Dimensional Measurement - Page 1289

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-280B

Accuracy: Refer to the list of specifications. Length standard: ABSOLUTE electrostatic capacitance type linear encoder. Max. response speed: Unlimited. Data output (-NG/OK/NG signal, NPN open collector), Remote control (hold-preset, preset-recall, zero-set), Origin-set/Preset, Zeroset, GO/+/-NG judgment, Max/Min/ Runout value holding, Counting direction switching, Power ON/OFF, inch/mm conversion (on inch/metric models only). Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error. Measuring force: 2.0N or less, Data output (-NG/OK/NG signal, NPN open collector), Remote control (hold-preset, preset-recall, zero-set), Origin-set/Preset, Zeroset, GO/+/-NG judgment, Max/Min/ Runout value holding, Counting direction switching, Power ON/OFF, inch/mm conversion (on inch/metric models only) Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 145-217

The 145 series vernier inside micrometer has caliper-type jaws and a vernier scale in metric units for making precise inside dimension (ID) measurements. The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The vernier scale is graduated to 0.01mm. A locking clamp helps hold measurements in place. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 139-180

The Mitutoyo 139 series tubular vernier inside micrometer includes a set of extension pipes with anvils for a diversified range of measurement measuring inside dimensions (ID) of cylinders, rings, and parallel surfaces. It has a vernier scale in inch units for taking precise ID measurements to 0.001”, and a satin chrome rust- and glare-resistant finish. The micrometer head has a travel of 1” per revolution that helps provide quick positioning. The hollow, tubular extension pipes help provide light weight with rigidity. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-406

Large, easy-to-read LCD. Internal calculations using the simple formula of [F(x) = Ax)] are available. With SPC data output. Stem diameter 3/8" 4-48 UNF (Unified Fine Thread) Thread size. Length standard: ABSOLUTE electrostatic capacitance type linear encoder. Max. response speed: Unlimited. Battery: SR44 (1 pc.), 938882. Battery life: Approx. 5,000 hours under normal use Dust/Water protection level: IP42 or IP53 (dust-proof type). Measuring force: 0.2N - 0.5N.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-262

The Mitutoyo 368 series Holtest vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in inch units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0001” or 0.0002” depending on the model. The measuring faces are carbide-tipped or TiN-coated for wear resistance depending on the model. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: M&A INSTRUMENTS INC Brand: M&A INSTRUMENTS INC Model: UM-2 Color: Black

Standard package: •UM-2 thickness gauge •Probe (PT-08) •Carrying case •Two 1.5V AA alkaline batteries •Couplant •Operating manual •Certification of quality •Packaging list •Operating principle:Ultrasonic pulse/echo method with dual-element probes •Probe zero adjustment: Selectable:1-point calibration: normal measurement 2-point calibration: curve surface measurement or other special application with a high precision •V-path correction:Automatic •Measuring range:0.8mm to 300mm; 0.031in to 11.81in Depending on probe, material andsurfacecondition •Digital resolution: H＜4in : 0.001in /0.01in or0.01mm/0.1mm H≥4in : 0.01in or 0.1mm •Units:Selectable: inch or mm •Display:128×64 dot-matrix LCD screen (1.65in×2.24in; 42mm×57mm) EL backlight and switchable contract ratio Digit height: 0.54in or 13.75mm •Measurement update rate: 4Hz in standard measurement mode 25Hz in MIN capture mode •Material velocity range: 1000 to 9999 m/s; 0.039 to 0.394 inch/µs •Power:Two 1.5V AA alkaline batteries Warning with low battery voltage •Operating time: Up to 200 hours (without backlight) with alkaline batteries, depending on operating mode •Auto shut-off: After 5 minutes of non-use •Operating temperature:-10℃ to +50℃; +14℉ to +122℉ •Data logger capacity: Up to 500 readings can be divided into a maximum of 5 files •Operating language:English &Chinese •Measuring error: Up to 1in:±0.002in or ±0.05mm Above 1in: ±0.5%H H is the height of the testing object •Repeatability:±0.001in or ±0.025mm

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-866

The Mitutoyo 368 series Holtest (Type II) vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in inch units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability, and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0002”. The measuring faces are made of hardened steel and the micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-481B

The absolute digimatic indicator performs internal calculations using the formula AX+B+CX-1 (assuming spindle displacement as X) while the specified coefficients a, b and, c can be set with respect to the purpose of measurement or dimensions of the fixtures. This unique features allows you to read your measurements directly, without fumbling for conversions.

Manufacturer: MARS Brand: Mars

Features- Coincidence focusing system 15 x eyepieces One position instrument. Measure both meridians without changing optical system Simple vertical adjustable head to fit patient Astigmatic axis 0 to 180 degree Dual eye level sighting system Dioptre 36 - 52 (in 0.25 steps Paint finish : black or white The achromatic optical systems to precise measurement of the corneal radius curvature and accurate measurement of radius curvature of contact lensStandard accessories Dust cover One spare bulb

Manufacturer: MARS Brand: Mars Model: MARS1975

Features- Coincidence focusing system 15 x eyepieces One position instrument. Measure both meridians without changing optical system Simple vertical adjustable head to fit patient Astigmatic axis 0 to 180 degree Dual eye level sighting system Dioptre 36 - 52 (in 0.25 steps Paint finish : black or white The achromatic optical systems to precise measurement of the corneal radius curvature and accurate measurement of radius curvature of contact lensStandard accessories Dust cover One spare bulb