Dimensional Measurement - Page 1214

Manufacturer: PCE Instruments Brand: PCE Instruments Model: PCE-CT 28

The PCE-CT 28 Coating Thickness Meter for cars is for measuring the thickness of paint and plastic on ferrous or non-ferrous materials without damaging the coating's surface. The Coating Thickness Meter stands out due to its high range of measurement. This Coating Thickness Meter should be one of the tools used by technicians in areas of paint or lacquering such as in production, automotive body repair or quality control. Technical Specifications Measurement range: 0 to 1250µm Resolution: 0.1 µm (in a range of 0.0 to 99.9 µm) 1 µm (above the range) Accuracy : ±2% or 2.5 µm (highest reading is valid) Minimum surface measurable: 6 x 6mm Minimum radial curve: convexed: 5mm / concaved: 60mm Minimum thickness of material: 0.3mm (for ferrous materials): 0.1mm (for non-ferrous materials) Display: LCD with 4 x 10mm high digits Operating temperature: 0 to 50°C Power: 4 batteries Dimensions: 126 x 65 x 27mm Weight: 120g with batteries Delivery Contents: 1 x PCE-CT 28 Coating Thickness Gauge with integrated F/N sensor 1 x carrying case 4 x batteries 1 x set of calibration standards 1 x user's manual

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 139-177

The Mitutoyo 139 series tubular vernier inside micrometer includes a set of extension pipes with anvils for a diversified range of measurement when measuring inside dimensions of cylinders, rings, and parallel surfaces. It has a vernier scale in inch units for taking precise inside dimension (ID) measurements to 0.01mm, and a satin chrome rust- and glare-resistant finish. The micrometer head has a travel of 25mm per revolution that helps provide quick positioning. The hollow, tubular extension pipes help provide light weight with rigidity. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 139-177

The Mitutoyo 139 series tubular vernier inside micrometer includes a set of extension pipes with anvils for a diversified range of measurement when measuring inside dimensions of cylinders, rings, and parallel surfaces. It has a vernier scale in inch units for taking precise inside dimension (ID) measurements to 0.01mm, and a satin chrome rust- and glare-resistant finish. The micrometer head has a travel of 25mm per revolution that helps provide quick positioning. The hollow, tubular extension pipes help provide light weight with rigidity. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: INSIZE Brand: INSIZE Model: 3520-100E

Electronic inside micrometer, 3-4"/75-100mm.

Manufacturer: INSIZE Brand: INSIZE Model: 3520-100E

Electronic inside micrometer, 3-4"/75-100mm.

Manufacturer: ABS Import Tools Brand: HHIP

INCH/METRIC .0005" /.01mm RESOLUTION | 0~24" Range | Large display screen | Preset memorizing function | Hardened and ground stainless steel frame | Cast iron base | True inch/metric conversion.

Manufacturer: Flexbar Brand: Flexbar

Flexbar Digital Electronic 3-Point Internal Micrometers. Self-Centering 3-Point Bore Micrometers For The Accurate Measurement Of Internal Diameters. Each 3-Point Bore Micrometer Comes In Its Own Fitted Hard Case Complete With Setting Ring And Depth Extension. Ring Gage Certificate To NIST Available Upon Request. Self-Aligning And Self-Centering Carbide Tipped Measuring Contact Points Suitable For Blind Bore Measurements. Ratchet Stop Provides Uniform Measuring. Setting Ring Accuracy: .000020" Resolution: .00005"/0.0001mm (Inch/Metric Conversion) Thimble Graduation: 0.0001". Easy To Read Electronic Digital Display With The Following Measurement Functions: Absolute And Incremental Measurement Tolerance Settings Preset (+ And -) Hold Key SPC Data Output Capability (RS232C) Model No. 20850, Digital 3-Point Bore Micrometer, Measuring Range: .275-.350"

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe LCD outside micrometer head has a single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm). It has a plain stem for mounting in a fixture with a split-body clamp or setscrew. The micrometer has a flat measuring face for measurement or use as a stop, and is tungsten carbide-tipped for wear resistance.The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. It also has a function lock and two presets. The micrometer has Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately). The micrometer includes, and is powered by, a single CR2032 lithium cell battery.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Mitutoyo America Corporation Brand: Mitutoyo Model: 511-771

Mitutoyo Dial Bore Gage 511-771, 18-35mm with2109SB-10 dial indicator, 0.001mm graduation, stem 8mm diam.

Manufacturer: TK Brand: TK

Application Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, etc. in industries of petroleum, shipbuilding, power station, and machine manufacturing. Materials measured: only 11 types of materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gray cast iron, nodular cast iron Technical DatasModel Name:UM6700Dimensions: Main Unit 140mm×60mm×24mmGloss Weight :1KGMeasuring range (metric/imperial): 1.0-300mm,0.06-11.8inch (in Steel)Resolution: 0.01mmAccuracy: ±(0.5%n+0.2)mmUnits: Metric/Imperial unit selectablePower supply:4x1.5 AAA size (UM-4) battery 1Sound Velocity Range: (500~9000) m/s Operating conditions:0-+40ºC,≤90%RHNote: due to the post do not accept the liquid, please kindly buy coupling at your local store, if you can not find the coupling agent at your local store, you can use the detergent or oil to replace, but please do not wash in water after using, you can clean by cloth or paper to avoid the rusty