Dimensional Measurement - Page 1199

Manufacturer: Q-Mark Manufacturing Inc. Brand: Q-Mark

M2 stylus with 0.3 mm ruby ball.  Stainless steel base, 3.0 mm diameter x 5.0 mm long.  Tapered carbide shaft with 1.0 mm major diameter and 0.20 mm minor diameter.  Overall stylus length is 10.0 mm.  Stylus weight is 0.21 gram.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-095-007-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 1410S-10CAL

The calibrated Mitutoyo 1410S-10CAL dial indicator is used to measure surface variations. It has a measurement range of 0 to 0.25", graduations of 0.001", an accuracy of + or - 0.001", and a range per revolution of 0.1". It has a white dial and contrasting hand for readability. The compact size of this indicator (diameter of 40mm) makes it suitable for use in environments where space is limited. The stem design provides a long clamping range; the frame has no through screw-holes, which improves dust- and water-resistance; and it has a lug back for mounting from the rear of the indicator. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.This dial indicator has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. It is a continuous dial with a reading of 0-100, for direct readings. It has a force of 1.4 Newtons (N) or less.SpecificationsRange0 to 0.25"Graduations0.001"Accuracy+ or - 0.001" (overall)Range per revolution0.1"Measuring force1.4N or lessStem#4-48 UNF contact point thread mount with 3/8" diameter spindleFaceDial, white face, lug backDial reading0-100Dimensions81.2 x 21.1mm (H x W) not including lug; 40mm dial diameterWeight90gStandardsANSI, JIS B7503-1997, and AGDH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right.Dial indicators are also called dial gauges, probe, and electronic indicators....

Manufacturer: TTC Brand: TTC

Features0~6" Electronic CaliperResolution: .0005"Inch/metric conversion.4 Piece Combination Square Set4R graduations: 8ths & 16ths, 32nds & 64thsForged and hardened square and center head.12" hardened blade.Reversible protractor.0~1" MicrometerAccuracy: ±.0001"Friction thimble for exact readings.Anvil and spindle hardened and ground.Carbide faces.Includes(1) 0~6" electronic caliper.(1) Combination square set including 12" blade, protractor, square and center head.(1) 0~1" micrometer

Manufacturer: Fowler Brand: Fowler

Includes: (2) Contact points: .040" & .120" (2) Dovetail extensions: 3/8" & 5/32"

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2416SB Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: CST/Berger Brand: CST/Berger Model: 17-645

5x Magnification with 1:100 stadia. 7-3/4" Long, with draw tube extending to 8-5/8". Fixed eyepiece. Two-inch radius arc graduated to degrees, 0? to 90? in both directions. Vernier reading to 10 minutes. Percent scale 0% to 100% in both directions. Padded Cordura belt loop case included.

Manufacturer: Fowler Brand: Fowler

0.2" - 2.2" Inside Micrometer With Fowler Inside Micrometer Calipers, you are assured of smooth operation and stabilized uniform accuracy. The frame is specially designed to enable the micrometer to provide extremely accurate small internal measurements. Includes: setting ring spanner wrench case Features: Satin chrome finish on barrel and thimble. Measuring faces are fully hardened, precision ground and microlap finished to assure exceptionally accurate measuring. Spindle threads are hardened and ground. Microfine graduations (.001 or .01mm) on a satin chrome finish permit easy reading. Ratchet stop thimble assures exact and repetitive readings. Easy zero adjustment on the sleeve. Meets or exceeds Federal accuracy specs.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 3414SB Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 115-215

The Mitutoyo 115 series spherical face micrometer has a spherical anvil and a flat or spherical spindle face, depending on the model, for measuring the thickness of tubing walls, and a vernier scale in metric units for taking precise outside diameter (OD) measurements. It also has a ratchet-stop mechanism to help provide uniform pressure for precise, repeatable measurement during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm with a satin chrome rust- and glare-resistant finish. The spindle and anvil are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.