Dimensional Measurement - Page 1280

Manufacturer: INSIZE Brand: INSIZE Model: ISM-ZS50-OB2X

Auxiliary objective, 2x.

Manufacturer: INSIZE Brand: INSIZE Model: 2164-25A

Electronic 3-purpose snap gage, 0-1"/0-2.

Manufacturer: Linsen Tool Co.,LTD Brand: Linsen

Each set of Metric thread plug gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO.We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 118-120

The Mitutoyo 118 series sheet metal micrometer has a deep-throated frame for measuring thickness of sheet metal, paper, plastic, or rubber parts, and a vernier scale in inch units for taking precise outside diameter (OD) measurements. A ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurement. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001” or 0.0001”, depending on the model, with a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: INSIZE Brand: INSIZE Model: 3232-3

Blade micrometer, 2-3", graduation 0001".

Manufacturer: Starrett Brand: Starrett Model: 2000SCKB

The Starrett 2000SCKB 6-foot smartcable connects the Starrett 2000-24 height gauge to a computer or keyboard for data input. The smartcable has a USB 2.0 connector and a Starrett 2000 series connector, and an LED light to indicate status. The USB 2.0 connector on one end connects to a computer or keyboard; the Starrett 2000 series connector on the other end connects to the height gauge. The cable inputs data using one of two operating modes: static (normal) or dynamic (Min/Max/TIR). The Starrett 2000SCKB smartcable is an accessory for use with the Starrett 2000-24 height gauge, which is an electronic, digital, measuring device.Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 9150-0160

Manufacturer: INSIZE Brand: INSIZE Model: 1253-200

Vernier Height gage, 0-8"/0-200mm, graduation 001" 0/02mm.

Manufacturer: Newtry Brand: Newtry®

Usually the product should take about 6--13 business days to arrive your hand after your payment is confirmed Major performances Type D: applicable to hard rubber, hard resin, acrylic, glass, cushiony plastic cement, printing plates, fiber, etc. This hardness gauge conforms to the regulations of GB/T531-99, GB2411-80, hg/t2489-93, JJG304-2003. Technical Parameter Types: Type D Calibration Value:0-100HD Resolution :1 HD Pressure Head Size:Φ1.25 mm End pressure of Pressure Head:0-44.5 N Pressure Needle Range:0-2.5 mm Apparatus Weight:0.3 Kg Attention:  we will send the product to you as soon as possible  If you have any questions , please feel free to contact us 

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 123-101

The Mitutoyo 123 series disk micrometer has disc-shaped measuring faces with flanges for measuring the pitch of gear teeth, a vernier scale in metric units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment.The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm, and has a satin chrome rust- and glare-resistant finish. The diameter of the measuring discs is 20mm. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.