Dimensional Measurement - Page 1222

Manufacturer: Starrett Brand: Starrett Model: 121AZ

Tubular inside micrometers are designed for large internal measurements beyond the capacity of most other micrometers. Each set consists of a micrometer head mounted at the end of a tubular holder in which measuring rods can be inserted and adjusted to the desired size. Final size reading in thousandths of an inch (0.001") is obtained using the micrometer head. Rods and holder are made of steel tubing, light in weight, yet very rigid. Each rod is accurately graduated with inch divisions, which are set to the size desired by a line on the holder, and firmly held by a large, knurled clamping nut. The collet has a design, insuring an extremely tight grip on the rods at any setting. Movement of screw: 1".

Manufacturer: DeFelsko Brand: DeFelsko

The 6000-FTS1 PosiTector 6000 FTS1 Coating Thickness Gauge for measuring Thick Coatings using magnetic principles to measure coating thickness on ferrous metals, accurately and quickly.

Manufacturer: Magswitch Brand: Magswitch Model: 90 Degree Angle 1000

90 Degree Angle 1000

Manufacturer: BRENCOR Brand: BRENCOR

With foam fitted case.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 209-920

Digimatic Caliper Gage - External Tube Thickness Measurement Type 0-1.97”, Disk 50 mm for flat surfaces.

Manufacturer: Mitutoyo America Corporation Brand: Mitutoyo Model: 209-901

Mitutoyo Dial Caliper Gage 209-901, Internal Measurement,15-65mm, 0.05mm, 188mm Depth.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-171

The Mitutoyo 368 series Holtest vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in metric units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.001mm or 0.005mm depending on the model. The measuring faces are carbide-tipped or TiN-coated for wear resistance depending on the model. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Horiba Brand: HORIBA Model: 375004

Gloss meters reflect light when exposed to a surface. The intensity of this reflected light is measured as gloss. The IG-320 provides a measured value to confirm visual observations reducing human error. Applications vary widely from floor maintenance, floor polishing, marble polishing, to quality control of paint finishes on cars and appliances. Calibrations are performed using a black glass standard. Operation is simple and the user does not need to have any technical knowledge. The meter is laid on the surface to display the gloss value instantaneously. The IG-320's measurement angle is set at 60 degree. The IG-320 is very accurate with a ± 0.5% reproducibility capability at full scale. Battery life: 15 hours of continuous operation. The protective cap holds the black glass calibration plate and protects the meter detection area. Includes meter, calibration plate, batteries.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 570-304

The Mitutoyo 570-304 LCD Absolute Digimatic height gauge displays a metric measurement range of 0 - 600 mm, an LCD digital readout precise to 0.01 mm, with + or - 0.05 mm of accuracy, and data output to transmit results to a Mitutoyo miniprocessor or computer for statistical process control (SPC). This height gauge has an electronic microprocessor providing the ability to preset a reference height at any position, as well as to set a temporary zero position and return to a true zero reading. The output port transmits results to a Mitutoyo miniprocessor or computer through an interface cable (not included) for SPC. The gauge has a plug to receive input from an electronic touch probe (not included) for efficient digital measurement. An electrostatic capacitance linear encoder helps prevent overspeed errors to help ensure repeatable, precise measurement. A hand-operated feed wheel raises and lowers the gauge on the beam for measurement ease, and a clamp lever allows the user to hold measurement position. The scriber, used to mark a position on a workpiece, is 32 mm x 80 mm (H x W), carbide-tipped to help prolong life, and is held to the gauge by a screw clamp for fastening ease. The grip-base helps hold the unit in position by hand. The height gauge weighs 14.11 lbs/6.4 kg. The unit comes with an SR44 battery. Height gauges, also called gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are ty...

Manufacturer: Mahr Federal Inc. Brand: Mahr Federal Model: 300P-1

Patented "Channel Lock" design assures precisely parallel anvil surfaces throughout the full 25 mm/1 inch range of adjustment. All Series 300P Snap Gages are fully adjustable with positive position locking at any point within the range.Large 15. 5 mm/.61 in square tungsten carbide anvils provide flat, parallel, long-lasting working surfaces ensuring precision that lasts.