|
|
-
3.7 of 5.0 with 42 Reviews
SALE PRICE: $550.00
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Flexbar Micro Snap Gages. These Precision Gages offer Precise Measurements of Diameter, Thickness, length, Grooves, Gear Tooth width and PCD of gears. Three versions are offered depending on Measurement application. Dial indicator Not included, order separately
-
3.7 of 5.0 with 4 Reviews
SALE PRICE: $557.87 1% OFF
Manufacturer: Checkline
Brand: Checkline
Manufacturer: Checkline
Brand: Checkline
5mhz, 10mm Transducer for TI-45N and TI-40N Ultrasonic Thickness Gauges  Features  5mhz, 10mm Probe 39" Cable with 2 LEMO Connectors
-
3.7 of 5.0 with 11 Reviews
SALE PRICE: $565.00
Manufacturer: Starrett
Brand: Starrett
Model: 684-4Z
Manufacturer: Starrett
Brand: Starrett
Model: 684-4Z
These gauges directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gauge should read the set number stamped on the back of the indicator. In case of wear, the gauge may be adjusted to read the proper number.
-
3.7 of 5.0 with 22 Reviews
SALE PRICE: $567.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-282B
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-282B
|
The Mitutoyo 543-282B Absolute Digimatic electronic indicator gauge, ID-C series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications in harsh environments. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.00005" (0.001mm), and an accuracy of + or - 0.00012". The LCD screen displays measurements in inches and metric units. The indicator has a go/no-go display that lights green or red, respectively, when upper and/or lower tolerances have been set. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. It has a flat back for stem mounting or plate mounting on the rear of the indicator. An Absolute electrostatic capacitance-type linear encoder helps prevent overspeed errors and ensure accurate measurements. This model is Ingress Protection certified IP54 for protection against dust and water. Additional functions for this indicator include remote control, max/min/runout value holding, origin set, preset, zero set, counting direction switching, and alerts for low voltage, counting value composition, overflow, and tolerance limit setting errors. The measuring force is 2.0 Newtons (N) or less. This unit comes with a built-in power cord with exposed wires at the end for wiring into a device such as a programmable logic controller (PLC) (sold separately) for power and communications. This gauge can output the judgment signal using the included 4m cable.SpecificationsRange0 to 0.5" (0 to 12.7mm)Resolution0.00005" (0.001mm)Accuracy+ or - 0.00012"Measuring force2.0N or lessStem#4-48 UNF contact point thread mount with 3/8" diameter stemFaceLCD displays in both inches and metric units, green or red lighting displays go/no-go judgment, with flat backData input/outputSignal input (remote control) and judgment signal outputDimensions127.85 x 60.5 x 36.1mm (H x W x D)Weight335gStandardsIP54Power sourceBuilt-in power cordH is height, the vertical distance from the lowest to highest point with stem at rest; W is width, the ho...
-
3.7 of 5.0 with 7 Reviews
SALE PRICE: $615.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 688-1Z
Manufacturer: Starrett
Brand: Starrett
Model: 688-1Z
Starrett Countersink Gauges are offered in three different angles so that the gauge sets on the angular side of the countersink, as opposed to a chamfer gauge which sets on the top edge of the chamfer. This gauge directly reads the large diameter of the countersink in 0.002" or 0.05 mm increments. A set master ring is furnished with each gauge for calibration and setting. Press the button on top of the indicator to firmly depress the gauge head into the countersink. When the gauge is removed, the indicator reading is held in place until the reset button is activated.
