified. Main Features: True-Bore Heads Have A Large Measuring Range And Are Supplied With Fixed Anvils Eliminating Operator Error. 24 Heads Cover .236"-7.87" (6-200mm Range). Unique System Design Allows Two Measuring Handles Or New Pistol Grip Triga-BoreTM To Cover .236"-7.87" (6-200mm Range). Extensions Available For Increased Gaging Depths. Repeatability: .0001"/0,002mm. High Degree Of Accuracy Can Be Achieved Without Need For Special Skills. Customer Can Specify Type Of Output. Ideally Suited To Simple Or Integrated Measurement Applications. Can Be Used For Special Applications Such As Threads 'O' Ring Grooves, Spherical Forms, Etc. Ergonomically Designed Handle Offers Single Handed Operation. Accurate Calibration And Linearity Checks Can Also Be Made Using Flexbar's True-Cal System. Model No. 20319, 3-Point Bore Gage Heads, Head Size 1.260-1.575"

Manufacturer: L.S. Starrett Brand: Starrett

Technical Specification Item Dial Bore Gage Measuring Range (In.) 1.4 to 2.4 Probe Depth (In.) 6.00 Graduations 0.0005 Number of Leaves 11 Length (In.) 4 Dial Reading 0-50-0 Measuring Range (In./mm) 1.4 to 2.4 Includes Case This listing is for each.

Manufacturer: Newtry Brand: Newtry

Usually the product should take about 6--13 business days to arrive your hand after your payment is confirmed Major performances LX-F type sponge durometer is suitable for the determination for soft foam, polyurethane foma rubber products' hardness. And it will be different with the other hardness tester. In the aspects of using. When using, the presser foot directly contact to the sample, and see its own weight as force measurement load. Technical Parameter Types: Type F Calibration Value:0-100HD Pressure Head Size:Φ2.5 mm End pressure of Pressure Head:0-44.5 N Pressure Needle Range:0-2.5 mm Dimension:108*60*80mm Attention:  we will send the product to you as soon as possible  If you have any questions , please feel free to contact us 

Manufacturer: Mitutoyo Brand: Mitutoyo

' Dial Bore Gage, Measuring Range (In.) 2 to 6, Probe Depth (In.) 6, 0.0001 In Graduations, Dial Reading 0-5-0, Standard Head Type, Carbide Measuring Faces, Includes Fitted case '

Manufacturer: iGaging Brand: iGaging Model: 35-700-H24

Igaging 24"/0.0005" digital height gauge W/absolute origin Super high accuracy high gage. Uses absolute technology that Memorize the zero origin. Accuracy can be increased with the use of engaging electronic probe/indicator (0.5" search: 35-950-12, 1.0" search: 35-950-25, 2.0" search: 35-950-50, 4.0" search: 35-950-99). the probe can connect with included cable to the height gauge for cumulative measurement. Features: connect and interact with igaging absolute digital indicator probes (35-950-xx) to increase the accuracy of the height gauge to 0.0002"-0.0004" large easy to read LCD display absolute technology that Memorize origin zero resolution: 0.0005"/0.01mm accuracy: 0.0025" indication variability: 0.0005"/0.01mm SPC/USB data port Carbide tipped scriber ABS/Inc. measurement includes indicator/probe holder height Gauge can use AC power with included cable.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 547-512

Mitutoyo 547-512 IDS Digimatic Thickness Gage, Lens Thickness Reverse Anvil, 0-0.47"/0-12mm Range, 0.0005"/0.01mm Resolution, +/-0.001" Accuracy

Manufacturer: SMART SENSOR Brand: Smart Sensor

Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Specifications: Trandsducer: φ6 mm 5MHZ/φ10mm 5MHZ Measurement Range: 1.0-300.0mm (Steel) Accuracy: ±(1%H±0.1mm) Resolution: 0.1mm Sound velocity:1000~9999m/s Operating Frequency:5MHZ Operating Condition: 0℃~40℃ Minimum limit for tube measuring: φ15*2mm(steel)( φ6)/ φ20*3mm(steel) ( φ10) Thickness data storage:12 groups Sound Velocity Measuring&Storage: 12 groups ---- Automatic Zero Calibration/Auto linear compensation/Coupling indicator ---- Backlight Display/ Auto/Manual Power Off/ Battery Indication --- Max/Min Thickness Alarm Setup/12 Sound Velocities For Diff. Material

Manufacturer: Dakota Ultrasonics Brand: Dakota Ultrasonics

The T-042-1000 Hiigh Temperature Dual Element Transducer, 2.25 MHz, 1/4" Diameter is a transducer that features 1/4" diameter, 2.25 MHz dual element transducer. High Temperature (650F / 343C), potted cable, top in.

Manufacturer: Dakota Ultrasonics Brand: Dakota Ultrasonics

The T-042-2700 Alpha-Hi Damped High Temperature Dual Element Transducer, 1/4" Diameter, 5.00 MHz is a 5.00 MHz dual element transducer for TI-25M/DL/MMX. Alpha-Hi Damped High Temperature (650F / 343C), potted cable, top in