Dimensional Measurement - Page 1136

Manufacturer: Starrett Brand: Starrett Model: 823MBZ

These micrometers are highly useful tools for internal linear measurements such as measuring cylinders, rings, setting calipers, comparing gauges and measuring parallel surfaces. The extension rods are made of steel tubing, light in weight, yet extremely rigid. Rods are approximately 9.5mm diameter to meet the requirements of mechanics who prefer this larger diameter. By removing the hardened and ground anvil ends (end caps) of the micrometer head, the rods may be attached to either or both ends of the micrometer as preferred. Each rod may be individually adjusted for wear by the hardened and ground anvil at the end. Tubular measuring rods are lightweight, yet extremely rigid. Rods are insulated, with the exception of 13mm and 25mm sizes also each rod is marked with length. Movement of screw: 13mm.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 62.90051

The Brown & Sharpe Micromaster Alesometer  LCD inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of through holes, blind bores, or short centering shoulders, and a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm). It also has Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 54 (IP54) rating, which means that components are resistant to debris and to splashing water from any direction up to a volume of 10 liters per minute. The measuring faces are made of hardened steel and may be uncoated, or tungsten carbide-tipped for wear resistance, depending on the model. The micrometer includes, and is powered by, a single CR2032 lithium cell battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role i...

Manufacturer: Vetus Brand: eastong

ETC-098 Ultrasonic Thickness Gauge uses the ultrasonic measuring principle, applicable to enable ultrasonic at a constant speed in its internal communication, and can measure the thickness of various materials to be reflected back to the, can be used for accurate measurement of various materials and various kinds of machining parts, but also on the production equipment of all kinds of piping and pressure vessel monitoring, widely used in various petroleum, chemical, metallurgy, shipbuilding, aviation, aerospace and other fields. Technical Specifications Range: 0.75-300.0mm(determined by probe) Accuracy: ±(1%H+0.1)mm Lower limit of pipe (steel): φ20mm×3.0mm(5MHz); φ15mm×2.0mm(10MHz) Sound velocity range: 1000m/s-9999m/s To measure velocity by thickness: Range: 1000m/s-9999m/s Thickness of the measured sample: ≥20mm(Accuracy: ±5%) Temperature: 0°C-40°C Power supply: DC1.5V×2 (Not Included) Dimensions: 150mm×73mm×32mm Weight: 400g Color: Blue Basic delivery Carrying case...............1pc Main unit......................1pc 5 MHz probe................1pc

Manufacturer: Starrett Brand: Starrett Model: 124CZ

These are the most popular inside micrometers because of their lightness, ease of use, and range. They are very useful for measuring inside diameters of cylinders and rings, measuring parallel surfaces, etc. The desired range is obtained by assembling rods and spacing collars to the micrometer head. Measuring rods are provided with a shoulder that is set accurately in the micrometer head and locked in position. When assembling rods to the A and B heads, the reading line on the micrometer head should be lined up with the marking on each rod (except for the 2-3"). Rod diameters are approximately 11/32". Each rod has individual length adjustment for the anvil by means of special wrenches furnished. Movement of screw: 1", Number of measuring rods: 4, Number of spacing collars: One 1" Two 2".

Manufacturer: L.S. Starrett Brand: L.S. Starrett

Technical Specification Item Pin Gage Plus Set Shape Round Material Steel Measuring Range (In.) 0.626 to 0.750 Increments (In.) 0.001 Tolerance 0.0002 Length (In.) 2 Application Used to Determine Small Hole Sizes/Gage Slots/Find Hole Distances Includes Case Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 547-316S

Mitutoyo 547-316S Digital Thickness Gage, 0-0.4"/0-10mm Range, 0.0005"/0.01mm Resolution, +/-0.001" Accuracy, Digimatic IDC Indicator

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-917

The Mitutoyo 368-917 Holtest three-point micrometer set has TiN-coated points, a measurement range of 0.5-0.8”, and is precise to 0.0002”, with + or - 0.0001” of accuracy. Titanium nitride (TiN)-coated measuring contact points offer durability and impact resistance, while contact point geometry allows the instrument to measure to the bottom of a blind hole. The ratchet stop offers constant force for repeatability. Includes inspection certificate ensuring that the exact micrometer purchased has met National Institute of Standards and Technology master standards. This gage set includes two complete display units, setting ring, extension rod, and a fitted plastic case. Bore gages measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gages are typically calibrated with a setting ring. Bore gages come in two types, one simple, and the other direct-measuring. Simple bore gages are used with a caliper to transfer the hole measurement, while the more complex gages take the measurement directly, and display the measurement through a vernier, dial, or digital display. Bore gages have a two- or three-point contact, which indicates how many points on the gage head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point systems are used to measure lobing, or triangular form error. Pistol-grip bore gages are used for fast, single-handed operation with good repeatability from one operator to another. Bore gages, regardless of type, can be used in some special applications, such as measuring threads, spline pitch diameters, and deep bores. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL. What’s in the Box? Mitutoyo 368 series 0.5-0.65” three-point internal micromete...

Manufacturer: PHASE II Brand: PHASE II

Comes with (2) substrate samples (steel, aluminum), (4) calibrated thickness samples, carry case, batteries and operation manual.Model #PTG-3500 Integrated probe that can automatically detect a ferrous or non-ferrous substrate.Mo

Manufacturer: Starrett Brand: Starrett Model: 1015MB

After inserting work between the measuring contacts, releasing the lever will cause the spindle to contact the work, giving an accurate size reading because measuring pressure is independent of the user. Indicators have jewel bearings and continuous dials. The contact edges are radiused to prevent the work from being marred or deflected. The flat contact area measures 6.3mm in diameter and is 0.125mm thick.

Manufacturer: Starrett Brand: Starrett Model: 687M-3Z

Starrett Countersink Gauges are offered in three different angles so that the gauge sets on the angular side of the countersink, as opposed to a chamfer gauge which sets on the top edge of the chamfer. This gauge directly reads the large diameter of the countersink in 0.002" or 0.05 mm increments. A set master ring is furnished with each gauge for calibration and setting. Press the button on top of the indicator to firmly depress the gauge head into the countersink. When the gauge is removed, the indicator reading is held in place until the reset button is activated.