|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $120.67 16% OFF
Manufacturer: Fowler
Brand: FOWLER HIGH PRECISION
Manufacturer: Fowler
Brand: FOWLER HIGH PRECISION
Range: 1.4"-6". Carbide anvils Graduation: .0005". Easily adjustable Self-centering. Insulated grip Chrome plated handle. Includes extension holder and fitted case.
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $120.99 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 505-675-54
Color: Red
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 505-675-54
Color: Red
|
The Mitutoyo 505 series dial caliper uses a combination of a vernier scale and a dial whose pointer travels one rotation for each 0.1†measured to perform precise outside diameter (OD), inside diameter (ID), depth, and step measurements. The dial caliper has a fixed (main) scale and a movable dial, unlike the vernier caliper which has a second, movable vernier scale. The dial is circular and has a pointer; it is mounted on a toothed gear track which drives the pointer. As the dial moves over the main scale rule, the pointer rotates once to give the additional fractional reading. The second measurement is added to the main scale reading to obtain a final result accurate to the smallest graduation marked on the dial. The main scale and dial are marked in inches. The dial can be rotated beneath the pointer to measure size differential between two objects. The dial caliper is easier to read than the vernier caliper, thus safeguarding against user reading errors. Its standard of precise measurement complements the use of the vernier caliper; the dial provides an ease in reading and interpolating measurements which most vernier calipers, due to their need for direct observation of both scales, may not provide. The dial uses a rack-and-pinion mechanism and is mounted on a gear track where each tooth equals one quarter of the dial revolution, and four teeth equal 0.1â€. The smooth-moving dial is graduated to 0.001†and offers gear train shock protection. A thumbwheel permits fast operation with one hand. A clamping screw controls scale movement and a dial calibration lock holds the sliding jaw’s position. The caliper is made of hardened stainless steel construction with titanium nitride (TiN) coating on the beam wear surface helps extend caliper life. Two sets of jaws provide four-way measurement capability: outside dimension (OD), inside dimension (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are measured....
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $121.22 53% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: White
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: White
Remarkable for their robustness, these precision dial gauges are essential for the workshop. Full-metal dial casing. Hardened stainless steel fixing shank and plunger. EN ISO 463 Factory standard. Range of indication Maximum plunger travel is 5.4mm. 2.2mm scale spacing. Rotating dial. Adjustable tolerance marks. M2.5 mounting thread for the measuring insert. 3mm diameter ball tip, already mounted. Comes in Cardboard box. Identification number. Inspection report with a declaration of conformity. 0.01mm reading/40mm dial diameter.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $122.00
Manufacturer: Starrett
Brand: Starrett
Model: T444.1XRL-2
Manufacturer: Starrett
Brand: Starrett
Model: T444.1XRL-2
T444.1XRL-2 Outside Micrometer .0001" Grad, 0-2" Range, Ratchet Stop, Lock Nut, Carbide Faces. The Starrett T444 Series have heat-insulators on the frame to help reduce temperature-related expansion or contraction. The Vernier scale on the thimble and sleeve is graduated to 0.001", with a satin chrome rust and glare-resistant finish on the thimble. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement.
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $122.20 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-466E
Color: Yellow
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-466E
Color: Yellow
|
The Mitutoyo 513 series dial test indicator has a white or yellow face, an 8mm stem diameter, and metric measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The horizontal face is parallel to the axis of the indicator and three dovetail mounts, and can be mounted either horizontally or vertically from the front, top, or back of the indicator. It has a unified outer frame that prevents oil and water from permeating the front face, a hard frame body that provides rigidity and durability, and a clear, flat, and scratch-resistant crystal face. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The basic set includes a dial indicator, a 2mm carbide contact point, an 8mm diameter stem, a knurled clamp ring, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, a yellow face that meets ANSI standards for metric indicators or white face, and double scale that is numbered both clockwise and counter-clockwise for reading in both directions.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking ...
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $123.00 3% OFF
Manufacturer: G.A.L.
Brand: Gal
Manufacturer: G.A.L.
Brand: Gal
• Angle of preparation, 0º to 60º • Excess weld metal (capping size) • Depth of undercut • Depth of pitting • Fillet weld throat size • Fillet weld length • Misalignment (high-low) WG-4 Weld Gauge or Bridge Cam Gauge is a unique, versatile instrument for the inspection of welded surfaces and joints. It measures angle of preparation, 0 to 60 º, excess weld metal (capping size), depth of undercut, depth of pitting, fillet weld throat size, fillet leg length, misalignment (high-low), and linear measurements up to 60mm or 2 inches. It measures in both inch or millimeters. It is easy to use. It comprising of one rotating dial and one sliding pointer. Move the dial or pointer until it makes the appropriate contact and then read the result.
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $124.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 151-223
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 151-223
|
The Mitutoyo 151 series micrometer head has a wide 8mm-diameter spindle for heavy-duty use and a vernier scale in metric units for taking precise measurements. It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The vernier scale is graduated to 0.01mm or 0.001mm depending on the model, and has a satin chrome rust- and glare-resistant finish. The flat measuring face is carbide-tipped for wear resistance and is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $124.02
Manufacturer: Starrett
Brand: RSC
Manufacturer: Starrett
Brand: RSC
Universal Indicator Magnetic Base Holder with Triple Jointed Arm and Fine Adjustment
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $126.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-528
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-528
Color: White
|
The Mitutoyo 513 series pocket type dial test indicator has a white face, a 0.375" stem diameter, and inch measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The pocket-type dial test indicator has a horizontal face and three dovetail mounts, and can be mounted either horizontally or vertically from either the front, top, or back of the indicator. It has jeweled bearings that provide high sensitivity and accuracy, a reversible measuring direction, and a contact point that can be adjusted within 220 degrees of the axis. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The basic set includes a dial indicator, a 0.079" carbide contact point, a 3/8" diameter stem, a knurled clamp ring, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, and a white face.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perp...
-
5.0 of 5.0 with 5 Reviews
SALE PRICE: $126.21 19% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 103-217
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 103-217
|
The Mitutoyo 103 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001â€, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
|
|