Dimensional Measurement - Page 1279

Manufacturer: INSIZE Brand: INSIZE Model: 6801-1202

Magnetic v-block, 3.9x2.8x3.7".

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-240-30CAL

Digimatic MIC 0-25 mm No-Output.

Manufacturer: Fowler Brand: Fowler

6 /150mm IP54 Electronic Depth Micrometer Includes: Fitted Case Features: Resolution: .00005 /.001mm Range: 0-6 /150mm Hardened tool steel, precision ground and microlapped 4 base Rod diameter: .176 Protected to IP54 standards Automatic switch off Large LCD display

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 06ADV380G

Mitutoyo Input Tool, Use for: 21EAA194 and 21EAA190 style cables, Cable Length: 2m, Convert: Mitutoyo SPC to USB 2 input

Manufacturer: Fowler Brand: Fowler

Includes wrench and case Travel Tubular Inside Micrometers measure inside dimensions precisely and accurately. Features Carbide faced measuring tips are spherical to make positive point contact against the inside wall surface. Anvil and spindle are hardened and precision ground with microlap finish on ends. Spindle thread hardened, ground & lapped. Accuracy: .00036" Microfine graduations (.001") on a satin chrome finish permit easy reading. Positive locking nut Each micrometer can also be used as an adjustable linear standard bar within each range. Quick, easy zero adjustment on the sleeve. Meets or exceeds Federal accuracy specs. It is recommended for optimal accuracy that the inside micrometer be calibrated by a gage blocks or ring gage.

Manufacturer: BENETECH Brand: Benetech

Features & Functions: 1. Auto calibration to assure the accuracy. 2. Auto linear compensation: this advanced software program enhances the precision by correcting the non-linear accuracy of transducer. 3. Make a quick adjustment for the sound velocity / thickness, and a quick recall to the stored data 4. Coupling status indication: Observing the coupling icon to learn if the coupling is accomplished or not. 5. 12 thickness measurement storage and recall function available, which facilitates the height work or working in wild area. 6. Sound velocity measurement. 7. 12 sound velocity for different material which is also adjustable . 8. Thickness alarm setup. 9. LCD backlight display. 10. Low battery indication and auto power off. 11. Metric/imperial selection. Specifications: Measuring Range: 1.00~300mm(steel) Accuracy: ±(1%H+0.1)mm, H denotes the measured thickness. Working frequency: 5MHz Resolution: 0.01mm(1.00 to 99.99mm); 0.1mm(100 to 300mm) Mininum limit for tube measuring(steel): ?15 * 2.0mm(?6mm transducer), ?20 * 3.0mm(?10mm transducer) Sound velocity Range: 1000~9999m/s, When the given thickness is under 20mm, the accuracy is ±1mm/H * 100%; when the given thickness is over 20mm, the accuracy is: ±5% General Characteristics: Operation temperature/humidity: 0 to 40°C, ?90%RH Power supply: 3*1.5V AAA alkaline batteries (not included) Item Size: 15 * 8 * 3cm/ 6 * 3 * 1.2in Item Weight: 243g / 8.81oz Package Size: 25.5 * 17.5 * 5cm / 10 * 6.8 * 2.0in Package Weight: 495g / 1.1lb Package List: 1 * Thickness Gauge 1 * ?6 Transducer 1 * ?10 Transducer 1 * 4mm Sampling Block 1 * English Manual

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: White

Essential for the workshop, but also in the inspection room or measuring laboratory - Ideal for comparative measurement on a surface plate - Detect form and position errors - Measure axial and radial runouts, especially. Technical features: long range up to 3mm, bidirectional measurin, without reversing lever, continuous two-way clockwise rotation of the pointer, swivelling probe through 180 degree, main pivot on oversize, self-aligning angular bearings, dovetail mounting machined in the indicator body, dull-chrome plated bezel and housing, rotating dial, insensitive to magnetic fields generated in common precision mechanics. Note for use of compac dial test indicators: with the measuring insert lying parallel to the workpiece surface, these dial test indicators give true reading due to the amplification factor to 1:1. In any other measuring position, the effective lever length changes so that the read value need be corrected. With respect to this, also read in the instruction manual. Tesa design swiss made. Standard DIN 2270 and factory standard. Friction lever system to preventing overload. Contact points with tungsten carbide ball tips. Delivery in a suited plastic case including: 1 contact point, 2mm dia, 1 rigid stem with 8mm dia, L = 15mm No. 01840107. 1 rigid stem with 4mm dia, L = 15mm No. 01840109. Identification number. Inspection report with a declaration of conformity.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-860-114-0

The Fowler 54-860 series digital outside micrometer has a ball anvil and flat spindle pair, a choice of measuring range, and an LCD with an inch/metric switchable resolution for measuring the inside diameter of sleeves, collars, tubing, and other curved and cylindrical surfaces. The ball anvil contacts the inside curve at a single point, providing accurate measurements. Carbide measuring faces provide wear resistance. A switchable resolution of 0.00005" and 0.001mm, and an accuracy of 0.00016"/0.004mm on 1 to 2" micrometers provide precise readings and accurate measurements. A friction thimble provides smooth and quiet operations, and is suitable for one-handed operation. Friction-style thimbles stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The insulated steel housing provides durability and is Ingress Protection (IP) certified IP54 for protection against dust and water. The LCD has a hold feature that saves the reading for recording. The micrometer can be set to take absolute or incremental measurements. Absolute measurements provide the total dimension of the workpiece. Incremental measurements provide a reading that shows the difference between a set standard and workpiece being measured. This type of reading is often used to determine if a workpiece falls within tolerance levels. RS-232 output transfers data to a computer (cable not included). The micrometer requires a Type 357 battery (included), and includes a fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay typeLCDAnvil/spindle styleBall anvil and flat spindleMeasuring rangeVariesResolution0.00005"/0.001mmThimble styleFrictionAnvil/spindle diameter0.250"/6.35mmData outputRS-232SpecificationsIP54PowerType 357 batteryMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial...

Manufacturer: BOSCH Brand: Bosch

Vertical alignment of pipes Levelling electric sockets, cable trays, radiators and pipe installations Levelling and aligning doors and windows Vertical side fan angle 240 ° Accuracy ±2 mm at 10 m Automatic switch-off Yes Battery type 4 x 1.5 V (AA) Dimensions (LxWxH) 124 x 124 x 187 mm IP protection class IP 54 (IEC 529) Laser class < 1 mW, 635 nm, Class 2 (IEC 60825-1:2008), Class II (FDA CFR 21 art. 1040) Laser functionality Square, Level, Align, Plumb Laser line width at 5m distance < 2 mm Low battery indication Yes Operating temperature range -10 - 50 °C Operating time with alkaline battery 8 h Out-of-level warning Yes Plumb type Plumbing and additional horizontal and vertical alignment Self-levelling range at room temperature ±3 ° Tripod thread diameter 1/4 in, 5/8 in Weight with batteries 990 g Horizontal fan angle 180 ° Vertical front fan angle 140 °

Manufacturer: Western Instruments Brand: Western Instruments

The Western Instruments N88-2-I Inch Basic Pit Gauge, Centre Mount 2.5" (64mm) Blade, Complete Kit is a precision instrument that allows the Corrosion Inspector to conveniently measure Pit Depth or material loss in areas of Weight-Loss Corrosion. Western Instruments Pit Gauges assure compliance with Corrosion Alliances for equipments wherever corrosion affects materials such as Pipeline, Vessels, Piping, Storage Tanks, Oil Country Tubular Goods, Drill Pipe, Bottom Hole Assemblies, Bridges and Structures, Shipping, Concrete, and Aircraft Components.