-
3.7 of 5.0 with 36 Reviews
SALE PRICE: $617.38 24% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 368-168
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 368-168
|
The Mitutoyo 368 series Holtest vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in metric units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.001mm or 0.005mm depending on the model. The measuring faces are carbide-tipped or TiN-coated for wear resistance depending on the model. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
3.7 of 5.0 with 44 Reviews
SALE PRICE: $645.35 71% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 368-911
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 368-911
|
The Mitutoyo 368-911 Holtest three-point micrometer set has TiN-coated measurement points, a measurement range of 6-12 mm and is precise to 0.001 mm, with + or - 2 micrometers of accuracy. Titanium nitride (TiN)-coated measuring contact points offer durability and impact resistance, while contact point geometry allows the instrument to measure to the bottom of a blind hole. The ratchet stop offers constant force for repeatability. Includes inspection certificate ensuring that the exact micrometer purchased has met National Institute of Standards and Technology master standards. This gage set includes three complete display units, two setting rings, extension rod, and a fitted plastic case. Bore gages measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gages are typically calibrated with a setting ring. Bore gages come in two types, one simple, and the other direct-measuring. Simple bore gages are used with a caliper to transfer the hole measurement, while the more complex gages take the measurement directly, and display the measurement through a vernier, dial, or digital display. Bore gages have a two- or three-point contact, which indicates how many points on the gage head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point systems are used to measure lobing, or triangular form error. Pistol-grip bore gages are used for fast, single-handed operation with good repeatability from one operator to another. Bore gages, regardless of type, can be used in some special applications, such as measuring threads, spline pitch diameters, and deep bores. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL. What’s in the Box? Mitutoyo 368 series 6-8 mm three-point internal micrometer ...
-
3.7 of 5.0 with 42 Reviews
SALE PRICE: $669.80 7% OFF
Manufacturer: Omni Optical Products
Brand: Survey Pro
Model: 5610-02
Manufacturer: Omni Optical Products
Brand: Survey Pro
Model: 5610-02
|
Telescope Image: Erect Magnification: 30x Objective aperture: 45mm Resolving power: 30″ Field of view: 1 30′ Minimum focus: 1.4m Multiplication constant: 100 Additive constant: 0 Tube length: 157mm Angle measurement Measuring mode: Absolute Encoding Diameter of circle: 79mm Minimum reading: 1 /5 (selectable) Accuracy: 2″ Detection method Horizontal angle: Dual Vertical angle: Dual Valid distance: 120m Display Type: 2 sides, LCD Display DATA I/O Interface: RS-232C Level Plate level: 30″/2mm Circular level: 8″/2mm Auto Vertical Compensator System: Liquid-electricd etection 4″ Accuracy: Liquid-electricd etection: 1″ Optical plummet Image: Erect Magnification: 3x Focusing range: 0.5m~∞ Field of view: 5′ Physical Characteristics Operating temperature: -20 C ~+45 C Battery: RechargeableN i-Hb attery/AAb attery Voltage: 6vD C Operating time: 10hours Dimension: 165mm 157mm 318mm Weight: 4.3kg Water and Dust Proof: IP 55 Avalable Color - Tan, Green *We will ship what we have in stock if not specified
-
3.7 of 5.0 with 17 Reviews
SALE PRICE: $675.00 1% OFF
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
TWIN COLUMN ELECTRONIC HEIGHT GAGES.
-
3.7 of 5.0 with 18 Reviews
SALE PRICE: $688.00 1% OFF
Manufacturer: WRN
Brand: WRN
Manufacturer: WRN
Brand: WRN
|
Product information:1.Ultrasonic Thickness Gauges are designed to improve safety and ensure reliability of material subject to corrosion or erosion. 2. Corrosion gauges with their dual-element transducers are the primary inspection tool used to measure the remaining walls of components such as pipelines, pressure vessels, storage tanks, and numerous other applications. 3.Precision gauges use single-element transducers to provide the thinnest range and highest degree of accuracy possible. 4.Common applications include metals and a variety of non-metals (i.e. glass, ceramic, plastic, etc.). Specification:1.Measuring Range:0.75mm-300mm(in steel) 2.Sound Velocity:1000~9999 m/s 3.Resolution:0.1/0.01mm (selectable) 4.Units:mm/inch (selectable) 5.Storage:20 groups (100 files / group) 6.Accuracy:± ( 0.5%Thickness+0.04 ) mm 7.Alarm:preset upper and lower limit 8.Work voltage:3V( 2 AA alkaline battaries) 9.Interface port:RS232 serial port 10.Dimensions:132mm*76mm*33mm 11.Weight:345g 12.Display:LCD with backlight 13.Continuous working period:100 hours (with backlight off)Pls remark which Transducer do you need when placing order The shipment will be arranged in 1-3 working days( not including customized product), and takes about another 3-9 working days to reach you.
Viewing Page 1291 of 1520
|
|