Dimensional Measurement - Page 1202

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 102-303

The Mitutoyo 103 series outside micrometer has a vernier scale in metric units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a heat-insulated frame to help reduce temperature-related expansion or contraction. The vernier scale on the thimble and sleeve is graduated to 0.01mm, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: CAS Corporation Brand: CAS Model: CI-201A

The CI-200 Series, a family of digital indicators providing full featured versatility and dependability at an economical price. A wide array of standard features include either 304 stainless steel IP67 rated or hardened plastic NEMA 12 enclosures, AC or DC operation, choice of dry cell or rechargeable battery, full function numeric keypad, ID capabilities, and much more.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe rectangular mounting base is available in a 2", 3", 4", 6", or 8" length and has one to three collet mounting hole locations for use with Brown & Sharpe depth gauges. The supplied mounting collet holds a depth gauge (sold separately) securely. The base is 9/16" high and has 9/16" tapped mounting holes. It is made of hardened steel for durability and accurate measurements, and is suitable for precise measurement in a variety of manufacturing, machining, and mechanical engineering applications.Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, is headquartered in North Kingstown, RI.

Manufacturer: Starrett Brand: Starrett Model: 82A6

All probes are furnished with an actuating rod.

Manufacturer: IN-LINE INDUSTRIES Brand: Inline Industries

Quickly set-up, tune up, and check the accuracy of your shop's tools with this system. Check table saw blade and fence alignment, arbor and blade run-out, miter slot to blade squareness, arbor/chuck run-out, jointer/planer head to table parallelism, jointer/planer knife alignment, out-feed table alignment; router/shaper spindle run-out, or any other set up or alignment measurement you desire. The A-LIGN-IT deluxe kit dial indicator reads in .001" of an inch increments for absolute precision. Self adjusting miter groove bar with leveling screws and spring plungers for perfect fit in your miter slot. Dial indicator mounting bar measures 3/4" x 3/4" x 11". Also includes a planer bar, and a precision 1/2" x 3-3/8" pin for drill press and router tests. Special spring and arbor nut to test saw blade and arbor run-out, 22 piece tip set for the dial indicator to meet any application. Includes hardware and hex wrench for assembly and instructions and instructional DVD for expert guidance in getting the best performance and accuracy from your woodworking machines

Manufacturer: Flexbar Brand: Flexbar

Flexbar Snap Gage A U-shaped Go/No-Go gage with hardened, adjustable anvils on opposite ends used to inspect the length of part features. •Model AR •Type: A (2 round buttons top and bottom) •Frame No. 6 •Range: 2 1/2 - 3 Model No. 11-2006, Flexbar Snap Gage

Manufacturer: Alvin Brand: Alvin

Sized 14¾" x 19½" for media up to 11" x 17". Graduated in inches with graduated scales on top and side in inches. Lockable transparent straightedge and paper clamps in three areas to secure media. Reversible feet included to elevate drawing surface 7° or 15°. Vinyl carrying case included.

Manufacturer: Allegro Industries Brand: Allegro Industries

Allegro Deluxe Banana Oil Solution, 8oz. 8 oz Solution Only Iso Amyl Acetate (banana oil) offers the oldest method of testing respirator fit. Its strong, readily identifiable odor will be recognized if respirators donâ€TMt obtain a fit. Pictured: Complete kit item# 0202

Manufacturer: Grizzly Brand: Grizzly Model: G9607

Get ultimate accuracy while measuring depth in holes, steps and grooves. Sold in 8 ranges, these Depth Micrometers feature thick, wide bases for stability, easy-to-read display and unbeatable accuracy over any depth gauge! Resolution is 0.00005"/0.001mm.

Manufacturer: Starrett Brand: Starrett Model: 63P

The Starrett 63 series long range micrometer head has long spindle travel, and a vernier scale in inch units for taking precise measurements to 2”. The micrometer has a plain stem for mounting in a fixture with a split-body clamp or setscrew. The vernier scale is graduated to 0.001” or 0.0001” depending on the model, and has a satin chrome rust- and glare-resistant finish. The spindle is made of hardened steel to help provide durability, with a flat measuring face suitable for measurement or use as a stop, and is micro-lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.