Dimensional Measurement - Page 1267

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-520-129-0 Color: White

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-520-129-0 Color: White

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: INSIZE Brand: INSIZE Model: 3241-1

Depth micrometer, 0-1", graduation 001 inch base 3.996×.669".

Manufacturer: Flexbar Brand: Flexbar

Flexbar Pin Gage Sets. Available in Plus or Minus Tolerances: .0002" Limit Flexbar Pin Gages, are ideal for accurate Checking of hole Size, location, Gage slots, distance betWeen holes, Setting other Gages, go and no-go Gaging, and more. Every Size Gage hole is clearly marked for Size. Size laser etched on each piece except .011 - .060 Range Sets. Gages fully Hardened to 60-62 RC, Centerless lapped to 10 Millionths AA Micro-Finish or better. Each Gage Checked against master Gages traceable to the National Bureau of Standards. Gages are Cylindrical, 2" in length and have no sharp corners. Accurate to .0002". Model No. 17728, Pin Gage Set, Range:0115-.0605 Plus, 50 piece Set.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 1410S-10 Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Swanson Tool Brand: Swanson

Included with (6) Aluminum Torpedo Levels with built-in Neodymium Magnets the Savage by Swason TL043M aluminum torpedo level is 9-inches long and is magnetic for better durability on the jobsite. The level has exclusive gelshock endcaps for better protection when or if the magnetic level is dropped on the jobsite. The professional series level meets or exceeds industry standards. Swanson features a limited lifetime warranty on their box beam level.

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: Starrett Brand: Starrett Model: 1019M-25 Color: Yellow

The Starrett 1019M-25 internal dial caliper gauge opens from 25 mm to 75 mm with a 3-1/4” (approximately 80 mm) arm length, and has carbide ball contacts for longer life and wear resistance. The arms reach into the workpiece, such as in bores of castings and inside readings in fabrications, to easily measure small sections of that workpiece. The retraction lever allows for one-handed use and gauge control, while a direct reading dial hand is accurate. Dial indicators, also called dial gauges or probe indicators, are precision measuring tools used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Standard dial indicators measure the displacement along the axis of the indicator. Dial indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation. The L. S. Starrett Company was founded in 1880, originally manufacturing bench vises, squares, and other tools. They acquired other companies throughout the years, expanding their services into making precision measurement instruments and tools, such as calipers, micrometers, saw blades, and gauges. Starrett is headquartered in Athol, Massachusetts and has manufacturing facilities in Brazil, the United Kingdom, China, and other locations.

Manufacturer: Starrett Brand: Starrett Model: 579D-12

Telescoping gauge is used for determining the true size of holes, slots, and recesses up to 6". The ends of both contact is hardened and ground to a radius to allow proper clearance on the smallest hole the gauge will enter. This tool must be slightly "rocked" in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn. The final hole size is obtained by measuring over the gauge contact with a micrometer.

Manufacturer: Starrett Brand: Starrett Model: 234MA-425

Starrett 234MA-425 End Measuring Rod with Insulated Handle and Spherical Ends, 425mm Length. Starrett 234 End Measuring Rods or “standards” are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius.