Dimensional Measurement - Page 1137

Manufacturer: Checkline Brand: Checkline

The J50RSO Running Diameter/Thickness Gauge without Flanges, Range 0.005 mm - 5.00 mm is a precision instrument that features ball bearing mounted cylindrical rollers, in lieu of flat anvil surfaces, which makes this dial micrometers ideal for measuring the diameter or thickness of slowly moving wire, filaments, foil, ribbon, narrow fabrics, etc. without stopping the manufacturing process.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-264B

Length standard: ABSOLUTE electrostatic capacitance type linear encoder, Max. response speed: Unlimited, Measuring force: 1.5N or less, Battery: SR44 (2 pieces.), 938882, Battery life: Approx. 2000 hours under normal use, Dust/Water protection level: IP42, This ID-C series digimatic indicators are exclusively designed for id measurement. Origin-set/preset, zeroset, GO/+/-NG judgment, counting direction switching, power on/off, data output, inch/mm conversion (on inch/metric models only) alarm: low voltage, counting value composition error, over-flow error, tolerance limit setting error.

Manufacturer: Checkline Brand: Checkline

Materials used: Metals, glass 1/4" diameter, 15 MHz delay line transducer with cable. Includes 1/2" and 3/8" length interchangeable delay lines tips. Single element delay line transducer, 15 MHz, without cable (007 gauges only)

Manufacturer: WDQY Brand: WDQY

Product Description Features: 1.Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials. 2.Transducer models are available for special application, including for coarse grain material and high temperature applications. 3.Two-Point Calibration function. 4.Two work modes: Single point mode and Scan mode. 5.Coupling status indicator showing the coupling status. 6.Optional software to process the memory data on the PC. 7.Optional thermal mini-printer to print the measured data via RS232 port. Specifications: 1.Display：4.5 digits LCD with EL backlight. 2.Measuring Range：0.75～300mm (in Steel). 3.Sound Velocity Range： 1000~9999 m/s. 4.MT160： 0.1/0.01mm 5.Accuracy： ±（0.5%Thickness+0.04）mm, depends on materials and conditions 6.Units: Metric/Imperial unit selectable. 7.Four measurements readings per second for single point measurement, and ten per second for Scan Mode. 8.Memory for up to 20 files (up to 99 values for each file) of stored values. 9.Power Source：Two "AA" size, 1.5 Volt alkaline batteries. 100 hours typical operating time (EL backlight off). 10.Communication：RS232 serial port. 11.Outline dimensions：150×74×32 mm. 12.Weight：245g The shipment will be arranged in 1-3 working days( not including customized product), and takes about another 3-9 working days to reach you.

Manufacturer: Starrett Brand: Starrett Model: 824K

The Starrett 824 series fixed range vernier inside micrometer has an adjustable sleeve and adjustable contacts on the thimble end help provide accurate measurements, and a vernier scale in inch units for making precise measurements. A knurled thimble helps provide secure grip, and the handles are heat-insulated to help reduce temperature-related expansion or contraction. The vernier scale is graduated to 0.001” and a knurled ring-type lock nut holds measurements in place. The micrometer has a satin chrome rust- and glare-resistant finish.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: WQY Brand: WQY

The shipment will be arranged in 1-5 working days(not including customized product), and takes about another 3-10 working days to reach you. 1.6" - 2.0" RANGE(40mm-50mm) SETTING RING ACCURACY WITHIN +/-0.00002". READING: 0.0002" SELF-CENTERING 3-POINT FOR ACCURATE MEASUREMENT OF INTERNAL DIAMETERS. HIGHLY DURABLE CARBIDE-TIPPED CONTACT POINT. MEASUREMENT CAN BE TAKEN CLOSER TO THE BOTTOM OF THE BLIND BORE., AND CAN BE TAKEN INTO A DEEP HOLE WITH AN EXTENSION. RATCHET STOP PROVIDES UNIFORM MEASURING PRESSURE AND ASSURES HIGHEST READING ACCURACY.

Manufacturer: Starrett Brand: Starrett Model: 1015B-6

After inserting work between the measuring contacts, releasing the lever will cause the spindle to contact the work, giving an accurate size reading because measuring pressure is independent of the user. Indicators have jewel bearings and continuous dials. Throat depths include 2-1/2", 4", and 6". The contact edges are radiused to prevent the work from being marred or deflected. The flat contact area measures 1/4" in diameter and is 1/8" thick.

Manufacturer: MARS Brand: Mars Model: MARS2558

Features- Coincidence focusing system 15 x eyepieces One position instrument. Measure both meridians without changing optical system Simple vertical adjustable head to fit patient Astigmatic axis 0 to 180 degree Dual eye level sighting system Dioptre 36 - 52 (in 0.25 steps Paint finish : black or white The achromatic optical systems to precise measurement of the corneal radius curvature and accurate measurement of radius curvature of contact lens Standard accessories Dust cover One spare bulb

Manufacturer: cn Brand: C.N.

HIGH ACCURACY ULTRASONIC THICKNESS GAUGE The ultrasonic thickness gauge Model TT130 series are featured as cost-efficiency and designed to make accurate measurements on steel, cast iron, aluminum, red copper, zinc, quartz glass, polyethylene, PVC, gray cast iron and nodular cast iron. Thickness measurements are made from one side of the material with no need to cut the part. The TT130 series offers various practical measurement features such as Automatic Probe Recognition that recognizes transducer types, Field Calibration of all materials Sound velocity range 509 up to 18699m/s 2000 readings memory Data output to PC High-Low Limits setting 4 digit LCD display with settings Backlight display for dark environment and adjustable. FEATURES Available for gauging various materials such as metal, glass, plastic, rubber and etc. High measurement accuracy and wide range gauge applications Suitable for pipe gauging. Whole range transducer models are available for almost all kinds of application, including coarse grain material gauging and high temperature applications (Max. temperature up to 300c). Adaptive probe function built in: Patent technology of automatic probe recognition: Automatically recognizing for probes allowing the gage to match with probes made from various probe manufacturers. Power on automatic testing function contributing to measurement accuracy increasing. Auto power off detection and customizing power off configuration. Probe Zero function, Sound Velocity Calibration function. 9 velocities built in and programmable. Several practical measurement modes available: Standard Mode, Scanning Mode, Difference Mode, Average Mode, Maximum limitation Alert Mode, High Temperature Mode(Should be matched with high temperature probe). 8 button keyboard designing for convenient shortcut operations for Probe-Zero function, One-Point and Two-Point Sound-Velocity-calibration, as well as numerical adjusting with direction key control.

Manufacturer: Avongard Brand: Avongard

Avongard Tell-Tales are precision gauges uses to monitor movement of a crack, horizontal or vertically on a flat surface. The monitor that consist of two plates which overlap for a part of their length. The bottom plate is calibrated in millimeters and the top plate is transparent and marked with a hairline cursor in the form of a cross.