Dimensional Measurement - Page 1288

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 201-102

Recommended dial indicator (optional): 2046SB (0.01mm reading), 2109SB-10 (0.001mm reading); Gauge stem diameter: 8mm; Measuring force: 15N +/- 3N; Parallelism: 5 micrometer or less; Anvil flatness: 0.00004" / 1 micrometer.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-394B

Display: LCD, length standard: absolute electrostatic capacitance type linear encoder, max. Response speed: unlimited, measuring force: refer to the list of specifications, battery: sr44 (1 pc.), 938882, battery life: approx. 5,000 Hours under normal use, dust/water protection level: ip42 or ip53 (dust-proof type) origin-set/preset, zeroset, go/+/-ng judgment, counting direction switching, power on/off, data output, inch/mm conversion (on inch/metric models only).

Manufacturer: INSIZE Brand: INSIZE Model: 7306-40

Wireless data transmitter for electronic indicator.

Manufacturer: Starrett Brand: Starrett

Height Gage, Electronic Digital, Range 0-6 In/150mm, Resolution 0.0005 In/0.01mm, Accuracy +/-0.001 In, Display LCD, Features Zero Set, Hold/Data, Inch/Millimeter, Construction Hardened Stainless Steel, Base Cast Iron, Screw Clamp Lever Locks Scriber at any Position, Mechanism Thumb Roll, Battery One 3-Volt CR2032, Includes Scriber Electronic DigitalFunctions include inch/metric conversion, automatic On/Off, zero set, and hold. Include scriber. All have SPC output except 2ZUG7. SPC cables sold separately, see page 3652.Electronic and Dial Height Gages

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-431

The Mitutoyo 511-431 Dial Bore Gauge for Blind Holes has a measurement range of 0.6 to 1.4" and is accurate to + or - 0.0002". It is precise to 0.0005" and can measure internal diameters at positions close to the bottom of blind holes. This direct-measuring uses a two-point contact system to detect geometry problems such as ovality and taper, and carbide-tipped contact points provide extended wear and improved abrasion resistance. A rugged cover protects the dial indicator.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Checkline Brand: Checkline

The HP-2.5 Textile Durometer with 2.5mm Indenter is a precision instrument that accurately measures the winding density of textile bobbins, beams, spools, spindles, cones, quills, dye packages, rolls, etc.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 547-217S

The Mitutoyo Series 547 ABSOLUTE Digimatic LCD Depth Gauges, Indicator Type, Inch/Metric, depending on the model, have a measurement range of 0 to 8" (0 to 200mm), a stroke (or travel distance of the indicator) of 0.5", and a resolution (or smallest graduation interval) of either 0.0005" (0.01mm) with + or - 0.001" of accuracy, or 0.00005" (0.001mm) with + or - 0.0003" of accuracy. The LCD screen displays in both inches and metric, and can keep track of the origin point for the life of the battery (about 3.5 years under normal use). The gauges come with four measuring extension rods for flexibility. The bases of the units (either 2.5" or 4"long) are hardened, ground, and lapped for durability and accuracy. The units support Mitutoyo's data output signal (SPC Output) for devices. Optional SPC cables for use with Mitutoyo devices and extension rods are sold separately. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: 683M-1Z

These gauges directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gauge should read the set number stamped on the back of the indicator. In case of wear, the gauge may be adjusted to read the proper number.

Manufacturer: Starrett Brand: Starrett Model: 689M-2Z

Starrett Countersink Gauges are offered in three different angles so that the gauge sets on the angular side of the countersink, as opposed to a chamfer gauge which sets on the top edge of the chamfer. This gauge directly reads the large diameter of the countersink in 0.002" or 0.05 mm increments. A set master ring is furnished with each gauge for calibration and setting. Press the button on top of the indicator to firmly depress the gauge head into the countersink. When the gauge is removed, the indicator reading is held in place until the reset button is activated.

Manufacturer: INSIZE Brand: INSIZE Model: 6550-2A

Electronic zero setter, Height 2 inch.