Dimensional Measurement - Page 1284

Manufacturer: Westward Brand: Westward

Precision Measuring Tool Kit, Number of Pieces 4, Micrometer 0-1 In/.0001 In, Ratchet, Chrome, Caliper 0-6 In,Shockproof,Chrome, Includes Micrometer, Caliper, Depth Micrometer, and 2YNF4 6 In Steel Rule

Manufacturer: INSIZE Brand: INSIZE Model: 3221-20

Tubular inside micrometer, 8-20", graduation 001".

Manufacturer: Tlegend Instrument® Brand: Tlegend Instrument

The product usually takes 7--13 business days to arrive to your hand after your order is confirmed Product Description Micrometers furnished with setting ring. For measuring various inside dimensions. Technical Datas Type:25-50mm NOTE: we will send the product to you as soon as possible If you have any questions , please feel free to contact us

Manufacturer: Fowler Brand: Fowler

Features All supplied in a high quality aluminum case. Setting Device Base anvil: 2.750" x .80" (2) Adjustable anvils: 2.375" x .375" Internal capacity: 0 ~ 6" (0 ~ 150mm) Depth capacity: 0 ~ 1" (0 ~ 25mm) Centralizer capacity width: 2.625" (66.7mm) Quick-release holder for fast adjustment. Economy Gage Block Sets 36 Piece Inch Model Tolerance: ±.00005" Certificate of Calibration to N.I.S.T. 33 Piece Metric Model AS-2 grade. Certificate of Calibration to N.I.S.T

Manufacturer: Starrett Brand: Starrett Model: 657TW

For use with all Starrett Test, Back-Plunger, AGD, Dial, and Miniature Dial Indicators. Also accommodates similar indicators of other manufacturers. The flexible post is an assembly of short tubular steel sections and precision ball joints, linked by an internal steel cable. It can be adjusted to any position and locked by turning a lever near the magnetic base. This makes it possible to use indicators in awkward places that are hard to reach with conventional holding devices. Assembled to the magnetic base, the post has a vertical reach of approximately 15" (380mm) and a horizontal reach of approximately 10" (250mm). The indicator snug on the end of the post can be rotated through 360 degree and locked in any position. The base has three precision ground magnetic contact surfaces. Grips horizontally, vertically or upside down. V-step holds base to arbors, shafts, chucks. The No. 657W Attachment allows fine adjustments to be made, operated by turning the fine-adjusting thumb screw (with post locked in rigid position) to zero, then set the indicator. Gauge Rod: 3/8" x 3" has 5/16, 1/4 and 7/32" steps, holds nos. 708, 709, 711 and 811 dial test indicators by body clamp.

Manufacturer: Mitutoyo Brand: Mitutoyo

Technical Specification Item Electronic Digital Indicator Series 543 Resolution .0005/0.01mm Accuracy .001 Range 0.500/12.7mm Bezel Rotates 330 Degrees Features Absolute Encoder Scale, On/Off, Zero-Set, Preset, Go/No Go, Change Counting Direction, FX=AX Function, Inch/Millimeter Functions and SPC Output Port with Dust Cap, Flat Back Includes Battery Compliance & Restrictions Compliance and Restrictions None This listing is for each. Features As compact as standard Series 2 dial indicators Large, easy-to-read LCD GO/?NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/?NG) can be displayed in full-size characters The positive/negative count resulting from the spindle?s up/down movement can be toggled Internal calculations using the simple formula of [F(x) = Ax)] are available Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle 'Absolute Position' from the origin at power-on. Also unlimited response speed eliminates over-speed errors The ID-C indicator face can be rotated 330? to an appropriate angle for easy reading With SPC data output SPC cables: 905338(1m) or 905409 (2m) ModelID-C1012EXAccuracy.001Range.5 / 12.7mmResolution.0005/0.01mmMeasuring force0.9N or lessOrder No.543-402B

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-390B

Mitutoyo IDC Digimatic Indicator, Resolution: 0.001mm/0.01mm Range: 12.7mm, Stem diameter: 8mm, Back: Flat back, Output: Yes, Face rotation: 330°, Functions: Origin-set/Preset, Zeroset, GO/±NG judgment, Counting direction switching, Power On/Off, Data o

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-455-015-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: INSIZE Brand: INSIZE Model: 1250-300

Vernier Height gage, 0-12"/0-300mm, graduation 001" 0/02mm.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 137-216

The Mitutoyo 137 series tubular vernier inside micrometer includes a set of extension rods with anvils for a diversified range of measurement measuring inside dimensions (ID) of cylinders, rings, and parallel surfaces. It has a vernier scale in inch units for taking precise ID measurements to 0.001”, and a satin chrome rust- and glare-resistant finish. The micrometer head has a travel of 0.5” per revolution that helps provide fine positioning. The solid extension rods help provide durability, and the measuring faces are carbide-tipped for wear resistance. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.