Dimensional Measurement - Page 1231

Manufacturer: ATE Pro Tools Brand: ATE Pro. USA Model: 98029 Color: Stainless-Steel

The ATE Pro 98029 dial caliper has a 0 to 6" measurement range with 0.001" graduations for obtaining outside, inside, step, and depth dimensions for a variety of precision measurement uses. It has a thumb roller for adjusting the caliper and lockable jaws for saving a measurement. The stainless steel frame and slide are durable. The dial caliper comes in a fitted plastic case and is suitable for applications such as quality control for machined parts.Dial calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to measure inside, outside, and step measurements in standard or metric units. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it to take measurements. A circular dial indicator is fixed to the movable jaw on a toothed gear rack that transfers movement of the jaws to the dial needle. The base measurement is taken from the long beam, which provides the initial whole measurement in inches or centimeters, and added to the dial reading, which provides fractional measurements in inches or millimeters. A locking mechanism provides the ability to take differential measurements for determining the difference in measurements between two objects. Compared to digital calipers, dial calipers are more durable, but are more susceptible to shock damage and prone to getting dirt in the gears, which can cause accuracy problems. Vernier calipers are more durable than dial calipers because they do not have internal moving parts, but they can be more difficult to read. Dial calipers are commonly used in fields such as metalworking, mechanical engineering, machining, and carpentry.ATE Pro Tools distributes hand and power tools for home, industrial, and construction applications. The company, founded in 2012, is headquartered in Norwalk, CA.

Manufacturer: Toolconnection Brand: Tool connection

Twelve blades for automotive use. Offset for easy access. Suitable for ignition points, spark plug gaps and tappet adjustment.Metric and Imperial measurements 0.203mm (0.008") to 0.660mm (0.026")

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel no-go (-) plug gage is a class ZZ inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060”. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages measure 2” long, are within .00001” round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. This gage is made of tool steel 60/62 Rc (cold stabilized) for durability and has a black guard finish to inhibit corrosion and for indicating wear. Sizes are available from .0040” to 1.0005” (increments of .001”), with a tolerance of -.0002” for longer wear. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.

Manufacturer: Starrett Brand: Starrett Model: 167-11/64

Manufacturer: Dragonmarts Co. Ltd. / Uxcell Brand: uxcell Model: a14111800ux0371

Designed with 250 x 500mm metric scales, stainless steel material make more convenient using. It is a ideal measuring tool for engineers or carpenter. to lay out cutting lines at 90-degree angles.

Manufacturer: Central Tools Brand: Central Tools Model: 3C351

This carbon fiber digital caliper has all the features of a standard digital caliper with less weight and a lower cost. The added capability of fractional display increases the possible range of uses. Carries a one year warranty against workmanship and materials.

Manufacturer: Cooper Hand Tools Brand: Lufkin Model: 2325D

Blade Width (Inches): 3/4-Inch Blade Length (Inch): 25-Feet Blade Style: A4 Case Color: Chrome Blade Finish: Yellow Clad Replacement Blade Cat No. : None Features

Manufacturer: Oregon Rule Co. Brand: Oregon Rule Co. Model: ER-S024VD-TC/5PK Color: Silver

These adhesive backed rules were designed with original graphics from Oregon Rule Co. Excellent quality and easily read, stick these rulers nearly anywhere for convenient, quick measurements: work benches, lathe beds, drill presses, fishing boats, table saws, sewing tables, radial arm saws, butcher blocks, drafting tables, tool boxes, and more. These rulers lie flat and can be cut to size using scissors. 1 1/4 inch wide and 24 inch long Fractional, 1/16" graduations Reads vertical down (zero at the top), continuous inches 5 pack of 24" rulers Bold black graphics on a silver background

Manufacturer: Stanley Consumer Tools Brand: Stanley

RULE TAPE 1/4X10' POCKET

Manufacturer: uxcell Brand: uxcell Model: a16011800ux1537

Description:Leave Thickness(mm): 0.02, 0.03, 0.04, 0.05,0.06, 0.07, 0.08, 0.09, 0.10,0.15, 0.20, 0.25, 0.30, 0.40, 0.5, 0.75, 1.00.A tool used to measure gap widths, mostly used in engineering to measure the clearance between two parts.