|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $149.95 1% OFF
Manufacturer: Jb Industries
Brand: JB Industries
Manufacturer: Jb Industries
Brand: JB Industries
JB Industries, DV29, J/B MICRON GUAGE BLANKOFF TEST UNIT, J/B MICRON GUAGE BLANKOFF TEST UNIT
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $150.00
Manufacturer: Starrett
Brand: Starrett
Model: H823C/D/E
Manufacturer: Starrett
Brand: Starrett
Model: H823C/D/E
Starrett 823 Micrometer Head Only for 823C, 823D, 823E.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $150.00 13% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 210AP
Manufacturer: Starrett
Brand: Starrett
Model: 210AP
This Micrometer is ideal for quick comparisons of thread accuracy in screw cutting operations, measuring in small grooves or recesses where regular micrometers cannot be used, and for many other applications. It is 60 degree conical anvil and spindle faces with 1/64" flat on the ends of the point. Quick and easy adjustment.
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $150.00
Manufacturer: Vermont Gage
Brand: Vermont Gage
Manufacturer: Vermont Gage
Brand: Vermont Gage
Vermont Gage's NPT Tapered Pipe Ring Gages are used to check tapered external pipe threads. Perfect for inspecting standard pipe and pipe fittings.
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $150.71 16% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 293-349-30
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 293-349-30
|
The Mitutoyo 293-349-30 digital micrometer has a 0 to 1" (0 to 25.4mm) measuring range with 0.00005" (0.001mm) increments for precision and a friction thimble stop with carbide-tipped measuring faces for consistent measurement. Its digital readout LCD shows inch or metric units for versatility and a Hold button saves a measurement for reading later. The digital micrometer is Ingress Protection certified IP65 for protection from dirt and water and includes a protective case and SR44 silver oxide battery.Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.What's in the Box?Digital micrometerSR44 batteryProtective case
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $151.00 16% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 293-348-30
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 293-348-30
MIC, Digimatic, 0-1", IP65.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $151.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 3808MA
Color: Yellow
Manufacturer: Starrett
Brand: Starrett
Model: 3808MA
Color: Yellow
The Starrett 3808 precise, high quality test indicator offers a full complement of standard features. Indicator includes two dovetail clamps and case.
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $152.00
Manufacturer: Fieldpiece
Brand: Fieldpiece
Color: Multicolored
Manufacturer: Fieldpiece
Brand: Fieldpiece
Color: Multicolored
|
Designed specifically for HVACR professionals, the SRH3 InDuct Diagnostic Psychrometer is a great tool to properly charge fixed restrictor systems. More than 70% of A/C units are improperly charged, and therefore running inefficienty, but with the SRH3 it's easier to ensure units are running at their maximum efficiency. The SRH3 InDuct Psychrometer is a great tool to properly charge fixed restirctor systems by quickly determining the target superheat, and to help determine optimum airflow across the evaporator with a target evaporator exit temperature test. To assist HVACR professionals get the proper measurements, Fieldpiece engineered this in-duct psychrometer to take measurements in the duct where they are supposed to be taken -- near the evaporator! The 38" telescoping probe's laser etched ruling and flattened edges allows techs to locate proper measurement points within a duct, and ensures that the probe is properly aligned. With the quick sensor it's a snap to determine target superheat, and take target evaporator exit temperature tests. Competitive Advantages Like all Fieldpiece products, the SRH3 digital psychrometer was engineering specifically for HVACR professionals. It contains the specific measurements and tests techs need, without any they don't. Because it automatically calculates target superheat and target evaporator exit temperature, PT charts and written math are a thing of the past. Plus the dual display with bright backlight, and rugged rubber boot with probe clips make sure the SRH3 is ready for any job.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $152.28 11% OFF
Manufacturer: Starrett
Brand: Starrett
Model: S831EZ
Manufacturer: Starrett
Brand: Starrett
Model: S831EZ
The Starrett S831EZ set of four small hole gauges measures 0.125 to 0.5"/3.2 to 12.7mm holes, slots, grooves, and recesses in woodworking, metalworking, machining, layout, and pattern-making applications. The four gauges measure from 0.125 to 0.2", 0.2 to 0.3", 0.3 to 0.4", and 0.4 to 0.5". Each gauge has a half-ball measuring surface with flat base that is hardened and ground for two-point contact in shallow slots and recesses. A safety stop prevents each gauge from adjustment beyond its range. A lock at the end of the handle secures the gauge width for measurement with a micrometer (sold separately). The gauge set comes in a protective case for storage. The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA. What's in the Box?(4) piece small hole gauge setProtective case
-
5.0 of 5.0 with 5 Reviews
SALE PRICE: $152.75 51% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 445AZ-6RL
Manufacturer: Starrett
Brand: Starrett
Model: 445AZ-6RL
|
The Starrett 440, 445 Vernier Depth Gauges, Ratchet Stop, Lock Nut, Micrometer Type, Inch, depending on the model, have a measurement range of 0 to 3", 0 to 6", 0 to 9", or 0 to 12"; a resolution (or smallest graduation interval) of 0.001"; with + or – 0.0001" of accuracy. The vernier scale enables precise measurements in fine units. These gauges include 1/8" diameter measuring rods to cover the intended range. The bases are available in a choice of 2.5", 3", 4", or 6" long, and all measuring surfaces of these units are hardened, ground, and lapped for durability and accuracy. These gauges have a ring-type knurled lock nut, ratchet, and speeder for stability and to apply uniform pressure and make quick adjustments for precise measurements. These units include a protective case. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.
|
|