Dimensional Measurement - Page 1278

Manufacturer: INSIZE Brand: INSIZE Model: ISP-A3000-CHART

11.81 inch diameter Overlay Chart.

Manufacturer: Fowler Brand: Fowler Model: Chrome Flex

Chrome Flex Magnetic dial face Lugback and 3/8 stem mountings Resolution .0005 /.01mm Tolerance indicators Absolute/incremental reading Floating zero Carbide tipped point w/4/48 thread

Manufacturer: Mahr-Federal Inc. Brand: Mahr Federal

Outside Micrometer, 1-2 In, 0.0001 In Resolution, Ratchet Thimble, Flat Anvil, Flat Spindle, SPC Output No, Lock Nut Type Lever, Chrome Plated Steel Frame, Carbide Tipped Anvil and Spindle, Meets/Exceeds DIN 863-1, Includes Fitted Case, 1.0 In Calibration Standard Outside MicrometersVernierRatchet stop or friction thimble for exact, repetitive readings. Include a standard bar except for 0" to 1" and 0 to 25mm models.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-225-005-1

The Fowler Premium Depth Micrometers have a measurement range of 0 to 3" or 0 to 4", a base of 2.5" or 4", and a resolution (or smallest graduation interval) of 0.001", with + or – 0.0003" of accuracy. The vernier scale of microfine graduations on satin chrome finish provides precise, readable measurements. Depending on the range of the model, the gauges include either three or four 1" long/0.176" diameter measuring rods. The rods are interchangeable and are fitted to the gauge spindle against a positive stop and then locked for accuracy and stability. The bases are 2.5"long, and the rods and threads are ground, hardened, and lapped for durability and accuracy. They come with a spanner wrench and hardened case. The gauges conform to Federal Accuracy specifications. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: iGaging Brand: iGaging Model: 35-070-C01

The anvil and spindle have a small diameter (3mm x 10mm) for measuring Splined shafts, slots, and keyways. Igaging 0-1" digital quick micrometer absolute origin speedmic snap lever action gage igaging absolute origin speedmic uses the absolute encoding technology in which the sensor memorizes and traces an absolute origin zero position. Quickly measure with Super high precision lever activated - fully opens and closes in less than one second! linear moving sensor provides accurate and reliable measurements IP65 coolant proof measuring range: 0-1"/0-25MM Carbide tipped spindle resolution: 0.00005"/0.001mm accuracy: ±0.00015"/0.003mm fixed thimble. Spc/USB data output available (not included) search Amazon for item: b00inl0ba2. Ball attachment included. Case included 2 years warranty.

Manufacturer: Flexbar Brand: Flexbar

Flexbar Snap Gage. Model AR, Type: A (2 round buttons top and bottom). Frame No. 5, Range: 2 - 2 1/2

Manufacturer: Starrett Brand: Starrett Model: 120A-6 Color: White

The Starrett dial caliper has sharp black graduations every 0.100" on the no-glare, satin-finished stainless steel bar, and graduations on the dial every 0.001". One full revolution of the dial is equivalent to 0.100". These calipers have knife-edge contacts for measuring both inside dimensions (ID) and outside dimensions (OD). The knife-edge contacts can be used to scribe parallel lines on the workpiece. This caliper can be used with one hand through operating the fine adjustment roll with the thumb. The lock screw locks the dial bezel and holds the sliding jaw in position. The depth rod is integrated into the rack of the caliper, unlike many calipers which offer a detachable depth rod, or none at all. The hardened stainless steel components, including the bar, measuring surfaces, rack, gears, and depth rod, offer corrosion resistance, increased accuracy, and long life. Positive split gear anti-backlash control offers increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls, which prevents the gear teeth from jamming. It is undesirable to have much backlash due to the lack of precision offered by the increased amount of play between gears. Certain gear designs can minimize or eliminate backlash; split gear systems actually split the gear into two gears, each half as thick as the original gear. One of these gears is then fixed to the shaft while the other gear is allowed to turn. The free-turning gear is connected to coil springs that rotate it until all of the backlash in the control system has been eliminated. The rack teeth point down to keep foreign matter from clogging the gear operations. This prevents measurement errors where metal chips could interfere with proper caliper operation. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machinin...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 112-237

The Mitutoyo 112-237 point micrometer is for measuring the web thickness of drills, small grooves, keyways, and other small areas that are difficult to reach. The micrometer has a measurement range of 0 to 1.0", graduations of 0.001", and an accuracy of + or - 0.00015". This model has a standard scale in inches. The anvil and spindle have 30-degree points and are carbide-tipped for durability. This gauge has a ratchet stop to help provide uniform pressure for precise, repeatable measurements. This model has a hammertone baked-enamel finish for durability. It comes with a fitted, plastic case.SpecificationsDisplay typeStandard scale in inchesAnvil/spindle stylePointed, 30-degree tip, carbide tippedRange0 to 1.0"Graduation0.001"Accuracy+ or - 0.00015"Thimble styleRatchet stopDimensionsApproximately 0.012" point radius, 55.3mm length and 38mm throat depthWeight205gMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.What's in the Box?Mitutoyo 112-237 pointed micrometerPlastic case

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 295-115

The Mitutoyo 295 series spherical face micrometer has a spherical anvil and a flat or spherical spindle face, depending on the model, for measuring the thickness of tubing walls, and a mechanical digit counter for ease of reading to 0.01mm. It also has a vernier scale in metric units for taking precise outside diameter (OD) measurements and a ratchet-stop mechanism to help provide uniform pressure for precise, repeatable measurement during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The spindle and anvil are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: INSIZE Brand: INSIZE Model: 2187-57

Adjustable snap gage, 2.01-2.24".